Buscar en el registro

EE went to work on the replacement of middle deck screen weighing approx 275lbs. While EE was on bottom deck (pushing screen up to get over feed lip), other EE's were pulling the screen out, when pulling out, the screen got caught on something, it got directed back into shaker, falling downward, striking EE leg.

Employee was disconnecting a small water line. When kneeling down/bending over employee felt a sharp pain in lower back (left side)

While employee was loading material in the pit, the employee hit a toe in the pit floor causing the loader to jerk. This incident occurred on 5/23/2024, but the safety department was not notified until 8/6/2024. When the employee was stating they now needed care.

Shoveling material off of belt, when they tossed the stone with shovel in hand heard a "POP" in left shoulder.

Cutting rubber skirting to put on screen deck, was cutting away from belt and knife slipped and went across EE's left leg.

Chute got backed up, hit with sledge hammer four times and hurt right shoulder. Unspecified sprain of right shoulder joint.

While transferring grease from one barrel to the other...the barrel slid and cut the forearm of an employee.

Working on the track of the skid loader with a crowbar. Got hand (baby finger) in harm's way and crushed / cut finger --- requiring 2 stitches

EE CLAIMS HE WAS INJURED AS A RESULT OF COMING INTO CONTACT WITH A TRUCK TAILGATE DUMPING MATERIAL INTO A HOPPER. EE DID NOT NOTIFY THE COMPANY UNTIL 10-20-97. EE'S LAST DAY WORKED WAS 10-21-9 7.

EE'S HAND WAS PINCHED BY A HYDRAULIC ARM WHILE CHECKING FOR A LEAK.

EE WORKING ON DUST SHIELD WHEN A PRY BAR CONTACTED LAGGING AND PINCHED THE EE'S FINGER AGAINST FRAME.

EMP WAS WORKING TOO CLOSE TO ANOTHER EMP WHO WASWELDING. EMP RECEIVED A FLASH BURN AS WELL AS A PIECE OF METAL IN RIGHT EYE.

EE WAS WORKING THE MAIN FEED BELT WHEN A BLOCK LODGED. EE GOT UP ON THE BELT AND PULLED THE BLOCK TOWARDS HIMSELF WHILE BEING BENT OVER. EE THEN GOT OFF THE BELT AND WHEN GOING TO STAND UP, FE LT PAIN IN THE LOWER PART OF HIS BACK.

EE WAS CLEANING A RETURN ROLLER ON FEED BELT OF POWERSCREEN WITH A PIECE OF METAL WHEN THE BELT PULLED THE PIECE OF METAL ALONG WITH HIS LEFT HAND INTO THE ROLLER.

EE WAS CUTTING A THICK PIECE OF RUBBER WITH A RZXX RAZOR KNIFE PULLING TOWARDS HIMSELF WHEN HE SLIPPED AND CUT HIS THIGH.

EMPLOYEE WAS REMOVING BOTTOM PIPE FROM CYCLONE. 3 BOLTS WERE REMOVED HOLDING THE PIPE. PIPE WAS RESTING INSIDE ANOTHER PIECE OF PIPE HELD BY A PEICE OF FLAT BAR WELDED TO THE SIDE. THE TOP PIP E BROKE FREE FROM THE FLAT BAR PINNING THUMB UNDER THE FLANGE.

EE WAS BETWEEN THE FRAME AND THE TIRE REPLACING AN AIR HOSE. HE TWISTED TO HIS LEFT TO REACH THE AIR LINE AND FELT A SHARP PAIN IN THE LOWER BACK.

EE WAS DESENDIGN THE LADDER OF HIS LOADER, LAST STEP IS A SWING STEP AND EE MISSED IT. FELT MUSCLE PULL BUT CONTINUED TO WORK THE REST OF THE DAY. LEG FELT WORSE AS DAY WENT ON, BY THE END OF THE DAY, LEG WAS SWOLLEN.

EMPLOYEE WENT OUT BEHIND SHOP TO LOOK FOR A PIECE OF STEEL & FELL ON THE ICE

EE WAS REMOVING THE CANISTER OFF OF THE FUEL TRUCK. WHEN HE TOOK OFF THE LAST BOLT THE CANISTER FELL AND HIT HIS LITTLE FINGER ON THE LEFT HAND.

EE SQUATTED DOWN TO PICK UP A 5 GALLON BUCKET OF SAND AND GRAVEL MIX. WHEN GOING TO PICK UP HE FELT A PAIN IN THE REAR OF HIS RIGHT LEG THE PAIN THEN SHOT UP TO HIS LOWER BACK.

EMPLOYEE WAS TAKING DRIVE SHAFT OUT FROM 96" SCRUBBER WHEN THE SHAFT SHIFTED AND PINCHED HIS HAND AGAINST THE WALL OF THE BUILDING CAUSING A CUT TO THE MIDDLE FINGER OF THE RIGHT HAND.

FELLOW EMPLOYEE WAS GRINDING BOLTS OFF OF CONVEYOR LACING WHEN A PIECE OF METAL DEBRIS HIT RIGHTEYE.

WHILE GRINDING ON A DOZER, A PIECE OF STEEL WENT INTO RIGHT EYE.

EMPLOYEE WAS INVESTIGATING A PROBLEM WITH LOOSE STEP AND TRIPPED. HE FELL AND HIT LEGS ON THE STEP.

79329NG UP CHUTE ON WASH PLANT, REALISED WAS TOO HEAVY DROPPED IT. NEXT DAY HIS BACK HURT.

39977ED OVER WELDING ROD IN FRONT OF MAINTENANCE SHOP.

68935 TRYING TO DISLODGE ROCKS FROM CHUTE WITH PRY BAR,GOT HIT ON BACK OF LEFT HAND WITH ROCK.

WORKING IN WELDER SHOP,GOT PIECE OF METAL IN RIGHT EYE.

BENT TOO CLOSE TO TRASH BARREL FIRE HIS PANTS AND CAUGHT ON FIRE

EMPLOYEE JUMPED OFF CONVEYOR BELT AND TWISTED ANKLE.

FELL OVER A PILE OF STEEL IN THE DAR. HE TURNED TOO QUICKLY AND DIDN'T REALIZE IT WAS BEHIND HIM.

WAS CUTTING PIECE OF BELT WHEN KNIFE SLIPPED AND CUT HIM ON THE LEG.

EMPLOYEE WAS BEATING A CHUNK OF IRON ORE AND A SMALLER CHUNK FLEW UP AND HIT HIM ON THE CHIN.

WORKING ON SHAKER, PC OF IRON OR FELL ON THUMB

EMPLOYEE WAS USING A GRINDER, WEARING GLASSES, A PIECE OF STEEL WENT INTO EYE.

TAKING 50 LB ROCK OFF CONVEY9R FRAME & IT FELL ON FINGER SMASHING IT BVETWEEN ROCK & CONVEYOR FRAME.

EE DROPPED SMALL BELLY PAN IT FELL ON HIS FINGER.

EMPLOYEE WAS SUPERVISING MATERIAL GOING INTO HOPPER WHEN A STONE FELL ON HIS TOE.

GRINDING & WELDING PIECE OF METAL WHEN SMALL FRAGMENT FLEW IN EYE.

EMPL LIFTING WATER HOSE AND IT JERKED HIS BACK OUT.

LABOR WAS DOING CLEAN UP ON GROUND A ROCK WAS DISLODGED OFF THE SCREEN TOWER BY ANOTHER EMP OVERHEAD FALLING OBJECT STRUCK LABOR ON THE HAND

EMPLOYEE AES TU9NING ON SWITCH GEAR FOR FRESH WATER PUMP AT SUPPLY POND FOR WASHING PLANT HE LOST HIS BALANCE TO REGAIN HE FELL ON H IS WRIST & HAND BREAKING & POSSIBLY CRUSHING TWO FINGERS

WAS REPLACING T2E BUCKET ON LOADER WENT OVER TO PICK UP A DIFFERENT PIN THAT WAS UNDER CUTTING EDGE LIFTED CUTTING EDGE CUTTING EDGE FELL ON FINGER.

CLIPPED ON SOME7HING AND DROPPED METAL BAR ON FOOT BREAKING BLOOD VESSEL.

GREASING DOZER AND SLIPPED ON TRACKS AND TWISTED ANKLE.

STEEL PLATE SLIPPED OFF SERVICE TRUCK AND FELL ON HIS TOE.