Buscar en el registro

The Injured Person (IP) was cleaning out the Roto-packer and bent over to cut a partially empty 50 lbs bag to discard remaining contents, and as the IP bent over, EE felt a pop in EE's lower back (left), and the IP had to take a minute before standing up straight. IP reported the incident to the Lead Operator. IP was taken to Urgent Care.

The employee was lifting an empty 55-gallon drum (~48 pounds). During this lift, the employee felt discomfort in left biceps.

Employee has a STS noise induced hearing loss per 62.174(b) in accordance with part 50 of the title.

EE's description, 'While cleaning up from a job at 4:50pm in Alesa 1 building I was putting away my tools. While trying to remove a bit from my drill. My glove became caught on the drill and spun my glove with my fingers backwards. This resulted in spraining my ring finger on my left hand. Gloves where brand new from issue less than an hour old.'

We were dumping the grinding media balls (metal balls) out of the CF1 Ball Mill into barriers (constructed of 4x8 plywood, etc). One of the balls bounced out of the barriers, bounced up and hit a supervisor in the forehead. It caused a laceration that required 5 stitches.

Temporary Employee got dust in left eye. Rinsed at eyewash station, continued to work. Reported to work the next day with eye still irritated. The employee had shoveled up dust into a bucket and upon dumping the bucket into a larger hopper, got dust into the eye. EE was wearing safety glasses but not safety goggles.

Spider bit employee's right ankle.

An operator was standing on the tracks of a bulldozer, when the operator inside the cab, accidentally hit the travel lever. The operator had foot pinched between the tracks and the dozer frame. EE broke 3 toes on left foot. One was removed at the hospital Friday night. Expected to make full recovery.

Employee dropped roll of plastic (90 lbs) when team-lifting the roll. The roll needed to be replaced on our stretch-wrap system. Roll fell and struck top of right foot. Fracture to metatarsal bone.

Lab tech, moving 3 gallon buckets (weighing 7-10 lbs) from stacked on a pallet, to a pull cart. Some buckets that were stacked 5-6 high fell over onto him as he was kneeling. Buckets hit the employee in the head (wearing hardhat). Headache resulted. No other injuries. Became a Lost Work Incident on August 15th (Dr. gave 10 Days Off).

The mill had 2 scall man doors removed for maintenance. The repairman entered through the upper door via a ladder. He accidently put one foot into the lower door hole, lost his balance and fell onto his left side inside the mill. He was the first person to enter the mill and had not yet put a temporary light in place or covered the lower door hole. He has a torn rotator cuff.

The production utility man was disconnecting a 4" vacuum hose from a manifold and when it came loose it hit him on the lower lip and caused about a 0.25" split. He was taken to the hospital where a doctor glued the cut closed. He was immediately released to go back to work.

A repairman was hammering a pin punch with a 20 Oz hammer to drive out a pin. The hammer glanced off the punch and traveled down and hit his thumb. The thumb sustained an open fracture on the tip of the thumb and a laceration of the nail bed. He returned to modified work with the use of his right hand only.

Mechanic was hammering a wedge to hold a crusher liner in place. Hammer glanced off of the wedge and traveled down and hit his other hand. He was supporting his weight with the hand that was struck. The position was slightly awkward and left his supporting hand in the line of fire. Working surface was somewhat unstable.

The worker went to a mill bin to get the cement to flow. He attached high pressure to the internal air pads and tapped on the bottom to loosen the material. While checking for flow at the discharge, the seal came out from under the holding seal band and blew cement on him knocking off his safety glasses and getting into his eyes.

A contract laborer was assisting cleaning up a lime spill with a shovel and a big bag with several others. After he went home he noticed a burns on the upper inside of his legs. He went to the doctor the next day and the doctor treated the burns and told him to come back in 2 days.

A contract laborer was assisting a lime spill cleanup with a vacuum hose. He noticed a burn on his neck later that evening and went to a doctor on monday. It appears that some lime dust got on his neck and reacted with body moisture.

EE WAS CALIBRATING A CEMEMTN PACKING MACHINE. THE 2 CALIBRATION WEIGHT WERE 25KG EA. AND EE WAS LIFTING THEM OFF TOGETHER. AS HE WAS LIFTING THEM OFF THE CRADLE, HE TURNED TO HIS LEFT TO EXIT THE PACKER WHEN HE EXPERIENCED PAIN IN HIS LOWER LEFT BACK. HE PAUSED AND THEN CONTINUED TO WALK AROUND AND SET THE WEIGHTS DOWN. ANOTHER WORKER WAS WATCHING AND NOTICED EE WINCING IN PAIN.

EE USED A WELDING ROD TO HOLD THE LARGE SOCKET ON THE WRENCH AS DID EVERYONE ELSE. AS HE WAS RELEASING ENERGY BY RUNNING THE WRENCH OUT OF AIR, THE WRENCH HE WAS HOLDING SLIPPED AND HIT THE MI LL AND BOUNCED TOWARD HIM. SPINNING SOCKET HIT HIS RIGHT KNEE AND THE WELDING ROD PUNCTURED HIS JEANS AND SKIN.

A REPAIRMAN WAS TOSSING 75 LB LINERS OUT THE MILL DOOR THAT WAS POSITIONED ON THE SIDE. THE LAST LINER HE THREW HIT THE SIDE OF THE DOOR FRAME AND BOUNCED BACK IN AND SMASHED 2 LEFT HAND FINGE R TIPS BETWEEN THE DOOR FRAME AND THE LINER. SOME BONE WAS REMOVED FROM THE TIP OF ONE FINGER AND BOTH FINGERS REQUIRED STITCHES. BOTH FINGER NAILS WERE REMOVED, TRIMMED AND THEN PLACE BACK.

EE WAS CHECKING A PUMP SYSTEM OUT FOR OPERATION AND NOTICED PRODUCT LEAKING FROM GASKET ON MAIN AERATION NOZZLE. HE KNEELED AND TURNED SIDEWAYS AND WAS LEANING AGAINST THE AIR MANIFOLD WHILE TIGHTENING A BOLT WITH SOME STRAIN WHEN HE FELT A POP IN HIS LEFT SIDE WHICH TOOK HIS BREATH AWAY AND SENT A SPASM THROUGH HIS BODY.

EMPLOYEE WAS BREAKING UP LUMPS OF CLINKER THAT WERE CLOGGING A GRATE. THE HANDLE OF THE MAUL SHATTERED AND A WOODSPLINTER FLEW UNDER HIS SAFETY GLASSES AND LODGED IN HIS RIGHT EYE.

THE INCIDENT OCCURED ON 3RD FLOOR OF PACK HOUSE. EE WAS REMOVING METAL COVER FROM A SLIDE CONVEYOR THAT WAS FIXED BY SILICON. EE WAS PRYING OFF COVER W/HAMMER & SCREWDRIVER. HE WAS STRUCK ON T OP OF THE NOSE W/COVER WHEN IT WAS PRIED LOOSE. EE NEEDED 5 STITCHES BUT DID NOT HAVE ANY LOST WORK DAYS OR RESTRICTED DAYS AS A RESULT OF INJURY.

EE WAS UNLOADING A RAILCAR AT THE PLANT, HAMMERING ON A HOPPER TO IMPROVE PRODUCT FLOW. HE HEARDA SOUND CHANGE IN THE CAR'S AIRLINE THAT INDICATED LESS AIRFLOW AND HIGHER PRESSURE. AT THAT INS TANCE THE AIRLINE CONNECTOR SUPPLYING UNLOADING AIR BLEW OFF THE CAR & HIT HIS ARM. ONE OF THE 2METAL STRAPS THAT TIE THE HOSE TO THE CONNECTOR HAD 9" OF LOOSE EXCESS.

EMPLOYEE WAS LOADING CLINKER INTO FEED HOPPER AND BREAKING UP LUMPS WITH MALLET WHEN A PIECE OF CLINKER FLEW UP TO HIS EYES AND CHATTERED THE RIGHT SAFETY LENS IN HIS GLASSES.

EE WAS PACKING MATERIAL WHEN PACKING SPOUT TURNED AND CAUGHT HIS RIGHT HAND IN BETWEEN THE PACKING SPOUT AND THE BAG CAUSING LACERATION AND CONTUSION.

EE WAS STANDING ON THE 4TH STEP OF A LADDER, ABOUT TO HAND A HAMMER TO A COWORKER INSIDE THE FONDU MILL WHEN HE SLIPPED & FELL OFF THE LADDER

A MECHANIC OTHER WAS WORKING ON THE CLINKER CRUSHER AND TURNING THE CRUSHER. EE REACHED UP TO HELP HIM AND GRABBED THE BELT AND STARTED PULLING EE S HAND GOT CAUGHT BETWEEN THE BELT, SHEAVE AN D THE GUARD. THREE FINGERS WERE CRUSHED ON HIS RIGHT HAND.

EE WAS USING A JACKHAMMER TO BREAK UP LUMPS OF MATERIAL WHEN A LUMP GAVE WAY, CAUSING THE JACKHAMMER TO SHIFT ANDF HIT THE 4EE'S RIGHT INDEX FINGER, BADLY BRUISING THE FINGER.

EE WAS UNLOADING LIME TRUCK. LINE BECAME CLOGGED AND HIGH PRESURE AIR HOSE WAS USED TO TRY TO FREE LINE. AIR WAS TURNED OFF. WHEN CHECKING TO SEE IF LINE WAS CLEAR, AIR HOSE FLEW OFF OF LINE, AND STRUCK EE IN THE ARM AND BLEW LIME INTO THE WOUND.

EE WAS CHANGING A LIGHT FIXTURE IN THE DISTR. BUILDING. INSTEAD OF LOCKING OUT THE POWER SOURCE, HE TAPED THE LIVE WIRES W/ELECTRICAL TAPE, AND WAS PASSING THEM INTO A 90 DEG. CONNECTOR, WHEN THE TAPE SPLIT. EE WAS NOT WEARING GLOVES,AND ENDED UP HOLDING THE LIVE WIRE. WITNESS REMOVED EE FROM POWER SOURCE. EE WAS UNCONSCIOUS FOR A FEW SECONDS, BUT WAS ALRIGHT AFTER. HE WAS TAKEN TO

EE WAS TAPING A 3/4" PIPE IN MILL DISCHARGE JOURNAL. HE PULLED HARD ON THE 12" LONG WRENCH HE WAS USING AND FELT A SHARP PAIN IN HIS STOMACH. EE WAS DIAGNOSED WITH UMBILICAL HERNIA AND REFERRE D FOR SURGERY, RESULTING IN RESTRICTED DUTY.

EE WAS DRIVING FORKLIFT AND STEPPED OFF ONTO A SMALL PILE OF MILL BALLS. EE REQUESTED TO GO TO CLINIC ON 12-4-97 BECAUSE HIS ANKLE WAS HURTING. DR PLACED EE ON RESTRICTED DUTY.

EE WAS TIGHTENING BURNER TIPS AND STRAINED VERY HARD. HE FELT LIKE HE HAD PULLED A MUSCLE IN HISRIGHT GROIN AREA. EE REQUESTED TO GO TO DR ON 121/97 INITALLY, DR DIAGNOSED A SMALL RIGHT INGUIN AL HERNIA AND PLACED EE ON RESTRICTED DUTY PENDIING REFERRAL TO A SURGEON. SURGEON WAS SEEN 12/397 AND DIANOSED INGUINAL STRAIN. EE WAS RELEASED TO RESTRICTED DUTY.

EMPLOYEE WAS DRIVING #6 FORKLIFT ON EAST FONDU CLINKER PAD WHLE TRANSPORTING S-71 CLINKER. THE FORKLIFT ENTERED A DEPRESSION IN ROADWAY, JARRING HIS BCK AND SENDING A SHARP PAIN UP HIS BACK. P RESCRIPTION DRUGS AND LIGHT DUTY PRESCRIBED.

EE WAS ATTEMPTING TO TRIP A CIRCUIT BREAKER. THEBREAKER WOULD NOT TRIP. THE EE PROCEEDED TO OPENTHE DOOR ABOUT 2/3 OPEN. HE WAS OBSERVING THE TRIP MECHANISM AND EITHER PUSHED THE TRIP BUTTON A GAIN OR TURNED THE HANDLE (EXTERNAL) WHEN HE HEARD A BUZZING AND OBSERVED AN ORANGE GLOW. THE NEXT THING HE REMEMGBER WAS CRAWLING AWAY FROM THEBOX. HE SUSTAINED 2ND DEG BURNS TO HAND AND KNE

EMPLOYEE LIFTING A NEW MOTOR FROM OX AND CUT HIS LEFT MIDDLE FINGER ON THE MOTOR KEY SHAFT.

EE WAS WAXING SLIDE THAT MOVES CEMENT BAGS FROM PACKING MACHINE TO CONVEYOR BELT & SLICED THE TIP OF RIGHT THUMB ON A SHARP EDGE.

EE WAS WALKING UNDER THE PLATFORM OF THE 71 SILO WHEN HE HIT HIS HEAD ON A BEAM AND JAMMED HIS NECK. EE ELECTED NOT TO SEEK MEDICAL TREATMENT AT THAT TIME, HOWEVER HE REQUIRESTED TO SEE DR. ON 10-16-97 BECAUSE NECK WAS STILL SORE. EE WAS DIAGNOSED WITH CERVICAL STRAIN. PRESCRIBED LODINE, SKELUSUN, AND VICODIN AND PLACED ON RESTRICTED DUTY.

A BEARING HOUSING FELL OF OF A MOTOR BASE. THE EMPLOPYEE CAUGHT IT AND PICKED IT UP TO PUT IT BACK ON THE MOTOR BASE. IN DOING SO, HE CUT HIS LEFT INDEX FINGER, REQUIRING TWO STITCHES.

EE BENT OVER TO CONNECT TWO PIECES OF 1" CONDUIT & FELT PAIN IN LOWER BACK. EE DID NOT REQUEST TO GO TO DOCTOR UNTIL 2/7/97.

EE WAS CHIPPING AT THE BOTTOM OF THE CLINKER TANK WITH A CHIPPING GUN TO CLEAR MATERIAL AWAY. LARGE PIECE OF CLINKER BUILDUP FELL ON EE'S ARM.

EE WAS WALKING BY FONDU MILL WEIGH FEEDER AND LOST HIS FOOTING ON A PILE OF CLINKER THAT WAS ON THE FLOOR. HE TRIED TO CATCH HIS BALANCE AND HIT HIS ELBOW ON THE WEIGH FEEDER, RESULTING IN CON TUSION TO RIGHT ELBOW.

EE WAS WALKING UP THE STAIRS IN THE LABORATORY BUILDING. HE SLIPPED ON A LOOSE FLOOR TILE AT THE TOP OF THE STAIRS & FELL BACKWARDS DOWN THE STAIRS TO THE 180 DEGREE TURN IN THE STAIRWAY. HIS LEFT HAND WAS ON TOP OF THE BALASTER AT THE TOP OF THE STAIRS & THE TOP CAP OF THE BALASTER PULLER LOOSE IN HIS HAND AS HE FELL.

EE WAS CLEARING CLINKER FROM HOPPER GRATE WHEN THE LOAD BROKE THROUGH AND TRAPPED HIS RT FOOT AND LEG, RESULTING IN SEVERE BRUISING AND CUTS AND SCRAPES TO FOOT AND LEG.

EE WAS CARRYING 5-GALLON BUCKETS FULL OF BROKEN UP CONCRETE TO THE END OF THE COOLER AND STEPPEDON A REFRACTORY ANCHOR.

EE REQUESTED MEDICAL ATTENTION FOR SWOLLEN ARM ON 10/18/96 IN THE AFTERNOON. AT THAT TIME, HE INFORMED SUPERVISOR THAT PARTICLES FROM A GRIND WHEEL HAD STUCK IN HIS LEFT ARM WHILE GRINDING S TEEL ON 10/02/96.

EMPLOYEE GOT OFF OF A FORKLIFT TO MOVE A PIECE OF WOOD AND SLIPPED ON ICE.

EMPLOYEE WAS CLEANING A TARP THAT WAS COVERING A CLINKER PILE AND INJURED HIMSELF WHILE CUTTING A TIRE OFF OF A ROPE THAT WAS ON THE PILE.

EMPLOYEE WAS WALKING DOWNA CLINKER PILE (ABOUT 10FEET FROM THE GROUND) WHEN HE LOST HIS FOOTING BECAUSE OF SHIFTING CLINKER. HE FELL AND INJURED HIS RIGHT SHOULDER.