Buscar en el registro

While installing the mounting flange to the wash plant waste pump, the flange fell off the housing seat approximately 2" smashing his left thumb between the flange and shaft of the pump. His thumb required some stitches but no broken bones.

While closing a sliding window in the crusher shack, the window came off track. EE pushed on the window to put it back on track and the window glass broke cutting his right hand.

While removing cutting edge bolts from a cat 988H loader, EE used his hand to push up a volt to lock it into place. At the same time he hit the trigger of the impact wrench with his other hand causing the bolt to spin in his hand. The worn bolt head cut his thumb through his leather glove. He was wearing all requited PPE and the loader was locked out and tagged.

While changing flashing on a conveyor using a hammer and punch for bolt holes. EE hit his left hand with the hammer.

Jaw crusher was plugged while cleaning rocks out strained his lower back. EE did not report pain in his back unitl 8/21/08.

While changing bucket teeth on loader, tooth fragment broke loose and went into left thigh.

Helping change crusher liner holding onto tag line and stepped between crusher and catwalk area. **Employee reported to plant manager and they determined no injury. On 7/17/07 the employee's elbow was swollen & he was sent to the clinic and fluid was removed.**

Jumped off of conveyor - inguinal hernia on right side.

Cutting belt holes in belting, knife slipped and cut left thigh.

While working on chute liner employee holding steel plate lost his grip and plate landed on employee's foot, leaving a sliver of steel in his foot.

Quality control employee emptying sieve screens and a small particle of rock or dust bounced into his eye under his safety glasses.

Employee was stepping down from truck onto the ground. He lost footing and landed awkward onto the ground injuring his ankle.

WHILE CLIMBING DOWN BACK OF LOADER HIS FOOT CAUGHT ON STEP, CAUSING HIM TO PUSH UP WITH HIS OPPOSITE LEG STRAINING HIS ABDOMEN WALL.

AFTER INSPECTING WASH PLANT SPRAY BARS, EE LOST HIS FOOTING AND CAUGHT HIMSELF WITH HIS LEFT HAND. THIS CAUSED SHOULDER AND UPPER ARM STRAIN.

WORN SEAT ON FRONT END LOADER

Loader seat suspension caused upper back strain.

CHANGING SCREENS ON PRIMARY SCREEN, WHEN EE FELLOFF OF TOP OF SCREEN AND LANDED ON WALKWAY ON HIS BACK.

REMOVING DEAD BED FROM UNDER JAW BELT, THUMB WAS PINCHED BETWEEN DEAD BED AND JAW FRAME.

CLOSING UPPER WINDOW ON RENTED CRANE, WHEN THE WINDOW SLIPPED & SLAMMED SHUT ON RIGHT THUMB. RT HAND 3RD FINGER CRUSHED & LACERATED.

WHILE CUTTING THE DRAGE CABLE ON THE DRAGLINE WITH AN OXY/ACET TORCH, SOME MOLTEN SLAG SPRANG UP FORM THE CABLE WHEN CUT AND WENT DOWN HIS GLOVE - BURNING HIS HAND.

EE WAS CLEANING GRIZZLY ON JAW FEEDER WITH A 8 LB HAMMER. THE HAMMER CAME IN CONTACT WITH THE UPPER BEAM SUPPORT AND STRUCK EE ON LEFT SIDE OF HIS HEAD.

WHILE CLEANING JAW CRUSHER GRATE, A ROCK CAME LOOSE AND FELL ON THE RIGHT HAND CAUSING 3RD FINGER TO BE HIT. THE EE NEEDED 4 STITCHES.

WHILE EXITING WATER TRUCK DRIVER HIT THE DRIVER'S SIDE DOOR HANDLE. THE HANDLE BROKE AND THE DRIVER CUT THE INSIDE OF HIS HAND.

WHILE REMOVING A PIECE OF OVERBURDEN FROM A JAW CRUSHER, THE OVERBURDEN BROKE AND A PIECE SMASH ED THE FINGER OF THE EE.

WHILE HELPING INSTALL ROLLERS IN A SCREEN THE ROLLER SLIPPED OUT OF ITS KEEPER. THE EMPLOYEE REACHED TO CATCH IT AND STRAINED THE MUSCLES IN HIS BACK.

WHILE REPLACING BELT AND TAIL PULLEY ON MP02 CONVEYOR. THE EE WAS HELPING LEFT THE TAIL PULLEY INTO PLACE WHEN THE TAIL PULLEY SLIPPED AND CAUGHT HIS HAND PUSHING IT AGAINST THE FRAME.

WHILE TIGHTENING DRILL BIT WITH SCREW DRIVERS RIGHT HAND SLIPPED AND CUT LITTLE FINGER ON DRILL BIT. REQUIRED C9 STITCHES TO CHOSE WOUND.

WHILE REMOVING A RIPPER TOOTH FROM A DOZER EE HIT TOP OF TOOTH WITH A HAMMER CAUSING A PIECE OF METAL TO CHIP & ENTER THE THIGHT OF THE RIGHT LEG

WHILE CLENAING RAP DRIVE BREAK OVER PULLEY WITH SCRAPER BAR, BAR GOT CAUGHT RIGHT HAND TO BE PULLED INWARD.

WHILE LOWERING TORCH TO GROUND FROM SCREEN CATWALK AREA SLIPPED AND FELL ON TO HAND RAIL. THE HAND RAIL BROKE AND EE FELL ON TO TAIL PULLY GUARD. FROM THERE FELL ONTO GROUND.

WHILE POURING CONCRETE EE WALKED IN WET CONCRETE WITHOUT PROPER SAFETY EQUIPMENT. CAUSING CHEMCIAL BURNS ON LEGS.

WHEN STEPPING OFF LADDER ONTO GROUND EMP TURNED TOO SOON AND TWISTED LOWER BACK.

AFTER CONE CRUSHER ADJUSTMENT WAS COMPLETED THE MACHINERY WAS PUT INTO A SINGLE PHASE STARTUP. EQUIP WAS THEN TURNED OFF, ELECTRICAL PANEL WAS OPENED ON BACKSIDE WITH DISCONNECT STILL ENERGIZE D. KNIFE EDGE ON DISCONNECT WAS PUSHED IN WITH A SLEDGE HAMMER. THE HAMMER TOUCHED TWO PHASES OF 480 VOLTS TOGETHER RESULTING IN FLAMES TOWARD EE. ELECT. PANEL WAS DESTROYED.

DOING MAINTENANCE ON L-JAY CRUSHER SWINGING SLEDGE HAMMER AND HIT FINGER BETWEEN WALL & HAMMER HANDLE.

FRONT END LOADER RAN OUT OF FUEL. LOADER LOST POWER TO ALL CONTROLS. ROLLED BACKWARDS AND OFF A 30 TO 40 FT. EMBANKMENT.

39977ED WHILE PATCHING SCREEN L ELBOW RELEIVED ON E INCH LACERATION FROM THE EDGE OF SCREEN WIRE

TREES GRASS & TRASH WERE IGNITED WITH GASOLINE IN A CULVERT

WHILE CLEANING A FAN FEEDER WITH HAND PICK.

DRIVER SLIPPED ON BERM OF BANK AND FELL 25'TO OPEN PIT AREA.RESULTED IN VARIOUS PUNCTURE WOUNDS TO HEAD,ARMS AND POSSIBLE NECK & BACK SPRAIN.

WAS USING PRY BAR TO CLEAN DIRT AROUND TAIL PULLEY ON CONVEYOR.BAR GOT CAUGHT IN TAIL PULLEY AND PINCHED FINGER AT CONVEYOR FRAME.

WHILE INSTALLING WEDGES IN CRUSHER CONE HIT LEFT ARM ON BRACE.

CRANE CHAIN UNHOOKED.

BACK WAS HURTING.

FOOT SLIPPED ON DOZER TRACK FELL ON PUSH ARM OF DOZER AIR WRNECH ON GROUND.

HOLDING STEEL FOR WELDER OP

CUTTING STEEL- BEAM FELL- RIGHT FOOT.

OTHER EMPLOYEE 4AS WORKING ON THE SCREEN I,NAME WAS ON THE GROUND, OTHER EMPLOYEE ASKED I,NAME TO GET HIM A BAR, HE CLIMBED ONTO THE CONVEYOR (RETURN) TO GIVE HIM THE BAR HE SLIPPED OR LOST HI S BALANCE, FALL3TO THE GROUND (APPROX. 4.5 FT). THE PLANT WAS DOWN AT TIME ACCIDENT.

TURNING U-BELT 6Y HAND TO CLEAR TAILPULLEY WHEN A ROCK WENT PAST CENTER BELT ROLL ABOUT 4" PINCHING FINGER.

REPLACING JAW P5ATE, HE WAS HOLDING IT IN PLACE WITH FOOT, PLATE SHIFTED BACK BENDING FOOT BACK.

LOST FOOTING WH3LE DIGGING OUT HOPPER.FELL AND HIT LEFT KNEE ON STEEL RAIL.