Buscar en el registro

Crusher jaw got jammed - we de-energized, performed all log out/tag out procedures and started removing jammed rocks. Employee, while removing rocks, smashed finger when EE hit the side while holding the rock, causing laceration that required stitches.

While walking, he stepped on a rock and rolled his ankle

Did not happen on mine property

HE HIT HIS HAND ON THE SIDE OF HIS WATER TRUCK. IT BROKE A BLOOD VESSEL.

WHILE DOING MAINTENANCE ON THE CRUSHER, HE HAD A WELDING HELMET ON WITH LEATHER SIDES. HE LIFTED THE HELMET ONTO HIS HEAD. HE WALKED TO A DIFFERENT AREA AND WALKED INTO A TOOL BOX.

WHILE USING CUTTING TORCH FOR MAINTENANCE, EE GRAZED HIS ARM WITH IT - BURNED HIS ARM.

WHILE DOING MAINTENANCE ON A CRUSHER, A PIECE OF METAL HIT HIS ARM.

WHILE SHOVELING DIRT FROM UNDER CRUSHER, HE TWISTED AND PULLED A MUSCLE IN HIS BACK.

WHILE PULLING ON DRIVE BELT, FINGER WENT BETWEEN THE BELT AND THE PULLEY, COMPRESSING IT.

WHILE BACKING UP IN DOZER, HE HIT A ROCK, JARRING HIS UPPER BACK.

WHILE CHANGING SCREENS, HIS HAND GOT SMASHED.

EE WAS UNDER THE TRUCK ATTACHING CHAINS TO THE TRUCK WHICH IN TURN WOULD BE ATTACHED TO THE LOADER BUCKET. LOADER TRAVELING DOWN INCLINE WOULD NOT BE ABLE TO STOP. EE TRIED TO GET OUT FROM UN DER THE TRUCK BUT WAS UNABLE TO IN TIME. TRUCK PUSHED THE TRUCK WITH EE UNDERNEATH FOR APPROX 12'.

SAME AS ADJACENT ACCIDENT WITH COWORKER.

HE WAS WELDING ON THE CRUSHER, HE DID HAVE A WELDING HELMET ON BUT THE ARES MUST HAVE GONE UNDER THE HELMET AND BURNED HIS EYE.

THEY WERE CHANGING SCREENS ON THE CRUSHER. HE DROPPED THE SCREEN AND IT FELL ON HIS FINGER.

EE WAS WALKING TOWARDS A BELT TO SHUT TO MOTOR OFF. EE STEPPED ON A ROCK AND SPRAINED HIS ANKLE.

STARTING FLUID IGNITED AND 2ND DEGREE BURNS FACE.

HE WAS SLIDING A BELT AND GOT HIS FINGER CAUGHT BETWEEN A HAMMER AND A PIECE OF ANGLE IRON.

HE WAS CLEANING OUT THE GEAR BOX AND CUT HIS RIGHT INDEX FINGER.

HE WAS CHANGING A BEARING ON A ROLLER. THE ROLLER SLIPPED AND FELL ON HIS RIGHT FOOT.

INJURED WAS DOING NORMAL REPAIR WORK AT THE PIT.HE WENT TO HIS TRUCK- OTHER EMPLOYEES FOUND HIM LYING ON THE GROUND BY HIS TRUCK. HE HAD AN HEART ATTACK.

HE WAS DRIVING UNDER POWER LINES AND WAS ELECTRUCTED. HE STATED THAT HE HAD DRIVIN UNDER TH ESAM ELINES NUMEROUS TIME SBEFORE HIS SUPPOSITION IS THAT THE WIIND MUST HAVE BLOWN THE LINES DOW N FAR ENOUGH TO TOUCH HIS EQUIPMENT.

HE WAS LYING ON HIS BACK PUTING A SCREEN INTO PLACE. WHEN HE LIFTED THE SCREEN SOMETHING IN HIS SHOULDER POPPED. THE DOCTOR BELIEVES IT COULD BE A TORN ROTATOR CUP.

HE WAS PULLING ROCKS OUT OF THE JAW THAT DAY. SOMETIME THAT DAY HE PULELD HIS LOWER BACK. HE FINISHED THAT DAY OF WORK AND THE NEXT DAY.

HE WAS CLEANING THE CONE OF ROCKS, USING A BAR. THE BAR SLIPPED AND SMASHED HIS HAND AGAINST THE SIDE.

HE WAS PULLING A RESTRICTOR PLATE OUT OF THE CONE TO CLEAN IT. THE PULLING ACTION POPPED 2 VERT EBRATES OUT IN HIS LOWER BACK.

HE WAS PATCHING A HOLE ON A CONVEYOR BELT BELT WAS TURNED ON & IT FLIPPED HIM OFF & ONTO THE GROUND IT BRUISED HIS SHOULDER & KNEE

EMPLOYEE WAS PATCHING A HOLE ON A CONVEYOR BELT. THE BELT GOT TURNED ON AND IT FLIPPED HIM OFF OF BELT AND ONTO THE GROUND. IT BRUISED HIS RIBS.

HE WAS SLICING A BELT ON THE CRUSHER WHEN HE WAS PULLING IT TOGETHER HE TWISTED AND HURT HIS BACK.

HE WAS SHOVELING BUILD UP OUT FROM UNDERNEATH THE CONVEYOR BELT, HE SWUNG TOO FAR AND HIT HIS HAND INTO THE BELT. THE BELT DISLOCATED HIS RIGHT MIDDLE KNUCKLE.

FROM RUNNING A LOADER A DISC IN HIS LOWER BACK COMES OUT IT IS A LUMBAR SPRAIN AND FACET ACUTE EXACESBATION OF CHRONIC SYNDROME.

HE WAS LINING UP THE HOPPER, HE WENT FOR MORE BOLTS AND SLIPPED AND FELL HITTING HIS RIGHT BACKSIDE RIBS AGAINST THE FRAME OF THE CRUSHER.