Buscar en el registro

The plant operator was using a 3/4" air impact gun to tighten bolts on the swing dye of the jaw crusher when the impact gun bounced back and pinched the operator's hand between the tool and the wall of the crusher.

The repair crew was replacing main frame liners in Sandvik cone crusher when Miner reached down to apply upward pressure on a liner which had already been tacked in. EE felt a pop and experienced pain in EE's arm.

Operator was mucking mud with excavator (Cat 365) when a hydraulic cylinder next to the cab burst. The window was shattered, and the operator was sprayed with hydraulic oil. Operator went to the hospital where EE was given a return to work without limits. EE chose to take the week off work. No injury, near miss only.

Mechanic was descending a two rung step ladder with a part in EE's hands. EE reached the floor and stepped on a part which was on the ground and rolled EE's ankle.

EE was operating an articulating haul truck when EE hit a bump and EE's back began to hurt. EE clocked out and went to EE's personal urgent care facility. EE reported EE's injury to the company July 23, 2024.

Loading/unloading boxes, bent over to pick up a box, pain in back.

Miner walked out of parts bin and slipped on wet concrete pad. Miner experienced pain in hamstring area several days after the fall. Miner did not report injury to a supervisor until 3/8/23.

Miner was removing old pipe to be discarded and was bitten by a snake on the right hand.

Mechanic was installing a lift cylinder on CAT 988F when the nylon sling EE was using broke and the cylinder dropped onto the mechanic's leg.

Loader operator shook the bucket to confirm no residual material was in EE's bucket. The machine shaking aggravated an existing back condition. The operator finished the shift and departed the mine site without notifying the supervisor of EE's injury.

Employee was in proximity of another employee welding when a piece of hot metal landed on shirt burning the employee's arm.

Plant operator was working at a conveyor transfer point when the operator stood up from a kneeling position, knee was lacerated by a piece of steel.

Mechanic was working on an excavator when the impact gun EE was using suddenly moved and slammed EE's finger into part of the machine.

Plant operator was descending a fixed ladder. Operator assumed they had reached the last ladder rung when they were in fact another step from the bottom. The operator jumped from the ladder and twisted their back.

Cat 775G Haul truck #3-74 dumped material into hopper and began to move away from dumping chute when fire started in engine compartment. Operator immediately exited machine without injury and fire was extinguished by nearby water truck.

Employee was lying on left side and felt pain in their ribs. Dr. advised lt duty for 1 week.

Equipment greaser was greasing haul truck when ee attempted to align the grease hose from the grease gun into the grease receptacle. Grease was injected into skin when ee activated the grease gun.

Employee injured finger tip while installing pin in bumper of truck.

Operator received burns to left hand as a result of a fire near the cab of the Caterpillar 770 water truck.

Employee got hydraulic oil in eye while conducting a pre-shift inspection. Eye did not bother the employee initially, but became irritated a few days later.

Employee was helping a co-worker position a small metal plate, which slipped and cut right pinky finger.

Employee experienced a strain of the lower back while exiting skid-steer tractor.

Employee experienced neck pain while operating haul truck.

Employee dropped a metal bar on his right foot.

Employee received a burn to his left forearm when energizing a circuit.

Employees claims he pulled a muscle in a his back while shoveling.

Employee became bored driving a pit truck.

Employee had a seizure while on the clock operating a haul truck. We don't think this is chargeable, but wanted to report it to be on the safe side, just in case. Employee later failed drug test, and was terminated.

Employee was assisting in an oil change. He spilled some oil, then slipped in the oil, falling backwards and catching himself with his right wrist. Wrist is thought to be sprained at this point, but not known for sure.

EMPLOYEES HAD SHUT PLANT OFF, PREPARED FOR THE WEEKEND, AND WERE THROWING A FOOTBALL AROUND. EMPLOYEE FELL BACKWARDS REACHING FOR THE BALL, HITTING HIS HEAD ON THE GROUND. HE WAS TAKEN TO INLAND VALLEY AND LATER TRANSFERRED TO LOMA LINDA HOSPITAL. HE PASSED AWAY AT LOMA LINDA HOSPITAL AT 1:05 PM 12/31/05.

Employee was carrying a strip of plastic, slipped in a muddy spot on decking, and fell to one knee. Employee's left knee hit the ground. Employee has not missed any work, but has now been referred to orthopedic specialist for further evaluation.

EE WAS MOVING SHIMS, CUT FINGER ON A SHARP EDGE.

THE ROD IN FORD PICKUP BROK, DISABLING STEERING. TRUCK STRUCK BLOCK WALL. EE'S LEFT LEG HIT AN ATTACHMENT ON THE DASH, CAUSING A CUT.

EE WAS HAMMERING A PIECE OF METAL, A CHIP FLEW INTO HIS HAND, EMBEDDING.

EE WAS WALKING, TRIPPED & FELL, CUTTING ARM NEAR ELBOW.

EMP WAS PICKING ROCK OUT OF CRUSHER WHEN CRANE TIPPED. EMP JUMPED OUT OF CRANE, STRIKING PELVIC AREA.

EE SLIPPED WHILE MOVING SCREENS, WT LEG.

DRIVING CRANE ON INCLINED ROAD, MOTOR STALLED, BRAKES HAD NO POWER WITHOUT ENGINE, CRANE BEGAN MOVING BACKWARDS. OPERATOR EXITED VEHICLE, STRIKING KNEE ON THE GROUND.

OEPRATOR BACKED WATER TRUCK INTO BERM, CAUSING CENTER OF GRAVITY TO SHIFT & TRUCK TO ROLL OVER, CAUSING LOWER BACK STRAIN.

EMPLOYEE FELL, INJURING RIGHT WRIST.

REMOVED V-BELT GUARD TO CHECK TENSION, MOTOR STARTED, TAKING HAND INTO SHEAVE AND CUTTING FINGERS. OTHER EE THOUGHT EE HAD SIGNALED TO START BELT.