Buscar en el registro

EE WAS TIED OFF TO LANYARD CABLE AS HE LOADED A RAILCAR. RAILCAR WAS MOVED AND EE WAS PULLED OFF CAR BY HIS HARNESS. WHILE ATTEMPTING TO RELEASE HIS LANYARD CABLE HIS LEFT THUMB WAS CAUGHT UND ER THE HOOK AGAINST THE CABLE TEARING SKIN ON HIS THUMB.

EE WENT TO THE BACK OF UF PLANT TO CLEAN-UP RUN OVER OF 1 MICRON PRODUCT. WENT TO GET WATER HOSE OFF OF #8 SG FROM STAIRS BEHIND #6 SG. WHEN STEPPED DOWN OFF OF STAIRS TO FLOOR HIS RIGHT FOOT SLIPPED OUT CAUSING HIM TO FALL. HE CAUGHT HIMSEF WITH HIS RIGHT ARM CAUSING ALL OF HIS WEIGHT TO START THE PAIN.

INJ WAS STANDING TO THE SIDE OF THE RAISED FORKLIFT BLADES TO ADJUST BLADE WIDTH. WHILE LIFTING & PULLING BLADES TOWARD HIM HE FELT A SHARP PAININ HIS UPPER RIGHT CHEST AREA

EMPLOYEE WAS ATTEMPTING TO REMOVE A SLIDE GATE FAN #4 MILL RETURN SCREW. SINCE THE GATE WAS OVERHEAD, HE WAS USING A PIPE TO SLIDE THE GATE BACK. THE GATE GOT STUCK. EMPLOYEE REMOVED THE PIPE AND THE GATE RELEASED UNEXPECTEDLY. IT THEN SLIDDOWN THE PIPE, STRIKING THE BACK OF EMPLOYEE'S LEFT HAND, CAUSING LACERATIONS.

EMPLOYEE WAS USING A HAND SCALING CHIPPING HAMMER TO REMOVE ROCK FROM THE CEILING OF THE UNDERGROUND MINE. HE LOST CONTROL OF THE CHIPPING HAMMER, CAUSING A SPRAIN TO HIS RIGHT WRIST.

EMPLOYEE SLIPPED AND FELL TO FLOOR IN THE WASTE WATER TREATMENT PLANT, HITTING HIS RIGHT KNEE. HE WAS STANDING ON THE CATWALK AT THE #1 DRUM FILTER TO CHANGE THE VALVES BETWEEN #1 AND #2 FILTE RS. HE STEPPED OFF THE CATWALK, HITTING HIS RIGHT KNEE ON THE AGITATOR MOTOR FOR THE #1 FILTER.

EMPLOYEE WAS CLEANING OUT THE BOTTOM TAIL SECTION OF THE #3TRANSFER ELEVATOR. THE ELEVATOR WAS FULL OF MATERIAL. WHILE CLEANING THE ELEVATOR WITH HIS HAND, ELEVATOR BROKE FREE AND TURNED BACKW ARDS, CUTTING EMPLOYEE'S RIGHT HAND.

EMPLOYEE WAS UNLOADING BACK OF TRUCK. EMPLOYEE WAS BACKING UP AND TRIPPED OVER PIPE.

WHILE HOLDING A THIN BLADE ROTARY CUT OFF GRINDER, THE WHEEL CUT EMPLOYEE'S ARM.

WHILE WORKING ON A GEAR BOX IN THE SHOP, MINER STEPPED OFF BOX, APPROXIMATELY 10" DOWN AND TURNED HIS RIGHT ANKLE. INITIALLY, NO REPORTOR MEDICAL TREATMENT. EMPLOYEE LATER DECIDED TO GO TO THE DOCTOR. REPORTED LATE BY EMPLOYEE.

ASSISTING LIFT OPERATOR MOVE AND ADJUST FORKS ON LIFT TRUCK TO MOVE PALLET OF MATERIAL. HE RAISED CLAMP, AND WHEN HE SLID FORKS INWOARD, HE PINCHED FINGERTIP BETWEEN LIFT TRUCK MAST AND BACK O F FORK BLADES. GOUGED FLES & BROKE BONE IN FINGERTIP.

MILLWRIGHT STEPPED BACKWARDS OFF PORTABLE STAIRS, FELL BACKWARD OFF BOTTOM STEP TWISTING ANKLE. STEPS ON CONCRETE FLOOR SITTING UNEVEN DUE TO SLIGHT BUILDUP OF POWDER. PLACED ON LIGHT DUTY BY LOCAL DR.

CLEANING--WASHING TOP OF PRODUCT STORAGE TANK WITH WATER, FOOT SLIPPED, LOST BALANCE, WHILE BREAKING FALL, RIB CAGE HIT HAND RAIL. COWORKER ALSO CAUGHT ARM TO BREAK FALL.

THE OPERATOR STEPPED OUT OF THE OPERATOR SHACK TO THE FLOOR AREA. THE METAL PLATE THAT COVERS THE TRENCH/DITCH HAD BEEN MOVED EXPOSING THE DITCH. THE GRATE COVERING THE DITCH HAD BEEN PRESSE D INWARD CAUSING A DEPRESSION UNEVEN WALKING SURFACE. THE OPERATOR STEPPED ON THE GRATE CAUSING HIM TO TWIST HIS LEFT ANKLE CAUSE A SPRAIN

EE BEGAN WORKING AT 0700. HE WAS OPERATING A FORKLIST. AFTER COMPLETING TASK (DUMPING HOPPER), HE EXPERIENCED SLIGHT PAIN IN HIS LOWER BACK.(WHILE GETTING ON AND OFF TOW MOTOR). HE THEN WENT T O THE THIRD LEVEL OF THE FACILITY TO WORK ON THE DRY PULSE-ATR DUST COLLECTOR. HE BENT OVER TO PICK UP TOOLS, PAIN WAS UNBEARABLE. FOUR YEARS AGO EE WAS IN A CAR ACCIDENT INJURING SAME AREA.

EE WAS SEATED IN OPERATORS POSITION WHEN BAG CHAIR/SADDLE DROPPED LOOSE. HE LEANED FORWARD AND DOWN TO REACT & PLACE BACK IN SLOT. HIS HEADHIT START FILL BUTTON ACTIVITATING PNEUMATIC CYL INDOR CAUSING IT TO PINCH THUMB

EE ORIGINALLY REPORTED HE INJURED SHOULDER AT CO. SOFTBALL GAME. A MONTH LATER HE REPORTED HE AGGRAVATED IT ON THE JOB. AFTER WORKER'S COMP. INVESTIGATION CARRIER DECIDED IT WAS COMP. EE NOW S AYS REACHED UP IN TUNNEL AND REINJURED SHOULDER INJURY FROM SOFTBALL.

EMPLOYEE WAS CLEANING OUT THE FEED SCREW. SCREW WAS LOCKED OUT. HE ATTEMPTED TO REPOSITION HIMSELF FOR BETTER ACCESS AND LOST HIS BALANCE DUE TO AN UNEVEN WORKING SURFACE. HE GRABBED THE SCREW TO REGAIN HIS BALANCE CAUSING A LACERATION TO HIS RIGHT HAND (THE PINKY FINGER) EMPLOYEE WAS WEARING GLOVES AT THE TIME OF THE INCIDENT. EMPLOYEE SCHEDULED VACTION BEGAN ON 29 JUNE 98 RETURNE

EMPLOYEE LOST TEMPER, SLAMMED DOOR OF TRUCK, USING MIRROR TO SLAM DOOR AND HAND WENT THROUGH MIRROR CUTTING RIGHT HAND. SELF-INFLICTED DURING FIT OF RAGE. COMPLICATED INVESTIGATION.

MINER WAS PLACING BAG CHAIR BACK ON BAGGER, ENGAGED HYDRAULIC SYSTEM ACCIDENTALLY WITH LEFT SHOULDER, CAUSING HYDRAULIC SYSTEM TO ACTIVATE, PINNING THUMB BETWEEN BAGGER, BAG CHAIR AND RAIL. RE QUIRED BUTTERFLY STITCHES. EE FAILED TO DISENGAGE SYSTEM & USE INSTALLED CUT-OFF.

EE DID NOT REPORT INCIDENT UNTIL 5-22-98 EE RECEIVED RESTRICTED DUTY FROM MEDICAL PROFESSIONAL. EE S KNEE CONTINED TO CAUSE HIM PAIN. THEREFORE, HE SOUGHT FURTHER MEDICAL ASSISTANCE EE HAD BEE N AWAY FROM WORK SINCE INJURY 98.INCIDENT OCCURRED WHILE WASHING SCURRY FROM UNDER AND 7 MILL. HE STEPPED ON BOARDWALK AND TWISTED HIS L KNEE.

INSPECTING PIECE OF EQUIPMENT, STEPPED UP ONUTILITY CART FOR BETTER REVIEW WHEN CART MOVED HE STARTED TO FALL & TRIED TO BRACE HIMSELF WITH HIS RIGHT ARM.

CLEANING GROUP HAD ARRIVED, SPRAYED FLOR WITH WAX REMOVER. EE WAS AWARE OF IT & WAS TIPTOEING OUT OF BUILDING TO GO HOME WHEN SHE SLIPPED & FELL HITTING HER CHIN ON FLOOR.

EE WAS STACKING BAGS WHEN ONE FELL, HE TRIED TO CATCH IT & HIT HIS FINGER ON THE CONVEYOR BELT.

EE WAS CLEANING ROCK OUT OF CRUSHER & RUBBED HIS EYE & GOT SAND & GRIT IN HIS EYE.

EE WAS GREASING #1 AIR SIFTER AT PLANT 1 TUBE MILL, SECOND FLOOR LANDING. HE STEPPED BACKWARDS & STEPPED ON A 3/4" RUBBER HOSE & LEFT FOOT/ANKLEROLLED OUTWARD & EE FELL TO THE FLOOR.

GPF-AFTER STACKING 4 OR 5 PALLETS, EMPLOYEE COMPLAINED OF PAIN IN LEFT SHOULDER TOOK FREQUENT REST BREAKS SENT TO DR LATER AND PLACED ON LIGHT DUTY.

EE WAS REMOVING GUARD FROM CLUTCH TUBE MILLE DRIVE SHAFT & HE MASHED HIS 4TH FINGER.

EE WAS PULLING COVER OFF SCREENER & HIS HAND GOT CAUGHT BETWEEN COVER & MACHINE.

EE WAS STACKING BAGS WHEN HE TURNED & FELT SHARP PAIN IN HIS LEG & ARM.

EE WAS WALKING ON TOP OF STEEL SILO, SLIPPED ON WET CARBONATE, FALLING ON RIGHT FOOT, BREAKING HIS RIGHT ANKLE. "SLIP & FALL"

GPF-EMPLOYEE REPORTED TO WORK AT 6:00 AM SHORTLY AFTER HE NOTICED A COUPLE OF RED KNOTS ON BODY, AS SHIFT WENT ON HE NOTICED MORE. HE BEGAN TO ITCH. BY END OF SHIFT TREATMENT BY DOCTOR WAS SOU GHT AND GIVEN.

THE MINER WAS HANGING A BULK BAG ON A MACHINE ARM. WHIEL STEPPING BACK HE STEPPED ON A LIFT ARM OF A FORKLIFT WHICH HAD BEEN PARKED. THIS RESULTED IN A SPRAIN AND HAIRLINE FRACTURE TO THE RIGH T ANGLE. (EMPLOYEE ENGAGED IN NORMAL DUTY)

MINER WAS STANDING IN SHIPPING OFFICE IN MILL AREA OPERATING COPY MACHINE. ARMS WERE FULL OF PAPERS TO COPY WHEN A PAPER SWIPED HER RIGHT EYE, CAUSING A SCRATCH OR LACERATAION OF EYE OR CORNEA . NORMAL DUTY.

EMPLOYEE WAS WALKING DOWN A SLIGHTLY GRADED RAMP 6% AND TWISTED HIS LEFT KNEE. EMPLOYEE REPORTED PREVIOUS PROBLEMS WITH KNEE. AREA WAS CLEAN, WELL LIT, EMPLOYEE WAS NOT CARRYING ANYTHING. AFTE R FULL WORKMAN'S COMP INVESTIGATION ACCIDENT DEEMED ON THE JOB.

GPF-OVER PERIOD OF TIME EMPLOYEE NOTICED LEFT KNEE PAIN WHEN POPPED AND SNAPPED ON JOB ON DATE ABOVE, WHEN WORKING ON PUMP

EMPLOYEE WAS ATTEMPTING TO OPEN THE 8 MIL DOOR, WHICH WAS JAMMED, WHEN THE DOOR HANDLE SNAPPED OFF STRIKING EMPLOYEE ON THE SURROUNDING AREAS- FACE, NECK AND HEAD/RIGHT TEMPLE.

2-27-97--SHOVELING DEVELOPED LOWER BACK PAIN. 2-28-97--STILL FELT LOWER BACK PAIN. 3-1-97--SLIPPED, DID NOT FALL, EXPERIENCED MORE BACK PAIN AND REPORTED TO SUPERVISOR.

EMP WAS USING AN AIR HOSE TO REMOVE BUILDUP OF DUST ON BELT ROLLERS WHEN HOSE BECAME CAUGHT BY CHAIN LINK BELT AND HIS RIGHT HAND WAS PULLED INTO PINCH POINT BETWEEN TWO OPERATING BELT CONVEYO RS. BELT WAS NOT STOPPED.

INSTALLING CLAMP ON 375 EXCAVATOR, FINGER WAS PINCHED BETWEEN WRENCH AND BUCKET CYCLINDER. AN IMPROPER WRENCH SIZE WAS USED TO TIGHTEN THE BOLT, CAUSING INJURED EE TO HOLD WRENCH ONTO BOLT HEA D.

SHOVELING LOOSE SAND, PREVIOUS DUG BY A BACKHOE.NO APPARENT REASON FOR INJURY.

EE WAS CHECKING REASON WHY PRODUCT WAS NOT FLOWING AT PROPER RATE. BEAT ON CHUTE WITH HAMMER. FEED DID NOT IMPROVE. USED WRENCH, UNSCREWED 1" PLUG OUT OF BODY OF FEEDER AND STUCK FINGER THRU H OLE INTO MOVING AIR LOCK CHAMBER WHERE ROTATING ASSEMBLY CAUGHT AND CUT OFF FINGER.

EMPLOYEE STATES SHE WAS CLEANING A BUCKET WHEN SHE CAME IN CONTACT WITH SOME CHEMICALS ON THE BOTTOM OF THEBUCKET CAUSING A RASH

EMPLOYEE STATES HE WAS LOADING A CAR WITH A BIOCIDE WHEN THE LINE BLEW A SMALL PIN HOLE SPRAYING THE EMPLOYEE'S RIGHT SHOUDER CAUSING A CHEMICAL BURN.

EE STATES HEHAD CLEANED STRAINERS AND PLACED BACK TOGETHER. HE HAD OPERATOR TO START UP PUMP & IT BLEW HOS APART SPRAYING CHEMICAL INTO MILLWRIGHT'S EYE. EE WA SNOT WEARING SAFETY GOGGLES DURI NG TIME OF TESTING.

EE STATES HE THOUGHT THIS INJURY WAS HIS KNEE AT JUST. HE HAD A HISTORY OF KNEE PROBLEMS. LATER TEST RESULT SAID HE HAD A CHIPPED DISC.

EE STATES HE WAS CLIMBING DOWN A SHOVEL WHEN HE CAUGHT HIS FINGER ON CATWALK REQUIRING STITCHES.

EMPLOYEE STATES HE SLIPPED WHIEL PUTTING AIR LINE BACK ON RAYMOND MILL FEED BIN.

EE STATES HE WAS CUTTING A 5 GALLON PALSTIC CONTAINER WHEN HIS BALDE BROKE ON THE RAZOR. SLIPPING AND CUTTING HIS LEFT THUMB . IT REQUIRED SOME STITCHES.

EMPLOYEE STATES HE WAS WORKING ON DIESEL ENGINE. FOREIGN MATERIAL BLEW IN EYE BUT NOT SURE WHEN. EMPLOYEE RETURNED TO WORK NEXT DAY COMPLAINING ABOUT HIS EYE.