Buscar en el registro

REPETITIVE MOTION DUE TO CHANGING SCREEN INTO AND OUT OF SHAKER IN LAB DURING SAMPLING ACTIVITIES.

EE WAS DISMOUNTING FROM THE DOZER AFTER FUELING THE MACHINE. EE STEPPED FROM THE BLADE ARM ONTO THE TRACK, WHEN HE PLACED HIS FOOT ON THE TRACK HE SLIPPED AND FELL. WHILE ATTEMPTING TO BREAK T HE FALL, HE LANDED ON THE GROUND ON HIS RIGHT ELBOW RESULTING IN THE INJURY.

CODE 26- SAND PLANT MAN AND USING CONTROLS (OPERATING) BOBCAT OPERATION- REPEATED USE OF ELBOW POSIBLY CAUSED INFLAMATION.

EE WAS USING A BOX CUTTER TO REMOVE INSULATION TAPE FROM ELECTRIC MOTOR CONNECTIONS THE BOX CUTTER SLIPPED THROUGH THE TAPE KNOT AND STRUCK THE EE S RIGHT THUMB AREA CAUSING A CUT. THE CUT REQ UIRED 6 STICHES TO CLOSE.

EE REPORTED THAT HE WAS INJURED WHILE SHOVELING GRAVEL FROM UNDER A CONVEYOR. HE SAID HE PULLE THE LOWER PART OF HIS BACK.

DISMOUNTING THE BOBCAT, WAS NOT HOLDING TO HANDLE AND SLIPPED- FELL ON BUCKET.

REPAIRING HOLE IN SHUTE DR IVING PIECE OF METAL WITH SLEDGE HAMMER BROUGHT HAMMER DOWN HIT THE SIDE OF THE METAL WITH FINGER KNOCKING NAIL OFF LEFT INDEX FINGER FINGER WAS XRAYED & PRESCRIPTIO N FOR PAIN

EMPLOYEE WAS ATTEMPTING TO SLIDE ON ELECTRIC MOTOR WHEN HE FELT A PULL IN HIS LEFT SIDE.

EMPLOYEE WAS DRIVING DUMP TRUCK AFTER DUMPING LOAD HE HIT A BUMP IN ROAD THAT CAUSED HIS THUMB ON HIS RIGHT HAND TO HIT THE GEAR SHIFT KNOB. THIS RESULTED IN PAIN IN THE THUMB.

REPLACING HAMMERS IN HAMMER MILL. USING ABAR AND SLEDGE HAMMER TO PRY HAMMERS OUT. PIECE OF STEEL BROKE OFF HAMMER STRIKING EMPLOYEE IN THE RIGHT THIGH.

USING HIS LEFT FOOT TO WORK THE ROAD BRAKE INSTEAD OF WORKING BRAKE. HE WAS STRIPPING AND MOVING BIG ROCK. HAS TENDINITIS IN LEFT FOOT.

WHILE WALKING FROM 1 WORK AREA INTO ANTOHER, HIGH WINDS BLEW DUST PARTICLES INTO BOTH EYES. AROUND SAFETY (PRESCRIPTION) GLASSES.

85061S HOLDING THE PIECE OF BELT HE WAS CUTTING WHEN HE REACHED TO CUT IT HE CUT HIS HAND THE PIECE OF BELT WAS WRAPPED AROUND THE TAIL PULLEY OF THE CONVEYOR AND STALLED THE BELT.

CLEANING OUT UNDER PRIMARY WITH BOBCAT BACKED UP AND HIT CONCRETE POST.CAUSING SORE AND STIFF NECK AND SHOULDER.GOING TO CHIROPRACTIC THERAPY FOR 3 DAYS.

THE TRANSMISSION BECAME HOT BECAUSE OF OVERFILL OF FLUID. THE OPERATOR MISREAD LEVEL MARK ON GUAGE AND ADDED MORE FLUID TO HOT TRANSMISSION. AFTER HE MOVED THE MACHINE AWAY FROM OIL STORAGE TA NKS, THE HOT OIL CAME OUT THE FILLER TUBE LOCATED BEHIND THE SEAT. THE HOT OIL BURNED THE OPERATOR ON THE BACK AND ARM.

CLEANING PAIN GUN WITH THINNER.HIT LEFT HAND WHILE SPRAYING MAKING A HOLE IN 1ST FINGER LEFT HAND.

SPLICING WIRE TO RE-CONNECT ON LIME MILL.7 SUTURES TO 3RD FINGER LEFT HAND.

QUICK DISCONNECT HOSE CAME LOOSE STRIKING EMPLOYEE ON LEFT SIDE OF CHIN.TOOK 5 SUTURES TO CLOSE CUT.

THE EMPLOYEE DESCENDED SCREEN 1 ONTO A SECTION OF GRATED CATWALK THAT IS 36" WIDE BY 14' LONG. HE HAD BOTH FEET ON THE CATWALK, WHICH IS LEVEL AND IN GOOD CONDITION. HE PICKED UP AN EMPTY PLAS TIC 2 GALLON JUG USED TO CARRY OIL IN AND TURNED TO WALK ACROSS THE CATWALK. THE EMPLOYEE STATED THAT AS HE TURNED TO WALK TO HIS RIGHT, HE FELT A PAIN IN HIS LEFT KNEE. HE STATED THAT HIS FO

EE WAS COMING OFF OF THE RAMP WHEN HE HIT A HOLE MEASURING 21FT WIDE BY 26FT ONG BY 5 INCH DEEP. THE AIR RIDE SEAT IN THE TRUCK FLEW UP, CAUSING HIM TO HIT THE TOP OF THE TRUCK CAB, RESULTING IN A NECK INJURY. SPRAIN.

WHILE PLACING A 11X20 METAL PLATE AT THE CHUTE THE PLATE SLIPPED AND PINNED THE EE S MIDDLE FINGER ON THE LEFT HAND BETWEEN THE PLATE AND THE METAL CHUTE. A LACERATION TO THE FINGER TIP AND TH E NAIL BED RESULTED. STITCHES REQUIRED AND NAIL WAS REMOVED.

LINING UP GEARS IN REAR INPUT SHAFT ON TRUCK,#20795,GEAR SLIPPED CATCHING EMPL LEFT INDEX FINGER BETWEEN HOUSING AND GEAR CAUSING LACERATION.

INJURED WAS CLIMBING CATWALK LADDER TO ENTER THE TRUCK. HIS RIGHT FOOT SLIPPED ON THE SECOND STEP OF THE LADDER, CAUSING THE SUBJECT TO FALL BACKWARDS STRIKING HIS HEAD AND SHOULDER ON ANOTHER PARKED TRUCK AND THEN FALLING TO THE GROUND.

EMPLOYEE WAS SHOVELING LOOSE MATERIAL UNDER THE HAMMERMILL FRAME. WHILE MOVING A FULL SHOVEL OF MATERIAL, HE TURNED VERY QUICKLY AND FELT HIS BACK PULL IN THE LOWER AREA.

GETTING INTO BOBCAT STUNG BY POSSIBLE WASP.

FUELING GENER. OPENED FUEL HOSE NOZZLE BEFORE CONNECTED WITH GENER. TANK BACKSPLASH OF DIESEL TO UPPER BODY FACE A ND EYES

HOLDING P C OF TIMBER THAT WAS BEING CUT WITH CAHIN SAW SAW SLIPPED AND CUT FINGERS