Buscar en el registro

THE LEFT FRONT TIRE WAS BEING REPLACED ON A CAT 980G LOADER. TIRE SIZE 29.5 X 25. THE INJURED EE WAS PUTTING AIR IN THE TIRE. THE AIR CHUCK POPPED OFF THE VALVE STEM AND WHEN SHE PICKED IT UP TO REPLACE IT THE TIRE EXPLODED.

EE WAS SETTING A WATER PUMP IN A ROCKY AREA TO PUMP WATER FROM PIT. EE SLIPPED ON A ROCK AND BUMPED HIS RT LEG ON THE FRAME OF THE PUMP. EE DID NOT REPORT THIS UNTIL THE FOLLOWING 10-13-98, WH EN HE GOT AN INFECTION IN HIS LEG. THERE WERE NONOTICABLE CUTS OR OPEN SORES ON LEG, ONLY BRUISEING.

LOADING FERTILIZER FROM TRAILER TO THE TRUCK, SLIPPED & TWISTED HIS ANKLE.

MISJUDGED TURNING DISTANCE, ROLLED DOWN SIDE OF PIT. HIT HEAD ON A SUPPORT & CAAUSED STITCHES, BRUISES CAUSED FROM SEAT BELT.

EE WAS CLEANING MUD OFF A PULLEY WITH A STEEL ROD, WHILE CONVEYOR WAS RUNNING. THE BELT GRABBED THE ROD, PULLED HIS LEFT FOREARM INTO THE GUARD, CUTTING HIS LEFT FOREARM.

DRIVING A PIN INTO THE TRACKS ON A DOZER WHEN A PIECE OF METAL SHEENED OFF THE PIN HITTING EE IN THE EYEBROW ABOVE HIS RT EYE

85061S HOLDING A CORNER OF A BOX BLADE OF A TRACTOR WHILE I.NAME WAS USING A 6 LB SLEDGE HAMMER TO STRAIGHTEN THE CUTTING EDGE. I.NAME SWUNG THE HAMMER, MISSED THE CUTTING EDGE, COMING 180 DEG 95520HITTING HIM IN THE FACE BELOW HIS EYE.

85061S USING A BAR TO PRY A ROCK LOOSE TO GET IT DOWN IN THE JAW. THE BAR SLIPPED BENDING HIS WRIST BACKWARDS CAUSING A SPRAIN.

WAS GETTING OFF3OF LADDER WHEN HE STUMBLED AND FELL

HE WAS GETTING 2UT OF PIT TRUCK AND JUMPED,FRACTURING RIGHT ANKLE.

EMPLOYEE WAS HELPING TAKE A RADIATOR OUT OF A TRUCK AND WHEN HE WENT TO SET IT DOWN IT SLIPPED ON HIS FINGERS. THE MIDDLE & INDEX FINGERS. HE HAD NO LOST TIME.

LIFTING TIRE FOR MOUNT ON PIT TRUCK-CAUSED SEVERE PAIN IN BACK.

WAS SHOOTING SHOT OF POWDER ANDWAS IN THE ENDUMP FOR PROTECTION AND A CLOD OF DIRT (MUD) GLANCED OFF OF BED OF ENDUMP AND WENT THROUGH THE DOOR OF ENDDUMP AND HIT HIS ANKLE.

OPERATOR WAS MOVING THE DRILL OVER TO THE TRUCK TO PUT FUEL INTO THE DRILL. I.NAME WAS STANDING BETWEEN THE DRILL AND THE TRUCK, THE OPERATOR DID NOT SEE HIM AND MASHED HIM BETWEEN THE TRUCK AND THE DRILL, CAUSING BRUISES ON THE UPPER & LOWER ABDOMEN AND BACK.

WAS PICKING UP KELLEY TO HELP PUT ON DRILL & HURT HIS BACK.

HE WAS GREASING GEAR BOX AND HIS COTTON GLOVE GOT CAUGHT IN THE BELT. END OF MIDDLE FINGER WAS CUT OFF ON HIS LEFT HAND.

HE WAS USING A 2 X 4 TO CLEAN THE MUD OFF THE TAIL PULLEY ON A CONVEYOR BELT. THE BOARD WAS CAUGHT AND JERKED IT UP PINNING HIS HAND AGAINST THE CONVEYOR FRAME

HE WAS TRYING TO FREE A ROCK LODGED IN THE JAW OF THE CRUSHER. HE WAS USING A SLEDGE HAMMER TO TRY AND BREAK THE ROCK WHEN IT BOUNCED OFF OF THE ROCK AND HIT HIM ON THE LEG.

HAD BEEN WELDING WHEN FINISHED HE WAS CLEANING SLACK FROM THE WELD WITH A CHIPPING HAMMER AND A PIECE OF THE SLACK HIT HIM IN THE EYE.

SHARPENING ROCK BITS AND WHEN GRINDER HIT THE BIT A PIECE OF IT FLEW OFF ANDINTO HIS EYE.

EMP WAS ON CRUSHER CUTTING TORCH WHEN TORCH FLASHED & CAUGHT ON FIRE. BURNED RIGHT SIDE OF FACE EYELID AND BROW. FIRST DEGREE BURN TO FACE & EYE, DR PRESCRIBED OINTMENT AND AN EYE PATCH

HE WAS WELDING ANDHAD WELDED A BEAD AND WAS USING A CHIPPING HAMMER TO CLEAN THE BEAD OFF WHEN A SMALL PIECE OF SLAG STUCK IN HIS RIGHT EYE