Buscar en el registro

Employee was stepping onto the conveyor walkway when his foot slipped off. He then grabbed the handrail which spun him around and twisted his back.

Stepped on pipe. Foot slipped, twisted left ankle.

Employee was stepping up a 3' step ladder. As he stepped onto the 2nd step he felt a pop in his left knee.

OPERATOR, CHANGING A FUSE, RECEIVED AN ELECTRIC SHOCK. HE DID NOT USE A HOT STICK OR GLOVES. HE DID NOT RECEIVE ANY INJURIES BUT WAS SENT TO THE DOCTOR TO BE CHECKED OUT. HE DID NOT USE LOCK-OUT TAG-OUT PROCEDURES.

WHILE CHANGING A VALVE ON TOP OF THE CEMENT SILOS, EMPLOYEE SMASHED HIS RIGHT RING FINGER WITH A HAMMER.

According to most recent audiogram, ee has suffered recordable hearing loss in left ear. This ee may be exposed to noise above 85 decibels (A-scale) for an 8-hour time weighted average while on the job. Hearing conservation training & hearing protection has been provided to ee upon hire & annually thereafter. In addition, ee's supervisor has been trained in hearing conservation.

EE WAS WORKING IN AN AREA NEXT TO ANOTHER EE WHOWAS USING A GRINDER. EVIDENTLY A PIECE OF METAL FLEW INTO HIS RIGHT EYE. THE NEXT DAY HE WAS STILL BOTHERED IN HIS RIGHT EYE & WAS SENT TO A ME DICAL CLINIC & A PIECE OF METAL WAS REMOVED FROMRIGHT EYE. NO LASTING DAMAGE FROM INJURY. HE WAS WEARING SAFETY GLASSES.

EE DISASSEMBLED A SLURRY PUMP FOR INSPECTION. AS HE BEGAN TO ASSEMBLE THE PUMP, ONE OF THE PARTS LANDED ON HIS FINGER WHILE ATTEMPTING TO INSTALL IT.

EE WAS PUSHING AN OIL PIPE INSIDE THE K-3 BURNER. THE PIPE FLIPPED AND CRUSHED HIS RIGHT HAND INDEX FINGER.

THE MILL BALL CLASSIFIER BROKE SPILLING SOME BALLS ON THE GROUND. EMPLOYEE WALKED THRU AREA AND SLIPPED ON A MILL BALL. (TEMPORARY LABORER) NOT A COMPANY EMPLOYEE.

EMPLOYEE GETTING INTO BOAT TO GO TO DREDGE AT 5:00 AM AND STEPPED DOWN. STEPPED ON CHAIN AND TWISTED RIGHT ANKLE.

WHEN A BACKEND SEAL ON KILN #2 WAS CLOSED, A PIECE OF METAL FELL AND HIT EMPLOYEE'S RIGHT PINKY FINGER. CONDITIONS WERE GOOD. THIS BECAME REPORTABLE 10/6/03 WHEN EMPLOYEE WENT FOR TREATMENT.

AREA IN GOOD CONDITION. WHILE HAMMERING, A PIECE BROKE OFF THE HEAD OF THE HAMMER AND PENETRATED HIS LEFT FOREARM.

EE WAS IN THE PROCESS OF ALIGNING TWO BRACES TO BOLT THEM TOGETHER, AS THE PIECES WERE BEING ALIGNED, THE EE'S FINGER WAS PINCHED BETWEEN THE TWO BRACES CAUSING THE LACERATION.

STAIRS IN GOOD CONDITION, NO AMBIENT DUST OK VISABILITY. AS EE MADE HIS WAY DOWN THE STAIRS HE TWISTED HIS FOOT. EE HAD VARIOUS TOOLS AND MATERIALS WITH HIM.

EE WAS USING A COME-A-LONG TO TIGHTEN A CABLE CONNECTED TO BEAMS FOR ALIGNMENT, THE CABLE SNAPPED UNDER PRESSURE CAUSING THE COME-A-LONG TO STRIKE THE EE IN THE FACE, KNOCKING HIM DOWN CAUSI NG A LACERATION TO HIS LEFT CHEEK /FACE.

EE WAS LOADING A PIECE INTO THE LATHE CHUCK WHENTHE PIECE SLIPPED OUT & HIS FINGER GOT CAUGHT BETWEEN THE PIECE & LATHE BED

WHILE EE WAS DOING HIS JOB CLIMBING AND KNEELING TO SERVICE EQUIPMENTS, HE STARTED FEELING SOME PAINS IN THE INSIDE OF HIS LEFT KNEE.

EMPLOYEE WAS ASSIGNED THE TASK OF CHANGING OUT THE CENTER BOLT OF A WIND BRACE WITHIN THE RAW MILL STRUCTURE. A COME-ALONG SHOULD HAVE BEEN USED TO SUPPORT THE WIND BRACE BUT WAS NOT. HE LOOSENED THE BOLT AND USED HIS RIGHT MIDDLE FINGER TO PUSH THE BOLT OUT OF THE BOLT HOLE. AT THAT POINT THE BRACE SHIFTED, AMPUTATING THE END OF HIS FINGER NEAR THE FIRST JOINT.

GOOD, CLEAN, CLEAR DAY. EE WAS WALKING DOWN THE STAIR FROM K346 TO K348 ON TOP OF THE CLINKER SILOS, WHEN HE SLIPPED AND TWISTED HIS KNEE.

NIGHT, UNEVEN FLOOR, SOME MUD. EE WAS CHECKING LOCKS ON EMPTY HOPPERS AND STRIKING THEM WITH A SLEDGEHAMMER WHILE THE RAILCARS PASSED BY. AS HE SWUNG THE HAMMER, HE MISSED THE LOCK & TWISTED HIS BACK.

DRY AREA, HAMMER IN GOOD CONDITION, CLEAN CONVEYOR BELT. WHILE EE USED A HAMMER, IT BROKE TO PIECES AND LACERATED HIS ARM. A PIECE IMBEDDED HIS ARM.

CONDITIONS GOOD, EE WAS NAILING WHEN HE FELT SOMETHING ON HIS ARM. HE NOTICED HIS ARM BLEEDING, A METAL CHIP MUST HAVE GONE INTO HIS ARM.

CHUTE WAS PLUGGED & OVERFLOWED MATERIAL ONTO THE TAIL PULLEY. EMPLOYEE WAS CLEANING THE AREA WITH A WATER HOSE. IN THE WET CONDITIONS HE SLIPPED & FELL, HURTING HIS RIGHT KNEE.

CLEAR, SUNNY DAY. EE STATED HE WAS WORKING AT TOWER 80 WHEN HE LIFTED A HEAD PULLEY COVER AND FELT SOMETHING IN HIS LOWER BACK.

MILD - A BRICK FELL FROM A SCAFFOLD AND HIT EMPLOYEE ON HIS RIGHT SHOULDER.

CONDITIONS WERE FINE; AREA WAS CLEAN; DAY WAS CLEAR; NO BAD WEATHER. EMPLOYEE WAS DESCENDING STAIRS WHEN HE STEPPED ON A ROCK AND TWISTED HIS RIGHT ANKLE.

DUSTY AIR; EMPLOYEE WAS CLEANING THE DUST COLLECTOR WHEN DUST IN THE AIR FELL INTO HIS EYE.

ALOT OF DUST, HOT MATERIAL. EE WAS OPENING THE COVER FROM THE CHUTE WHEN A BOLT BROKE AND THE DOOR LANDED ON HIS KNEE.

CLEAR & SUNNY; NO UNUSUAL CONDITIONS. EMPLOYEE WAS USING A WRENCH TO INSTALL A RADIATOR WHEN IT SLIPPED AND JAMMED HIS RIGHT RING FINGER.

EMPLOYEE OPENED THE DOOR IN THE DUST ELEVATOR CHUTE. DUST FELL INTO HIS LEFT EYE.

STAIR WAS CLEAN, EMPLOYEE WAS ON HIS WAY TO GREASE UP A VALVE IN SILO #7. HE SLIPPED ON ONE OF THE STAIR'S STEP AND FELL DOWN.

DUSTY, A METAL PLATE WAS WELDED TO THE SIDE OF STAIRCASE OBSTRUCTING THE PATH.

ENVIRONMENTAL CONDITIONS NOT A FACTOR. EE WENT TO PAINT THE TOP SIDE OF DRAG MOTOR NUMBER TWO; HE CLIMBED UP PUTTING ONE FOOT ON COMPRESSOR AND THE OTHER ON THE MOTOR BASE. EE LOST HIS BALANCE AND FELL FROM A HEIGHT OF 2 1/2 - 3 FEET. HE WAS WORKING WHILE MACHINE WAS OPERATING.

METAL CATWALK WITH COAL ON IT. EMPLOYEE WAS USING A WATER HOSE TO CLEAN MATERIAL OFF OF CATWALK. WHILE MOVING TO A NEW AREA, HE SLIPPED.

EMPLOYEE PULLED HIMSELF UP ONTO THE RAIL CAR AND FELT A POP ON HIS LEFT ELBOW.

GOOD COOL TEMPERATURE. EE WAS CUTTING THE DUMP CABLE WITH A BLOW TORCH WHEN THE CABLE SWUNG AND STRUCK HIM IN HIS RIGHT HAND.

EQUIPMENT WAS RUNNING, HOT AIR WITH GREASE. EE WAS PERFORMING HIS DAILY INSPECTION WHEN HE FOUND THE AIR LINE FOR OUTLET BEARING PLUGGED, HE PROCEEDED UNPLUGGING THE LINE WHEN SUDDENLY HOT GREASE BLEW OUT BURING HIS LEFT HAND.

CLEAR DAY, NORMAL CONDITIONS. EMPLOYEE WAS REMOVING A ROCK WHEN HIS RIGHT PINKY FINGERTIP WAS CRUSHED INBETWEEEN THE FALLING ROCK AND A METALLIC SURFACE, CAUSING HIM TO LOSE HIS FINGERNAIL.

DRY, CLEAN, DAY LIGHT. EMPLOYEE WAS PICKING UP PIECES OF METAL AND PLACING THEM INSIDE A LOADER BUCKET TO BE THROWN AWAY. WHILE PICKING UP A PIECE OF METAL, ANOTHER PIECE ON TOP OF IT SLID AND TOOK OFF HIS LEFT HAND MIDDLE FINGERNAIL.

BRIGHT SUNNY DAY, EE WAS USING A SLEDGE HAMMER TO REMOVE A PAIN MIST CAUSING HIM TO PULL HIS RIGHT SHOULDER.

GOOD WEATHER MUDDY ROAD CONDITIONS, LIGHTING WAS FAIR EQUIP CONDITION GOOD. EE WAS PUSHING INTO THE FEEDER AND THE CONTROL TOWER OPERATOR MOVED THE TRIPPER CAUSING ROCKS TO FALL ON TOP OF THE DOZER AND WHILE OPERATOR ESCAPED HE HURT HIS RIGHT KNEE.

BRIGHT, WARM, SUNNY. EMPLOYEE WAS ADDING OIL TO THE LOADER AND SOMETHING FELL INTO HIS LEFT EYE.

MUDDY AREA, NIGHT DARK AREA, PRY BAR CAME LOOSE FROM WHERE THE EMPLOYEE PLACED IT CAUSING HIM TOFALL BACKWARDS.

NORMAL, STICKY MATERIAL, EMPLOYEE WENT TO PUSH IN THE FEEDER. IT CAME DOWN AND DOZER WENT INSIDE CAUSING HIM TO CUT HIS RIGHT ELBOW, BRUISE THE RIGHT SIDE OF HIS FACE AND BREAK A TOOTH.

DUSTY ATMOSPHEREE CAUSED DUST TO FALL ON HIS NECK.

NIGHT, PLENTY OF LIGHT, SPOTLIGHTS. WHILE ENTERING TEMPORARY TRAILER STAIRS, EE MOVED OR SHIFTED & FELL DOWN.

OVERCAST DAY, SAND & ROCKS AROUND THE FUEL TRUCK, EE BENT HIS KNEES AS HE PULLED ON THE HOSE WHEN HE FELT PAIN.

THE MATERIAL LOADED IN THE BACK OF THE TRUCK WAS DONE POORLY AND WAS VERY DIFFICULT TO WORK WITH.

FUEL ON THE FLOOR CAUSED EMPLOYEE'S BOOTS TO BE SLIPPERY.