Buscar en el registro

EE WAS CLEANING UP AT THE PLANT HE REACHED DOWN TO PICK UP SOMETHING, WHEN A DOG BIT HIM ON THE WRIST.

EMPLOYEE WAS STEPPING OUT OF HIS HAUL TRUCK, HE DID NOT REALIZE THAT HIS HAND WAS IN THE WAY ANDHE SHUT THE DOOR ON HIS HAND.

WHILE EMPLOYEE WAS WORKING ON OUR PLANT, THE WIND BLEW SOMETHING IN HIS RIGHT EYE.

EMPLOYEE WAS CHANGING THE SCREEN ON THE SCREEN DECK ON THE PLANT.

EE WAS SHOVELING UNDER A CONVEYOR BUT EE SMASHED HIS FINGER ON THE FRAME ON EQUIPMENT.

EMPLOYEE WAS WORKING ON A WASH PLANT, WHEN A PIECE OF BAR ON THE WASH PLANT STRUCK LEFT SIDE OF HIS HEAD.

HOT WATER & STEAM SPURTED ON EE'S R LOWER LEG

EE WAS FIGHTING WITH ANOTHER EE WHEN HE HEARD AND FELT HIS RIGHT KNEE POP.

EMPLOYEE WAS REPAIRING THE LOG WASHER. AS HE PREPARED TO REMOVE THE DRIVE COUPLER, EMPLOYEE SMASHED HIS HAND.

EE WAS USING A SHOVEL AT THE BASE STACKER. HE FELT THAT HIS BACK WAS HURTING HIM A LITTLE AND HE WAS SORE. WHEN HE TRIED TO GET UP THE NEXT MORNING, HE COULD HARDLY MOVE.

SHOVELING OFF THE CATWALK AT THE CRUSHER.

EE HAD HOOKED UP A NEW DRIVE MOTOR WHEN HE NOTICED THE THE MOTOR WAS TURNING BACKWARDS. THE EE SHUT OFF THE MOTOR IN THE FUSE BOX TO SWITH THE NEUTRAL LEGS SO THE MOTOR WOULD RUN FORWARDS. INS TEAD OF WORKING WITH THE NEUTRAL LEGS, HE TOUCHED THE ENERGIZED LEGS WHICH RESULTED IN AN ELECTRICAL FIRE/FLASH.

EMPLOYEE WAS CLIMBING DOWN JAW CRUSHER STRUCTUREWHEN A ROCK FELL OUT OF FEED ONTO HIS LEFT HAND, BREAKING HIS LEFT INDEX FINGER.

WRIST STRAIN FROM REPETITIVE WRIST/ARM MOVEMENTSRIGHT WRIST-OPERATING 631 SCRAPER.

EE WAS TIGHTENING A BOLT ON A SCRAPER, THE BOLT BROKE HITTING HIM IN THE FOREHEAD WITH THE RATCHET.

EE WASHING A WINDSHIELD ON HIS LOADER, WHEN STEPPED OUT ON THE TIRE, HE SLIPPED AND FELL.

EMP WAS STEPPING DOWN FROM SCRA[ER AND TWISTED HIS RIGHT ANKLE.

EE WAS HOLDING A DRIFT BAR WHILE ANOTHER EE WAS HITTING THE BAR WITHA 16 LB HAMMER. THE EE WHO WAS USING THE HAMMER MISSED HITTING EE IN THE UPPER RT LEG.

EMPLOYEE WAS CUTTING UP AN OLD CONVEYOR BELT AT THE CRUSHER. THE KNIFE HE WAS USING SLIPPED AND CUT HIS LEG.

EE WAS USING A TIRE SPLITTING TOOL. HE PLACED HIS WEIGHT ON THE TOOL, THE TOOL SLIPPED AND SMASHED HIS R MIDDLE FINGER BETWEEN THE TOOL AND RUN.

EMPLOYEE WAS STARTING TO SERVICE A TRUCK IN SNHOP. HE REACHED OVER HTE FRAME TO GRAB THE DIV E LINE AND HURT HIS LEFT SIDE. WENT TO URGENT CARE CLINIC BECAUSE IT WAS NOT GETTING ANY BETTER. EMPLOYEE REPORT INJURY ON 6/13. HE THOUGHT THAT HE WOULD GET BETTER, AND WHEN IT DID NOT, HE CAME TO ME.

EE GOT HURT WHEN HE WAS COMMING DOWN FROM THE CRUSHER.

EE WAS INSTALING A DRIVE LINE IN A LOADER. THE WHEELS WERE BEING LOWERED BY THE BUCKET, & HIS L KNEE GOT UNDER THE CENTER PIN OF LOADER. HE JERKED TO GET FROM UNDER IT & HE HURT HIS BACK.

I AM ENCLOSING A WORKMAN COMP REPORT FOR ONE OF OUR EE THAT CLAIM THAT HIS BACK PROBLEM IS DUE TO WORKING ON OUR PLANT. WE FEEL THAT IT IS NOT A WORKMANS COMP INJURY, BUT HE HAVE TO FILE A REP ORT ANYWAY. I WAS NOT SURE IF I NEED TO SEND A REPORT TO YOU, SO I FIGURED I BETTER JUST IN CASE. KEEP IN MIND, THE EE DID NOT REPORT ANY INJURY WITH SUPERVISOR.

EMPLOYEE WAS WORKING ON THE PLANT. HE WAS FINISHED AND COMMING DOWN HE LOST HIS FOOTING ON THE LAST STAIR AND FELL.

EMPLOYEES LOADER WAS ON FIRE HE WAS USING A FIRE EXTINGUISHER WHEN HE LOST HIS FOOTING & FELL

EMPLOYEE LAID DOWN ON A COUPLE OF BOXES OF ROOF THAT WERE IN THE STORAGE ROOM PLANT MANAGER CHECK ON HIM THEN REALIZED SOMETHING WAS NOT RT WITH EMPLOYEE

EMPLOYEE WAS LOOSENING BOLTS ON A PETERBILT TRUCK.HE FELT A POP,THEN PAIN.

EE HAD A VERY BAD REACTION TO A BEE STING HE WAS ON THE 631 SCRAPER.

EMPLOYEE WAS USING A CUTTING TORCH. A SPARK CAME UP AND BURNED THE EMPLOYEE ON THE RIGHT HAND.

EMPLOYEE WAS DRIVING HIS SCRAPER HE GOT STUNG BY A BEE EMPLOYEE WAS HAVING A REACTION TO THE STING

WORKING ON SCRAPER STEPED DOWN FROM SCRAPER SLIPPED CUT ARM ON CORNER OF BOX

EMPLOYEE WAS LIFTING SOMETHING THEN HE FELT SHARP PAIN ON L SIDE OF NECK AND DOWN L ARM.

BEE STING ON ARM

EMPLOYEE WAS AT PETERSON TRACTOR WORKING ON ONE OF OUR PIECES OF EQUIPMENT E SMASHED HIS HAND & WHEN HE STOOD UP HE BLACKED OUT HE FELL AT THE PIECE OF THE EQUIPMENT ONTO THE WORK TABLE & ONTO THE FLOOR

EMPLOYEE WAS USING A CUTTING TORCH ON A SCRAPER,A PICE OF HOT SLAG FELL INTO EMPLOYEES LEFT EAR.

EMPLOYEE WAS WORKING THE PLANT. HE WAS REPLACING CLAMPS ON THE YIGS, HE CUT HIMSELF WITH A PIECE OF WIRE ON THE CLAMP.

EMPLOYEE WAS PUTTING ON NEW BEARINGS ON LOG WASHER A BEARING POPPED OUT AND HIT EMPLOYEE ON MIDDLE FINGER.

EMPL TIGHTENING BOLT ON EXCAVATOR.BREAKING BAR SLIPPED AND HIT EMPL IN MOUTH.

WORKING UNDER TRUCK, TRIED TO STAND UP FELT SHARP PAIN IN MIDDLE OF BACK

EMPLOYEE WAS LIFTING UP A CUTTING EDGE AND MOVING IT OVER TO A DIFFERENT PLACE HE WENT TO SET IT DOWN AND A STEEL SLIVER CUT HIS L THUMB.

EMPLOYEE WAS LIFTING SOME SCRAP IRON INDUSTRIAL BOLTING IRON PIPE IN THE YARD

EMPLOYEE WAS LOCKING UP THE COMPUTER KEYES IN A FIRE PROOF METAL SAFE. SHE SHUT THE DOOR ON HER RIGHT MIDDLE FINGER.

EMPLOYEE HAD BROUGHT HIS EXCAVATOR INTO THE SHOP TO GREASE IT AND PREPARE IT FOR THE NEXT DAY'S WORK. HE WAS GREASING THE BOTTOM OF THE EXCAVATOR WHEN HE STOOD UP AND WAS TURNING AROUND AND HE TWISTED HIS BACK.

EMPLOYEE WAS TRYING TO FIX A CABLE ON ROVER ON THE DW21 THE ROLLER CAME LOOSE & HIT THE FRONT OF HIS LEG

EMPLOYEE WAS WELDING ON THE SCRAPER. THE WELDING ROD GOT STUCK. HE WAS PULLING IT APART AND A PIECE OF THE WELDING ROD FELL ON HIS LEG.

EMPLOYEE WAS ON TOP OF THE VIBRATING GRIZZLEY WHEN A ROCK FELL OFF THE BELT & SMASHED <R| INDEX FINGER AGAINST ANOTHER ROCK

EMPLOYEE WAS IN A BIG TANK ON OUR SAND PLANT ABOUT 700 AN WHEN HE SLIPPED & WHEN HE DID HIS RT LEG WENT ONE WAY & HIS BODY WENT ANOTHER IN RETURN HE TWISTED HIS R LEG & HURT HIS R KNEE

EMPLOYEE WAS OPERATING A LOADER WHEN HE STARTED ACTING STRANGE-SOON AFTER HE HIT THE OFFICE WITH THE FRONT END LOADER-WE BELIEVE HE HAD A DIABETIC REACTION WHILE DRIVING EQUIPMENT.

EMPLOYEE WAS WORKING ON TOP OF THE PLANT POCKING OUT THE HOPPER WHEN EMPLOYEE CAME UP FROM DOING SO, HE FELT HIS BACK POP.