Buscar en el registro

EE was taking cutting edge off blade of dozer blade slid off behind EE and when it fell it struck another cutting edge on the ground & a chip flew out & struck EE in the back of left leg above knee puncture back of left leg above of knee

Employee was loading a part onto a truck. As the part was coming onto the trailer, he started to step onto the trailer. The lifting apparatus broke causing the part to strike the trailer causing him to be thrown to the ground.

I was walking up steps to the breaker when a piece of coal hit my left eye.

Was running dozer-ripping rock-ripper tooth came loose. Found it in shock and shook it loose with his foot, knelt down on right knee to pick it up and slipped carrying it to the dozer.

LOADING MATERIAL INTO COMPANY TRK SLIPPED STEPPING DOWN FROM REAR BUMPER TURNED RIGHT FOOT & ANKLE

SHOVELING OUT A TAIL PULLEY OF CONVEYOR, BENDINGOVER AT TIME MOVING LEFT TO RIGHT

CLIMBING OFF DOZER STEPPE3D INTO A HOLE TWISTED BACK.

SLIPPED OR STEPPED WRONG,TURNED LEFT ANKLE.

TURNED ON HEATER IN MACHINE & SOMETHING HTI RIGHT EYE.

WALKING UP A SNOWY SLIGHT INCLINE SLIPPED AND FELL ON BACK.

WAS GETTING A BOX FROM TRUCK AND TWISTED RT KNEE.

FELL ON ICE IN PARKING LOT, HURT LEFT ARM, SHOULDER AND NECK, HIP, THIGH.

EMPLOYEE WAS GRINDING BEARING OFF SHAFT AND SPARKS FLEW OFF AND CAUGHT SHIRT ON FIRE.

BELT ON CONVEYOR WAS SLIPPING I WAS CHECKING THE COAL, I FELL ON LEFT SHOULDER AND PULLED MUSCLES IN LEFT SHOULDER.

PULLING & STRETCHING A SIX INCH AROUND WATER HOSE

INSPECTION PLATE COVER ON CHAIN CASE SWUNG DOWN AND AROUND, SMASHING ARM BETWEEN INSPECTION PLATE COVER AND CASE CUTTING THE ARM.

GETTING ON MACHINE SLIPPED GRABBED HAND RAILS INJURING MUSCLES IN GROIN

WAS WASHING THE TOP OF RAW COAL SUMP,THE NOZZLE CAME OFF AND CUT HIS LEFT PALM.

EMPLOYEE WAS CLIMBING ONTO THE DOZER WITH CAT SPADS IN HIS HAND. WHEN HE PUT THE SPADS AWAY HIS FEET SLIPPED OUT FROM UNDER HIM, AND HE FELL ABOUT ONE FOOT. HE CAUGHT HIMSELF AND IN DOING THAT HURT HIS NECK.

EMPLOYEE WAS GETTING OUT OF THE GRADER CAB AFTER HE HAD LOADED IT ON THE LOWBOY. HE LOST HIS FOOTING AND TRIED TO CATCH HIMSELF TO KEEP FROM FALLING. HE HURT HIS LEFT SHOULDER AT THIS TIME.

EE WAS GETTING ON HIS MACHINE AT STARTING TIME AND SLIPPED ON SOME LOOSE ROCKS AND FELL DOWN ON THE TOP OF THE TILT CYLINDER.

EMPLOYEE HAD THE DOOR TO THE TOOL BOX OPEN & WAS GETTING HIS BOOTS & CAT SPADE OUT AS HE WAS PULLING HIS BOOTS OUT THE LID FELL ON HIS RT HAND

EMPL WAS TRYING TO TRIM EXCESS SILICONE OFF OF FILTER DISC WITH RAZOR NIFE. KNIFE WAS IN LEFT HAND HE WAS HOLDING SILICONE WITH RIGHT HAND WHEN KNIFE SLIPPED & CUT RIGHT THUMB.

EMPLOYEE WAS PUTTING A SALMANDER TOGETHER AND CUT HIS RIGHT FIFTH FINGER.

EMPLOYEE WAS WALKING TO CHECK HOSE AND SLIPPED ON FROZEN GROUND.

TILTING BARREL OF FUEL AND PULLED SOMETHING IN L ARM

WELDER WERE LOWERING A TRELEX RUBBER PIPE WITH A CAST IRON ELBOW ATTACHED. THE LOWERING CHAIN GOT CAUGHT ON THE FLOORING ABOVE THAT CAUSED SLACK IN CHAIN. IT BROKE LOOSE FROM THE FLOOR AND TRE LEX HIT EE ON THE LEG AND KNOCKEDHIM OFF THE PLATFORM. HE FELL 6 TO 7 FT TO THE FLOOR.

EMPL WAS SETTING UP FUEL OIL BARREL ROLLED BARREL OUT OF BACK HOE BUCKET ONTO GROUND TURNED IT UPRIGHT BY PICKING UP ONE END & BACK WENT OUT OF PLACE.

EMPLOYEE WAS GETTING INTO THE 275 HI-LIFT AND HIT HIS HEAD ON THE MIRROR.

REPORTED TO US THAT HE WAS NOT HURT & WOULD NOT GO TO DR & BECAUSE OF THIS I DID NOT REPORT TO MSHA AT THAT TIME. ON 3/7/91 WORKERS COMP FORM FILLED OUT BY EMPL & SENT FROM DRS OFFICE. TREATME NT & CHARGES GO BACK TO 8/28/90. WAS OFF WORK FOR 6 MONTHS & DIAGNOSIS WAS HEADACHE.

EMPLOYEE WAS STANDING ON PLATFORM CLEANING REFUSE CHUTE. HE STARTED TO SLIP AND TRIED TO CATCH HIMSELF AND HIT BACK OF HAND ON METAL BOX. IT WAS RAINING AT THE TIME OF ACCIDENT.

EMPLOYEE WAS PULLING NAILS FROM CONCRETE FORMS USING TWO HAMMERS HITTING ONE WITH THE OTHER, HAMMER HEAD CHIPPED AND WENT INTO RT. FOREARM.

EMPLOYEE WAS HELPING TO REBUILD A 6" DIESEL PUMP, CARRYING A RADIATOR HE CONTRACTED A SHARP PAIN IN LOWER BACK.

EMPLOYEE WAS LOADING A BARREL OF FUEL INTO THE HOE BUCKET AND WHEN HE TURNED TO ROLL BARRAL INTO THE BUCKET HE TWISTED HIS BACK.

EMPLOYEE WAS RAISING PUMP OUT OF HOLE AND PIPE SLIPPED OUT OF COMEALONG AND HIT HIM IN THE MOUTH.

EE WAS CLEANING CATS WITH CAT SPADE AND HURT LOWER BACK.

EMPLOYEE WAS SITTING UP MACHINE. WHEN CLIMBING DOWN FROM DOZER HE SLIPPED HITTING RIGHT ELBOW ON TRACKS.

EMPLOYEE WAS TIGHTENING THE BOLTS ON THE HYDRAULIC TANK OF THE CATERPILLAR D9L. AS HE WAS PULLING ON THE WRENCH IT SLIPPED CAUSING HIM TO LOSE HIS BALANCE AND HE FELL 8 FT. TO THE GROUND.

EMPLOYEE WAS WALKING IN THE WOODS AND A FOREIGN OBJECT FLEW INTO LEFT EYE.

EMPLOYEE WAS CLEANING UP AREA AFTER SERVICING EQUIPMENT. WHEN BURNING CARDBOARD AND USED AIR FILTERS A FILTER ROLLED BACK AND THE PLASTIC THAT WAS BURNING HIT HIS RIGHT HAND CAUSING BURNS.

EMPLOYEE WAS REPAIRING INTER LOCK CHAIN. IT SLIPPED AND FELL ON RIGHT HAND CAUSING CONTUSIONS AND LACERATIONS TO FINGERS.

EMPL WAS UP ON ROOF OF DRAG CHECKING FRICTION WHEN HE SLIPPED & FELL THROUGH FRAME THAT GOES ACROSS ROOF OF DRAG. WHEN HE FELL HE HIT A BOLT STICKING OUT OF FRAME.

EMPLOYEE WAS GOING DOWN HILL SIDE TO CHECK HOPPER FOR COAL & SLIPPED & FELL

EMPLOYEE WAS CLIMBING ON THE D & R SCREEN HOOKING UP A SET OF COMALONGS HE SLIPPED & FELL 51/2 FT HITTING DR SCREEN ON THE WAY DOWN HE HIT THE SP RINGS ON HIS RT BACK ON LOWER PART OF RIBS ALS O SCRAPED RT WRIST ON THE INSIDE & HIT LEFT ELBOW ON SAME SCREEN

INJURED WAS ATTEMPTING TO BRING DOWN THE STEPS A DAMAGED ROLLER THAT HA DBEEN ON THE DECK OF THE ROTARY BREAKER. THIS ROLLER WEIGHT 200-250 LBS. THE ROLLER HIT HIM ON THE LEFT KNEE AND LEFT FOOT.

EMPLOYEE WAS CLEANING COAL AND HIT HIGH WALL WITH BUCKET OF PIT TRACTOR. THE SUDDEN STOP CAUSED HIM TO JERK HIS NECK.

I.NAME CHECKING 3" PUMP THAT HAD QUIT PUMPING.TRIED TO STRAIGHTEN DISCHARGE HOSE,IT CAME LOOSE FROM PUMP THROWING HOT WATER ON HIS ARMS AND LEGS.

I.NAME RUNNING FROM RR CARS TO LOADOUT TOWER JUMPED UP ON PLATFORM ,TWISTED HIS BACK.

I WAS WRITING TRUCL LOADING TICKETS.MY TRUCK WAS PARKED BESIDE A STOCK PILE.WHEN GOING TO TRUCL I STEPPED ON LUMP OF COAL AND TURNED RIGHT ANKLEAND FELL AGAINST TRUCK.

EMPL WAS PERFOMING MAINT ON BATTERY CLEANED AROUND BATTERY POST WITH SCREW DRIVER AND IT WENT THROUGH CASEING MAKING A HOLE THE HE USED A WIRE BRUSH ON CABLE TERMINAL AND BATTERY BLEW UP