Buscar en el registro

ROOF FALL IN #4 ENTRY 225' FROM THE FACE. 25'L, 18'W, 0' TO 4.5'H. TIMBER IT OFF & MOVED OUT OF HEADING BACK TO A SETTING OF ROOMS ON INTAKE SIDE.

CUT INTO OLD MINE.

DRIVING TANDEM TRUCK HAULING REJECT RAISED BED TO DUMP AND TRUCK TURNED OVER TRANSMISSION SHIFT LEVER STRUCK BACK BRUISED BACK.

WALKING FROM MINER TO FEEDER, A PIECE OF ROCK FELL FROM BETWEEN BOLTS HITTING LEFT SHOULDER. CONTUSION OF LEFT SHOULDER.

CHANGING BRAKE SHOES ON TRUCK USING A BAR TO HOLD A SPRING BACK. BAR SLIPPED CAUGHT FINGER BETWEEN BRAKE SHOE AND ANCHOR.

HORSE BACK S BREAKS OUTBY FACE IN #5 ENTRY-RE- TURN.

INSTALLING ROOF BOLT: BENDING ROOF BOLT TO FINISH INSTALLING LAST BALANCE & FELL.

INSTALLING ROOF BOLTS PIECE OF ROCK FELL FROM TOP HITTING & BRUISING LEFT LEG.

HELPING PUT BOLTS IN LID ON MINER. A ROCK FELL OUT FROM BOLTS AND RIB. CRUSHED VERTEBRAE.

PULLING MINER CABLE STRAINED LOWER BACK.

CRAWLING AND PULLING 2 INCH WATERLINE BRUISED RIGHT KNEE.

CRAWLING PULLED MUSCLE IN NECK

PULLING CABLE THAT SUPPLIES POWER TO JOY LOADER BACK STRAIN

HE WAS TRAMMING BOLT MACHINE TO PUT UP A BOLT AND HE TRAMMED THE MACHINE UPON HIS RIGHT LEG.

MOVING MIENR FROM ONE LOCATION TO ANOTHER. SAID HE RECEIVED A SHOCK FROM THE REMOTE BOX ON THE 102 MINER.

EMPLOYEE TURNED TO TURN BOLT MACHINE ON: HIS KNEE POPPED. TORN LIGAMENT.

OPERATING MINER LOADING COAL WHEN A BIT LUG CAME OFF MINER AND ROLLED OVER TOP OF MINER STRIKING OPERATOR ON RIGHT KNEE.

SLIPPED AND FELL ON STEPS.

LETTING COME-A-LONG OFF ON BELTLINE HANDLE SLID OUT & HIT THUMB

PULLING CABLE FOR POWER CENTER

HAULING SUPPLIES IN MINE, HIT HOLE AND JARRED HIS NECK.

UNINTENTIONAL ROOF FALL-4TH RIGHT OFF #1 MAIN 11 BREAKS #2 ENTRY-FILL FOR 2 BREAKS.

WALKING DOWN HILL, SLIPPED AND FELL TAIL BONE HIT TOOL BOX INJ TAIL BONE

MINER GOT STUCK. HE WAS PUTTING CRIB BLOCK UNDER MINER; FINGER GOT CAUGHT BETWEEN CRIB BLOCKING.

HORSE BACK A FACE SECTION 002

RUNNING MINER AND 4 TO 5 INCHES OF CAP COAL FELL CUTTING RIGHT HAND.

RESETTING A BREAKER ON 506 AND THE CAT HEAD SHORTED OUT. BURNING FACE AND RIGHT WRIST.

BUSTING A ROCK OFF BELT LINE WITH A HAMMER. MASHED RIGHT INDEX FINGER.

DRILLING HOLE T O PUT UP BOLTS PIECE OF ROCK FELL HITTING HAND BRUISED LEFT HAND

EMPLOYEE ADN THREE OTHER MEN WERE LOADING A BELT BOLT. LONG X 36" WIDE. HE WENT TO A DR. ON THE 28 COMPLAINING OF BACK PAIN. NO COMPLAINTS ON JOB SITE.

THE POWER CENTER WAS BEING MOVED. EE WAS PULLING THE MINER CABLE AND PULLED A MUSCLE IN HIS BACK.

HE WAS HELPING PUT RIPPER HEAD CHAIN ON WHEN MINER OPERATOR HIT THE SWITCH TO START HEAD BY MISTAKE

DRILLING HOLES WITH ROOF BOLTER,PIECE OF DRAW ROCK FELL HITTING HEAD & BACK.ALSO INJURING LEFT KNEE.

EMPL LETTING OFF JACK HOLDING SOLID STRUCTURE.JACK SLIPPED AND EMPL TRIED TO CATCH IT RESULTING IN LEFT HAND FX.

ROOF FALL FOUND;28'LONG X 26'WIDE X 8'HIGH.#1BELT,#3 ENTRY 21 BRKS FROM OUTSIDE.

EMPLOYEE WAS INSTALLING ROOF BOLTS. HE HAD HIS LEFT HAND ON THE ROOF BOLT. HE SHOULD HAVE HIT THE LEVER TO PUSH THE ROOF BOLT UP INTO THE HOLE. IN ERROR HE HIT THE LEVER THAT TURNS THE ROOF BO LT. ROOF BOLT TWISTED HIS GLOVE WITH HIS HAND IN IT. HE WAS UNABLE TO TURN LOOSE OF THE ROOF BOLT. BRAKE WRIST IN TWO PLACES AND BROKE FOUR FINGERS.

EMPLOYEE WAS MOVING MINER CABLE SHUTTLE CAR OPERATOR RAN SHUTTLE CAR INTO HIM AND CAUGHT HIM BETWEEN THE SHUTTLE CAR AND THE RIB OF COAL.

ROOF FALL FOUND.30'LONG X 20'WIDE X 6'HIGH.#5 ENTRY INTERSECTION WITH #1 LEFT ROOM.

MINING MACHINE LOST AIR, EMPLOYEE WAS WALKING OUT TO SEE WHY, MINER OPERATOR BACKED MINING MACHINE UP AND CAUGHT EMPLOYEE BETWEEN RIB OF COAL AND MINING MACHINE.

SHARPING COAL D RILL BIT & SMALL PIECE OF METAL FLEW IN RIGHT EYE.

EMPLOYEE HAD FI5LED HEATER WITH DIESEL FUEL AND WHEN HE LIT THE HEATER THE FUMES EXPLODED IN HIS FACE.

IN AN AREA THAT3HAD ALREADY BEEN BOLTED A SECTION OF ROCK 3 FT HIGH BY 25 FT WIDE FELL ROCK FALL HAPPENED AT #3 OUTBY LAST INTERSECTION 1ST BREAK UNDER SPAD #43

EMPLOYEE WAS IN8TALLING ROOF BOLTS WITH A 300 GALIS ROOF BOLTING MACHINE AFTER BOLT WAS INSTALLED A LARGE ROCK THAT THE ROOF BOLT HAD BEEN INSTALLED IN FELL AND CAUGHT THE EMPLOYEES HEAD BETWE EN THE ROCK AND3THE DRILL HEAD OF THE ROOF BOLTING MACHINE

EMPLOYEE WAS TR3MMING (BACKING UP) 506 CRAWLER OUT OF A CUT OF COAL TO ANOTHER CUT OF COAL. THE TAIL PIECE OF THE 506 SLID AROUND AND CAUGHT THE EMPLOYEE BETWEEN THE 506 AND A RIB OF COAL.

EMPLOYEE WAS DR3LLING HOLES IN ROOF FOR ROOF BOLTS. EMPLOYEE HAD ONE HAND ON THE STEEL TO GUIDE THE STEEL AND KEEP IT STRAIGHT . WHEN HE TURNED THE DRILL ON HIS GLOVE STUCK TO THE STEEL AND TW ISTED HIS HAND 5ROUND THE STEEL.

EMPL INSTALLING3ROOFBOLTS.WHEN DRILL STEEL WENT THRU ROCK ROCK FELL ONTO BOLTING MACHINE AND ROCK BROKE PIECE OF ROCK HIT EMPL ON SHOULDER.