Cada lesión y muerte que la MSHA tiene registrada. Filtra por estado, año, sector, clasificación, experiencia o cualquier palabra clave de la narrativa del investigador.
Envíame un correo cuando un nuevo incidente coincida con estos filtros. Un correo de confirmación; cancela la suscripción cuando quieras.
A piece of rock bounced off from drill boom and struck employee on the upper lip. 3 sutures required.
Employee was hanging a curtain and turned around and hit his back on a nail sticking down from a roof bolt plate and cut his back. 3 Sutures required.
Found an unintentional fall approximately 20 breaks inby #1 Switch on Doty Mains.
Employee was holding a wrench when another employee accidentally hit his arm with a crib/wooden block and cut his arm. Sutures required.
Employee was dipping water and bending over and strained his back. He continued to work at his regular job and then started missing work on 8/30/2014 due to his back not getting any better.
A PICI contract employee was working on the No. 29 Belt and slipped in the mud and twisted his left knee.
Found an unintentional roof fall in the #3 Entry, break #8, of the #26 Beltline.
Found an unintentional roof fall in the #2 entry of the #3 left bleeder panel.
Employee was cutting on a belt guard with a utility knife and cut his right thigh. 11 sutures required.
Employee was helping tighten the low structure when a crib block flew out and struck him on the left shin. Has been diagnosed with a fracture.
Found an unintentional roof fall in the #4 Track Entry 3 breaks inby the #4 Track Switch. Fall was approximately 20' wide by 30' long and 4-5' thick.
Employee was standing beside the roof bolter when a piece of rock fell and struck him on the head and face. Sutures required.
Employee was standing beside the flat bed truck when another employee was attempting to unload a ram car boom jack. The jack spun around on truck and fell off truck and one end of the jack struck the employees left foot. Fractured foot.
Employee was installing the top rib bolt in the #3 Heading on the 004 MMU and felt something pop in his left shoulder. He started missing work on 6/23/2014 pending the results of an MRI.
Found an unintentional fall on the #3 Belt line (#3 Entry) at break # 20 on the #5 PM Panel.
Employee was observing the continuous miner and a piece of draw rock fell and struck the back of his leg and ankle. Fractured ankle.
While drilling / bolting, a piece of drawrock fell onto his left index finger and fractured his finger.
Employee was pulling feeder cable out of the way and into a break and strained his back.
Employee was dragging an oxygen tank down the slope and he tripped and fell onto his right side/shoulder. He has been diagnosed with a fractured rib.
While moving a belt rail, the rail caught the skin between the thumb and index finger and cut him, 3 sutures required.
Employee was getting a stuck rock out of a belt-drive chute, as he had a hold of the rock, it dropped down and caught his left 4th and 5th digit fingers between the rock and the belt scraper bracket and cut both fingers. Sutures were required.
PICI Contract employee strained his lower back while helping hang the miner cable. He was lifting cable with his left shoulder and slipped on a rock and the cable fell on him.
Had an unintentional roof all in the #3 Heading between breaks # 13 to 14 on the 4th Left panel off of Pratt Fork Submains.
PICI Contract employee strained his back while shoveling the lolo structure.
While helping make a belt splice he was moving the knocker his finger was accidentally hit with a hammer by another employee.
Employee was lifting miner cable and waterline and hanging it to the top and strained his back and shoulders.
Found an unintentional roof fall at Break #61, #6 Heading, parallel with the #6 Beltline. The fall did not affect ventilation or affect the escapeways. The other entries through the area were common to this fall area and were travelable.
Employee was picking up a main pump for a roof bolter and the motor shaft cut his left hand between the thumb and index finger. 5 sutures were required.
Found an unintentional roof fall in Break #4 from #3 Heading to #4 Heading in the 1st Left off of Right Shell Submains. Dimensions of fall are approximately 60' long by 20' wide by 6' to 8' thick.
Employee was unloading timbers from a scoop bucket and strained himself in the groin area. Started missing work on 3/5/2014 due to swelling and complications that will require surgery.
A portion of a coal rib was being removed with a jack hammer for the purpose of correcting an issued close clearance citation. The injured employee was removing the loose coal away from the rib when a rock brow fell onto him.
Employee was using a steel rail to push the low structure over and the rail flipped up and struck his jaw and head. He has been diagnosed with a fractured jaw and will require surgery. Started missing work on 2-13-14.
Employee was unloading timbers from a scoop bucket and 2 of them were frozen together and he strained his groin while trying to pull them out of the bucket. He has been diagnosed with an inguinal hernia which will require surgery. He started missing work on Feb. 12, 2014.
Employee was cutting and squaring up the end of a piece of belt and his knife slipped and cut him on the right leg...4 sutures required
An unintentional Roof Fall occurred at break #6 of the # 33 Beltline. Fall dimensions are 35' long x 35' wide x 8.5' thick
EE was drilling a hole in the top and a loose piece of scale fell and hit his left hand. Fractured the index carpal bone. He started missing work on 1-9-2014.
While bolting the ribs, EE got right 4th finger tip in the slide/hinge on boom and cut and bruised finger.
Employee was operating shuttle car and as he was turning his coat sleeve caught the rib and it pulled his arm between car and the rib and bruised his arm in which medical personnel later put a cast on it to help protect the muscle and tendons from future damage.
Employee was using a utility knife to trim the edges of a belt splice and slipped and cut his leg. 3 sutures were required.
Employee was doing rehab bolting work outby and a piece of drawrock fell from the top and struck his hand and fractured his left index finger. Diagnosed with a small non-displaced fracture.
Using the hand wrench to remove a tight bolt. The bolt was located in a confined area of the machine and when technician pulled the wrench to remove the bolt his left shoulder made a snapping noise and started hurting. The pain increased that evening in to the next day.
Employee was observing a crew setting roof support beams while his hand was lying on the continuous miner and an employee flipped a beam over and it struck his left 5th finger. Diagnosed with a fractured finger.
Employee was loading crib blocks into the scoop bucket and a crib block rolled back and struck him on the right ankle. Diagnosed with a hairline fracture in his ankle.
Employee was installing a belt on the mine fan and caught his right index finger and middle finger between the pulley and belt and fractured his right index finger and bruised his right middle finger. No Lost time.
Found an unintentional roof fall in break #1 to # 3 on the Calvary 80 Mains in the # 7 entry. Fall dimensions are 40' long by 20' wide by 7 ' thick.
Found an unintentional roof fall between breaks #26 and 27 on the Leslie Perry Mains in the #6 entry. Fall dimensions are 80' long by 20' wide by 7' thick.
Found an unintentional roof fall on the # 8 Belt(Right Fork Mains) between breaks # 24 and 25. Fall dimensions are 40' long by 20' wide by 7' thick.
Found an unintentional roof fall between the # 3 and # 4 entries on the Leslie Perry Mains at break #28. Fall dimensions are 60' long by 20' wide by 7' thick.
Found an unintentional roof fall from break #6 thru 7 on the Calvary 80 Mains in the #1 entry. Fall dimensions are 80' long by 20' wide by 8' thick.
Found an unintentional roof fall at break #5 on the Calvary 80 Mains in the #2 entry. Fall dimensions are 20' long by 20' wide by 8' thick.