Search the record

Backing over a berm while dumping

Hand was caught between pry bar and motor

Getting out of work truck and stepped on a rock, twisting leg

Dumping the truck when the load shifted to the back causing truck to roll over.

Cutting little finger on left hand. Shutting cab door on drill.

Bar came loose striking employee in the right leg.

Miner got over heated loading shot

Employee slipped coming down the steps of the water truck. This caused EE to land on the right leg. Broke a bone in the right leg.

Employee was using a pry bar on the screen deck motor when the bar slipped hitting EE in the face.

Slip and fall from truck ladder

Knife slipped cutting knee. Had to have stitches in knee cap

Stepped out of cab to get off of machine that EE was measuring. Turned to position self to step down backwards & grab grab-iron. This is the motion that tweaked EE's back. EE was in the parking lot not in the mine itself. EE has prior back issues from past injuries.

Employee was moving a shaft, when it slipped from hand. Trying to catch with the other hand and mashed finger on hard surface.

Back dragging the ramp with the loader. Loader came to a sudden stop causing miner to hit head on the side window.

Employee was going down 3 steps from a trailer after a rain. EE's boots were muddy and EE slipped and fractured bones in left ankle.

Loading boulders into employees truck, rocking the truck and hurting their back, mid back pain.

Holding onto the door frame when the second employee shut the door and cut EE's finger.

Was sitting in truck while being loaded and struck head on the steering wheel.

Twisted knee while carrying a box of explosives

Normal work day.

Taking brace off of plant, bolt was stuck and the brace smashed left hand

Employee said the Haul truck seat bottomed out going over a bump. The office was notified of the injury on 4/23/2018.

Splicing a belt on conveyor when the clamp slipped and cut left hand

Changing drill steel on drill.

Replacing cylinder on loader. Strap on cylinder slipped mashing hand between cylinder and loader frame.

Miner slipped on a rock pile while catching a sample. This caused a pain in the back.

Was closing the property gate at the entrance and the gate swung striking the employee in the face.

Employee strained back during plant set up.

Employee was grabbing a spade from the dozer operator and didn't keep mind on task. The spade stuck his lower lip and had to have 2 stitches. Returned to work with no lost time.

Miner was replacing a belt on a conveyor when his finger was pinched. Miner then went to hospital and had his finger stitched and returned to work 9-15-2014 with no restrictions.

Replacing belt on lime bin and got some dirt in his eye.

This is an accident that happened on July 8, 2016 and didn't become reportable until 8/24/2016. ***Per MM this accident occurred on 7/8/2014 determined by workers comp conference***

Employee was using a pry bar to pry a tire off a rim.

Miner was getting out of the Terex truck and missed the bottom step causing a sore back and leg.

Miner went against training and stuck head in pinch point between counterweight and frame of excavator while installing counterweight.

Removing a bolt with air gun, bolt spun in the other hand causing the injury.

Employee was working in the hopper of the breaker when the skid loader approached with a drag attachment on the front, the attachment dropped off and struck him.

Employee was getting into his truck when he slipped and hit his ribs on the hand rail.

Miner twisted his right knee while going to his truck. Icy patch where he was walking.

While using a die grinder, the grinding disk broke shooting a piece of the grinding disk into the employees arm.

Miner dropped an electric drill on his hand Thursday 5/24/2012. Results of his injury was a break to his hand. He did not tell his supervisor or seek treatment until he returned to work on 5/25/2012. Office was notified on 5/29/2012 that he will be off work until the hand is healed.

Employee was moving explosives from magazine to pickup and slipped on condensation from the humidity causing pain in lower back and leg. Did not go to Dr. until 7/18; doctor released him to work and recommended physical therapy. Physical therapist recommended he be taken off work; first missed day was 7/21. Will be off work until follow up appointment on 7/28.

Employee suffered heat exhaustion during work. He missed work starting 7/1/2011. He was released back to work on 7/8/2011.

Employee rolled a rock off haul road to remove from travel area, strained a muscle, did not seek treatment at that time. That night he went to the dr. for pain & was released with instructions to use ice and Tylenol as needed. He went to the dr. night of 6/21, referred to Des Moines for further treatment, diagnosed torn bicep muscle 6/22 first missed day Scheduled for surgery 6/28

Employee was climbing out of 6 wheel articulated truck and slipped off of the step causing a ligament sprain in his right knee. Did not report to supervisor until late that day and it was reported to the office on 4/26/2011. Employee went to the doctor on 4/26 and was taken off work for an estimated 2 weeks and is thought to be released 5/9/2011.

Truck driver was helping excavator operator remove a rock from tracks of excavator.

Employee began missing 1/24/2011 for surgery on left knee. On November 8, 2010 employee twisted knee, but did not seek treatment at that time. This is the first lost time with this injury. Has not been released for work since surgery.

Loader was backing away from pile. While he was preparing to turn and move forward, a pickup drove in front of him. Person in pickup was taken to hospital for back pain and released. Missed 3 days of work, released with no restrictions.

Employee scooping snow, twisted and hurt left knee. Went to doc 1/8/10, no treatment. On 1/21/10 he went in for physical therapy. On 1/27/10 he went in for surgery. He missed part of day 1/27/10, and is expected to be off until 2/1/10.

Employee was loading scrap iron into a loader bucket, felt pain in abdomen. Doctor determined it was just a strain and released him back to work on the 26th.