Mining Incidents

Tyrone Quarry Metal/Non-Metal

Tyrone, Fayette Condado, GA  ·  Activa
ID de mina MSHA: 0900306

Seguir esta mina

Avísenme cuando se presente un nuevo incidente de la MSHA en Tyrone Quarry.

Muertes
0
Incidentes totales
13
Años en registro
2000–2021
Último incidente
May 2021
Historial de cumplimiento
Citaciones de MSHA desde 2000
96
citaciones
18
significativas y sustanciales
$15,753
multas propuestas
$14,717
pagado a la fecha
Fuente: datos de violaciones de MSHA, actualizados semanalmente.
Tasas de seguridad trimestrales
Citaciones por millón de horas trabajadas, según lo reportado a MSHA
Trimestre Horas trabajadas Citaciones S&S Por 1M hrs
2025 Q4 8,023 0 0 0.0
2025 Q1 694 1 0 1440.9
2024 Q4 10,843 0 0 0.0
2024 Q3 10,536 4 1 379.7
2024 Q1 3,131 0 0 0.0
2023 Q4 6,682 0 0 0.0
2023 Q2 725 0 0 0.0
2023 Q1 693 2 1 2886.0
Los trimestres con menos de 100,000 horas reportadas aparecen atenuados: muy pocas horas para una tasa estable.
No se registran muertes en esta mina.

Incidentes reportables

13 en archivo

2021 · 1 incidente

5 de mayo de 2021 GA · Metal/No metálico Pesador, Encargado de báscula RESBALÓN O CAÍDA DE PERSONA
Martin Marietta Materials Inc · Sobreesfuerzo, no clasificado en otra parte

EE clocked in and was walking to EE's vehicle from the scale house. EE cut the wedge between the sidewalk and parking lot through the grass to EE's car. EE slipped on the wet grass injuring ankle.

2019 · 1 incidente

5 de noviembre de 2019 GA · Metal/No metálico Conductor de camión de acarreo/fuera de carretera/carbón/mineral/mina/cantera/roca/llanta neumática, Conductor de camión de transporte MANEJO DE MATERIALES
Martin Marietta Materials Inc · Golpeado contra un objeto fijo

Employee was performing maintenance on the secondary crusher and received a laceration to the left thumb. Employee received 2 stitches as a result of the laceration.

2016 · 1 incidente

13 de abril de 2016 GA · Metal/No metálico Capataz de exterior, Cabo RESBALÓN O CAÍDA DE PERSONA
Martin Marietta Materials Inc · Caída por escaleras

Ee was walking down the stairs from a conveyor when EE stepped on the edge of the second to last step, lost balance, and fell back on left wrist. EE originally did not want to go to the dr, but continued to have pain and visited dr on 4/18. EE was diagnosed with a fractured left wrist.

2008 · 1 incidente

14 de febrero de 2008 GA · Metal/No metálico Operador de bulldozer, Operador universal, Operador de equipo pesado, Ingeniero operador OTRO
Florida Rock Industries Inc · NEC (no clasificado en otra parte)

Employee was loading shot and had a non fatal heart attack.

2007 · 1 incidente

18 de julio de 2007 GA · Metal/No metálico Operador de perforadora MAQUINARIA
Florida Rock Industries Inc · Atrapado en, bajo o entre, no clasificado en otra parte

While using chain wrench, breaking loose backhead from hammer, he felt slight pinch and pushed wrench in wrong direction to release pressure.

2006 · 3 incidentes

20 de octubre de 2006 GA · Metal/No metálico Encargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campo HERRAMIENTAS MANUALES (SIN MOTOR)
Florida Rock Industries Inc · Golpeado contra un objeto fijo

Employee was swinging a sledgehammer to assist in the removal of a crusher bowl liner, when his elbow struck the edge of the spider rim causing a laceration.

9 de agosto de 2006 GA · Metal/No metálico Operador de perforadora RESBALÓN O CAÍDA DE PERSONA
Florida Rock Industries Inc · Caída desde una máquina

In process of replacing blown hydraulic hose, he fell off tower deck from approximately 4 feet striking a wrench laying on ground and injured his left arm.

1 de abril de 2006 GA · Metal/No metálico Encargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campo RESBALÓN O CAÍDA DE PERSONA
Florida Rock Industries Inc · Sobreesfuerzo, no clasificado en otra parte

EMPLOYEE WAS CARRYING A COME-ALONG UP THE CATWALK TO CHANGE OUT THE DISCHARGE LIP ON THE 5 ?' CRUSHER AND ROLLED HIS FOOT ON SOME LOOSE MATERIAL.

2004 · 2 incidentes

15 de septiembre de 2004 GA · Metal/No metálico Encargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campo HERRAMIENTAS MANUALES (SIN MOTOR)
Florida Rock Industries Inc · Golpeado por objeto proyectado

Employee was attempting to cut the band off a pallet of screens with tin snips. The band was very tight. When the cut went through, the screens released with force and struck him in the left arm requiring six stitches.

2003 · 1 incidente

20 de agosto de 2003 GA · Metal/No metálico Almacenista, Ensacador, Paletizador/Apilador, Encargado de almacén, Empacador, Fabricante, Operador de planta de lavado MANEJO DE MATERIALES
Florida Rock Industries Inc · Golpeado contra un objeto fijo

EE WAS REMOVING ROCK WHICH HAD SPILLED ONTO THE WALKWAY FROM THE SCREEN AREA. TO PERFORM THIS TASK, HE WAS IN A "THROWING" MOTION. HE DID NOT NOTICE WHERE HIS HANDS WER IN RELATION TO THE HAND RAIL. HE WAS WEARING GLOVES AT THE TIME OF THE INJURY.

2001 · 1 incidente

26 de junio de 2001 GA · Metal/No metálico Encargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campo MANEJO DE MATERIALES
Florida Rock Industries Inc · Sobreesfuerzo, no clasificado en otra parte

EE WAS CONDUCTING A PRE-SHIFT INSPECTION ON THE WATER TRUCK. HE LIFTED THE HOOD ON THE TRUCK ANDADDED HYDRAULIC OIL TO THE TRUCK. HE HAD TO LEANOVER THE AIR FILTER TO DO THIS TASK. HE SAID HIS BACK BEGAN TO HURT.

2000 · 1 incidente

14 de septiembre de 2000 GA · Metal/No metálico Motorista, Operario de motor, Ayudante, Cambiavía, Operador de locomotora HERRAMIENTAS MANUALES (SIN MOTOR)
Florida Rock Industries Inc · Golpeado por... no clasificado en otra parte

EMPLOYEE WAS PUNCHING A HOLE IN A CONVEYER BELT WITH A BELT KNIFE. HE WAS PULLING THE KNIFE TOWARD HIMSELF. THE EMPLOYEE WAS KNEALING AT THE TIME, THE KNIFE CUT HIS LEFT LEG A FEW INCHES ABOVE THE KNEE. HE SHOULD HAVE BEEN USING A BELT PUNCH FOR THIS TASK AND CUTTING AWAY FROM HIMSELF.