EE clocked in and was walking to EE's vehicle from the scale house. EE cut the wedge between the sidewalk and parking lot through the grass to EE's car. EE slipped on the wet grass injuring ankle.
Tyrone Quarry: 96 MSHA citations Metal/Non-Metal
Tyrone Quarry has $16K in proposed MSHA penalties and $516 outstanding across 1 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at Tyrone Quarry.
- Fatalities
- 0
- Total incidents
- 35
- Years on record
- 1983–2021
- Latest incident
- May 2021
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.Tyrone Quarry has $16K in proposed MSHA penalties and $516 outstanding across 1 contested dockets.
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.ⓘ
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.- Settled 4 · 100%
ⓘ
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.ⓘ
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.| Docket | Decision | Judge | Year | Proposed / upheld |
|---|---|---|---|---|
| SE 2007-78M | Settlement | Bulluck | 2008 | $813 → $388 |
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Metal and nonmetal contaminants (personal samples)
ⓘ
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.
Last sampled: 2026-03-11
ⓘ
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.- Quartz, respirable, >1% Qtz7
- Respirable dust, <.1mg7
- Unlisted Particulate, respirable, <1% Qtz1
Show the individual readings (15)
| Date | Contaminant | Concentration | Limit | Conc / limit | Occupation |
|---|---|---|---|---|---|
| 2026-03-11 | Quartz, respirable, >1% Qtz | 0.19 | Crusher Oper/Worker | ||
| 2026-03-11 | Quartz, respirable, >1% Qtz | 0.24 | Front-end Loader Operator | ||
| 2026-03-11 | Respirable dust, <.1mg | 0 | Building Repair/Maint. | ||
| 2026-03-11 | Respirable dust, <.1mg | 0 | Truck Driver | ||
| 2015-01-06 | Unlisted Particulate, respirable, <1% Qtz | 0.12 | Front-end Loader Operator | ||
| 2015-01-06 | Quartz, respirable, >1% Qtz | 0.23 | 1.62 | 0.14 | Utility Man |
| 2009-10-22 | Respirable dust, <.1mg | 0 | Crusher Oper/Worker | ||
| 2009-10-22 | Respirable dust, <.1mg | 0 | Truck Driver | ||
| 2009-10-22 | Quartz, respirable, >1% Qtz | 0.14 | 0.5 | 0.28 | Front-end Loader Operator |
| 2009-04-15 | Quartz, respirable, >1% Qtz | 0.16 | 0.9 | 0.18 | Jackhammer Operator |
| 2009-04-15 | Respirable dust, <.1mg | 0 | Mechanic | ||
| 2009-04-15 | Respirable dust, <.1mg | 0 | Truck Driver | ||
| 2004-07-28 | Quartz, respirable, >1% Qtz | 0.36 | 1.57 | 0.23 | Mechanic |
| 2004-07-28 | Quartz, respirable, >1% Qtz | 0.31 | 0.39 | 0.79 | Lab Technician |
| 2001-12-11 | Respirable dust, <.1mg | 0 | Crusher Oper/Worker |
Tyrone Quarry recorded 0.00 reportable injury cases per 100 full-time workers in 2025.
ⓘ
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.| Year | total case rate | days-away | fatal |
|---|---|---|---|
| 2025 * | 0.00 | 0.00 | 0.000 |
| 2024 * | 0.00 | 0.00 | 0.000 |
| 2023 * | 0.00 | 0.00 | 0.000 |
| 2022 * | 0.00 | 0.00 | 0.000 |
| 2021 * | 5.28 | 5.28 | 0.000 |
| 2020 * | 0.00 | 0.00 | 0.000 |
| 2019 * | 4.42 | 0.00 | 0.000 |
| 2018 * | 0.00 | 0.00 | 0.000 |
- Dixie Lime & Stone Company 1950 to 1979
- Florida Rock Industries Inc 1979 to 2008
- Martin Marietta Materials Inc 2008 to present
| Year | Employees |
|---|---|
| 2026 | 17 |
| 2025 | 19 |
| 2024 | 19 |
| 2023 | 19 |
| 2022 | 17 |
| 2021 | 17 |
| 2020 | 16 |
| 2019 | 19 |
| 2018 | 16 |
| 2017 | 16 |
| 2016 | 14 |
| 2015 | 11 |
| 2014 | 11 |
| 2013 | 11 |
| 2012 | 11 |
| 2011 | 12 |
| 2010 | 12 |
| 2009 | 14 |
| 2008 | 17 |
| 2007 | 20 |
| 2006 | 21 |
| 2005 | 20 |
| 2004 | 20 |
| 2003 | 17 |
| 2002 | 21 |
| 2001 | 25 |
| 2000 | 26 |
Tyrone Quarry sits in Fayette County, Georgia, where the Census mining category is 0.0% of county employment.
ⓘ
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.ⓘ
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2026 Q2 | 9,086 | 0 | 0 | 0.0 |
| 2026 Q1 | 8,522 | 0 | 0 | 0.0 |
| 2025 Q4 | 8,023 | 0 | 0 | 0.0 |
| 2025 Q3 | 7,911 | 0 | 0 | 0.0 |
| 2025 Q2 | 10,818 | 0 | 0 | 0.0 |
| 2025 Q1 | 11,571 | 1 | 0 | 86.4 |
| 2024 Q4 | 10,843 | 0 | 0 | 0.0 |
| 2024 Q3 | 11,209 | 4 | 1 | 356.9 |
Show 98 earlier quarters Hide earlier quarters
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2024 Q2 | 10,897 | 0 | 0 | 0.0 |
| 2024 Q1 | 8,946 | 0 | 0 | 0.0 |
| 2023 Q4 | 10,280 | 0 | 0 | 0.0 |
| 2023 Q3 | 10,819 | 2 | 0 | 184.9 |
| 2023 Q2 | 12,090 | 0 | 0 | 0.0 |
| 2023 Q1 | 11,543 | 1 | 1 | 86.6 |
| 2022 Q4 | 10,761 | 0 | 0 | 0.0 |
| 2022 Q3 | 13,277 | 2 | 0 | 150.6 |
| 2022 Q2 | 10,405 | 0 | 0 | 0.0 |
| 2022 Q1 | 7,652 | 0 | 0 | 0.0 |
| 2021 Q4 | 9,765 | 1 | 0 | 102.4 |
| 2021 Q3 | 9,531 | 1 | 0 | 104.9 |
| 2021 Q2 | 9,690 | 0 | 0 | 0.0 |
| 2021 Q1 | 8,910 | 1 | 0 | 112.2 |
| 2020 Q4 | 9,264 | 0 | 0 | 0.0 |
| 2020 Q3 | 8,768 | 0 | 0 | 0.0 |
| 2020 Q2 | 10,786 | 0 | 0 | 0.0 |
| 2020 Q1 | 9,733 | 1 | 0 | 102.7 |
| 2019 Q4 | 12,254 | 0 | 0 | 0.0 |
| 2019 Q3 | 11,312 | 0 | 0 | 0.0 |
| 2019 Q2 | 11,247 | 0 | 0 | 0.0 |
| 2019 Q1 | 10,396 | 0 | 0 | 0.0 |
| 2018 Q4 | 9,979 | 0 | 0 | 0.0 |
| 2018 Q3 | 10,009 | 0 | 0 | 0.0 |
| 2018 Q2 | 10,816 | 0 | 0 | 0.0 |
| 2018 Q1 | 9,966 | 0 | 0 | 0.0 |
| 2017 Q4 | 9,650 | 0 | 0 | 0.0 |
| 2017 Q3 | 8,914 | 0 | 0 | 0.0 |
| 2017 Q2 | 9,637 | 0 | 0 | 0.0 |
| 2017 Q1 | 9,347 | 0 | 0 | 0.0 |
| 2016 Q4 | 9,728 | 0 | 0 | 0.0 |
| 2016 Q3 | 11,281 | 0 | 0 | 0.0 |
| 2016 Q2 | 10,330 | 0 | 0 | 0.0 |
| 2016 Q1 | 9,202 | 0 | 0 | 0.0 |
| 2015 Q4 | 10,294 | 2 | 0 | 194.3 |
| 2015 Q3 | 9,857 | 0 | 0 | 0.0 |
| 2015 Q2 | 9,128 | 3 | 1 | 328.7 |
| 2015 Q1 | 7,695 | 1 | 0 | 130.0 |
| 2014 Q4 | 8,786 | 0 | 0 | 0.0 |
| 2014 Q3 | 7,486 | 1 | 1 | 133.6 |
| 2014 Q2 | 6,391 | 0 | 0 | 0.0 |
| 2014 Q1 | 4,487 | 0 | 0 | 0.0 |
| 2013 Q4 | 4,909 | 3 | 0 | 611.1 |
| 2013 Q3 | 5,755 | 1 | 0 | 173.8 |
| 2013 Q2 | 5,505 | 0 | 0 | 0.0 |
| 2013 Q1 | 5,111 | 1 | 0 | 195.7 |
| 2012 Q4 | 5,452 | 0 | 0 | 0.0 |
| 2012 Q3 | 5,537 | 2 | 0 | 361.2 |
| 2012 Q2 | 5,726 | 0 | 0 | 0.0 |
| 2012 Q1 | 4,969 | 0 | 0 | 0.0 |
| 2011 Q4 | 8,123 | 0 | 0 | 0.0 |
| 2011 Q3 | 8,833 | 1 | 0 | 113.2 |
| 2011 Q2 | 8,233 | 0 | 0 | 0.0 |
| 2011 Q1 | 5,806 | 1 | 0 | 172.2 |
| 2010 Q4 | 7,653 | 0 | 0 | 0.0 |
| 2010 Q3 | 8,639 | 0 | 0 | 0.0 |
| 2010 Q2 | 8,629 | 3 | 1 | 347.7 |
| 2010 Q1 | 5,757 | 0 | 0 | 0.0 |
| 2009 Q4 | 5,744 | 2 | 1 | 348.2 |
| 2009 Q3 | 5,902 | 0 | 0 | 0.0 |
| 2009 Q2 | 7,312 | 8 | 2 | 1094.1 |
| 2009 Q1 | 7,154 | 0 | 0 | 0.0 |
| 2008 Q4 | 10,871 | 1 | 0 | 92.0 |
| 2008 Q3 | 10,852 | 1 | 0 | 92.1 |
| 2008 Q2 | 8,364 | 0 | 0 | 0.0 |
| 2008 Q1 | 9,406 | 6 | 0 | 637.9 |
| 2007 Q4 | 9,834 | 0 | 0 | 0.0 |
| 2007 Q3 | 13,501 | 0 | 0 | 0.0 |
| 2007 Q2 | 13,849 | 0 | 0 | 0.0 |
| 2007 Q1 | 15,025 | 1 | 0 | 66.6 |
| 2006 Q4 | 14,388 | 0 | 0 | 0.0 |
| 2006 Q3 | 14,682 | 8 | 3 | 544.9 |
| 2006 Q2 | 15,564 | 0 | 0 | 0.0 |
| 2006 Q1 | 14,620 | 1 | 0 | 68.4 |
| 2005 Q4 | 12,754 | 0 | 0 | 0.0 |
| 2005 Q3 | 13,851 | 0 | 0 | 0.0 |
| 2005 Q2 | 14,498 | 0 | 0 | 0.0 |
| 2005 Q1 | 13,603 | 0 | 0 | 0.0 |
| 2004 Q4 | 12,929 | 0 | 0 | 0.0 |
| 2004 Q3 | 14,384 | 1 | 0 | 69.5 |
| 2004 Q2 | 13,188 | 0 | 0 | 0.0 |
| 2004 Q1 | 13,654 | 2 | 1 | 146.5 |
| 2003 Q4 | 13,417 | 0 | 0 | 0.0 |
| 2003 Q3 | 12,869 | 0 | 0 | 0.0 |
| 2003 Q2 | 11,778 | 1 | 0 | 84.9 |
| 2003 Q1 | 11,574 | 0 | 0 | 0.0 |
| 2002 Q4 | 11,878 | 1 | 0 | 84.2 |
| 2002 Q3 | 11,808 | 0 | 0 | 0.0 |
| 2002 Q2 | 13,395 | 1 | 1 | 74.7 |
| 2002 Q1 | 14,384 | 0 | 0 | 0.0 |
| 2001 Q4 | 14,388 | 1 | 0 | 69.5 |
| 2001 Q3 | 16,887 | 0 | 0 | 0.0 |
| 2001 Q2 | 17,990 | 0 | 0 | 0.0 |
| 2001 Q1 | 17,617 | 3 | 0 | 170.3 |
| 2000 Q4 | 16,287 | 0 | 0 | 0.0 |
| 2000 Q3 | 17,149 | 0 | 0 | 0.0 |
| 2000 Q2 | 16,666 | 0 | 0 | 0.0 |
| 2000 Q1 | 20,769 | 1 | 0 | 48.1 |
Reportable incidents
35 on file2021 · 1 incident
2019 · 1 incident
Employee was performing maintenance on the secondary crusher and received a laceration to the left thumb. Employee received 2 stitches as a result of the laceration.
2016 · 1 incident
Ee was walking down the stairs from a conveyor when EE stepped on the edge of the second to last step, lost balance, and fell back on left wrist. EE originally did not want to go to the dr, but continued to have pain and visited dr on 4/18. EE was diagnosed with a fractured left wrist.
2008 · 1 incident
Employee was loading shot and had a non fatal heart attack.
2007 · 1 incident
While using chain wrench, breaking loose backhead from hammer, he felt slight pinch and pushed wrench in wrong direction to release pressure.
2006 · 3 incidents
Employee was swinging a sledgehammer to assist in the removal of a crusher bowl liner, when his elbow struck the edge of the spider rim causing a laceration.
In process of replacing blown hydraulic hose, he fell off tower deck from approximately 4 feet striking a wrench laying on ground and injured his left arm.
EMPLOYEE WAS CARRYING A COME-ALONG UP THE CATWALK TO CHANGE OUT THE DISCHARGE LIP ON THE 5 ?' CRUSHER AND ROLLED HIS FOOT ON SOME LOOSE MATERIAL.
2004 · 2 incidents
Employee was attempting to cut the band off a pallet of screens with tin snips. The band was very tight. When the cut went through, the screens released with force and struck him in the left arm requiring six stitches.
GETTING OFF A PIECE OF MACHINERY - EE JUMPED, LOST HIS BALANCE AND A ROCK CAUSED A CUT ON HIS HIP.
2003 · 1 incident
EE WAS REMOVING ROCK WHICH HAD SPILLED ONTO THE WALKWAY FROM THE SCREEN AREA. TO PERFORM THIS TASK, HE WAS IN A "THROWING" MOTION. HE DID NOT NOTICE WHERE HIS HANDS WER IN RELATION TO THE HAND RAIL. HE WAS WEARING GLOVES AT THE TIME OF THE INJURY.
2001 · 1 incident
EE WAS CONDUCTING A PRE-SHIFT INSPECTION ON THE WATER TRUCK. HE LIFTED THE HOOD ON THE TRUCK ANDADDED HYDRAULIC OIL TO THE TRUCK. HE HAD TO LEANOVER THE AIR FILTER TO DO THIS TASK. HE SAID HIS BACK BEGAN TO HURT.
2000 · 1 incident
EMPLOYEE WAS PUNCHING A HOLE IN A CONVEYER BELT WITH A BELT KNIFE. HE WAS PULLING THE KNIFE TOWARD HIMSELF. THE EMPLOYEE WAS KNEALING AT THE TIME, THE KNIFE CUT HIS LEFT LEG A FEW INCHES ABOVE THE KNEE. HE SHOULD HAVE BEEN USING A BELT PUNCH FOR THIS TASK AND CUTTING AWAY FROM HIMSELF.
1999 · 3 incidents
LOADED RAIL CARS THAT HAD BEEN POSITIONED FOR PICKUP ROLLED BACK DOWN THE TRACK, STRIKING LOCOMOTIVE CARRYING TWO EMPLOYEES CAUSING ONE TO STRIKE HIS HEAD AGAINST CAB.
WHILE WELDING A LINER TO A CHUTE IT WAS NOTICED THE LINER NEED TO BE REPOSITIONED. THEY DECIDED TO WELD A BLOCK TO BOTTOM OF HUDCO TO AID IN REPOSITIONING. UNKNOWINGLY THEY WELDED THE BLOCK TO OVERLAY. WHEN THEY RELEASED THE LINER THE BLOCK GAVE WAY AND SMASHED HIS LEFT FOOT.
EE WAS CHANGING A BIT. HE STUCK HIS HAND UNDER BIT WRENCH. AT THE SAME TIME HE ACCIDENTALLY MOVED FEED LEVER DOWN, SMASHING HIS LEFT INDEX FINGER & THUMB.
1998 · 1 incident
EE WAS STEPPING DOWN WHEN RING CAUGHT ON SHEAVE GUARD. WEIGHT OF BODY CAUSED RING TO CUT INTO FINGER.
1997 · 3 incidents
TOSSED AROUND IN TRUCK WHILE BEING LOADED W/MATERIAL.
EE FELL OFF TRUCK: LOST HIS FOOTING & FELL: FRACTURED RIGHT WRIST
EMPLOYEE WAS TRYING TO REMOVE IDLER. IDLER FLIPPED OVER CAUSING GASH ON BACKHAND.
1995 · 1 incident
EMPLOYEE WALKING DOWN CATWALK WITH ARM FULL OF TOOLS HE TRIED TO KICK A ROCK OFF THECATWALK WITH RIGHT FOOT HIS RIGHT KNEE LOCKED UP WHEN HE KICKED MEDICAL ASSESSMENT INDICATED SURGERY WHICH W AS PERFORMED ON 04-28-95 RESTRICTED DUTY BEGAN ON 05-01-95
1994 · 1 incident
WHILE SHOVELING IN SURGE TUNNEL EMPLOYEE SLIPPED PINCHING RIGHT 4TH FINGER BETWEEN ROLLER BRACKET AND SHOVEL HANDLE.
1993 · 1 incident
WHILE OPENING A GATE TYPE WATER VALVE, EMPLOYEE FELT HIS RIGHT SHOULDER POP, ALLEGEDLY STRAINING OR PULLING MUSCLE IN RIGHT SHOULDER.
1992 · 1 incident
EE WAS USING A BAR TO LOOSEN MATERIAL BRIDGED IN CHUTE ABOVE 5 CRUSHER MATEIRAL GAVE WAY PINCHING HIS FINGER BETWEEN BAR AND CHUTE RESULTING IN CUT TO FINGER.
1991 · 1 incident
EMPLOYEE WAS HITTING STOPPED UP CHUTE WITH HAMMER IN ORDER TO UNSTOP CHUTE -HAMMER BOUNCED BACK AND STRUCK EMPLOYEE ON LEFT CHEEK,CUTTING AND BURUISING.
1988 · 5 incidents
EMPLOYEE OPENED FILE CABINET DRAWER WITH BOTTOM DRAWER ALREADY OPEN CAUSING CABINET TO TIP OVER, STRIKING EMPLOYEE'S LEFT KNEE JUST ABOVE KNEECAP.
EMPLOYEE WAS CUTTING RETURN ROLLER OUT WHEN TORCH BLEW GREASE ONTO HIS LEFT HAND, CAUSING BURN.
NO NARRATIVE PROVIDED.
EMP ATTEMPTING TO CARRY SAMPLE DOWN THE LADDER ON THE BED OF CONTRACTORS DUMP TRUCK. WHEN TWISTING OVER SIDE RAIL OF THE BED, WITH SAMPLE, TO PLACE HIS FOOT ON THE LADDER, EMP TWISTED HIS LE KNEE
EMP STEPPED INTO BACK OF MECHANICS SERVICE TRUCK TO PUT DOWN A BOTTLE OF OXYGFEN. HE SLIPPED AND FELL, AND TWISTED RIGHT ANKLE
1987 · 3 incidents
DUE TO OPERATOR3AND SUPERVISOR'S INATTENTION IN CRANE OPERATION,THE SNATCH BALL BROKE AND FELL,DISTRACTING EMPLOYEE CAUSING FALL ONTO PLATFORM 7 FEET BELOW. INJURIES INCLUDE RIGHT FOOT,RIGHT S HOULDER,LACERAT3ON TO RIGHT SIDE OF HEAD.
EMPLOYEE SUFFER9D A MINER STROKE AND IS SUSPENED THAT CHRONIC HIGH BLOOD PRESSURE CAUSED THE STROKE.
WHILE EMPLOYEE 4AS DRIVING TRACK PIN BACK INTO TRACKS PIECE OF PIN CHIPPED OFF GOING THROUGH EMPLOYEE'S CLOTHING & LODGING IN LEFT LEGS.
1984 · 1 incident
THE BALLAST IN A LIGHT FIXTURE IN THE SHOP SUPERVISORS\ OFFICE EXPLODED AND CAUGHT THE SURROUNDING WALLS, PAPERS, AND CEILING ON FIRE. THE SHOP OFFICES, STORAGE ROOMS, AND THE TIME CLOCK/BREAK ROOM WAS DESTROYED.
1983 · 1 incident
WHILE FLAGGING TRUCKS SHOVEL GOT INTO UNASUALLY HEAVY MATERIAL CAUSING COUNTERWEIGHT TO RAISE AND FALL QUICKLY CAUSING EMPLOYEE TO LOSE BALANCE AND GO OVER HANDRAIL