While lifting an I beam, when they twisted they felt a sharp pain in the left leg.
D-8 Cloverlick: 1,062 citaciones de la MSHA Coal
D-8 Cloverlick tiene $303K en multas propuestas de MSHA y $111K pendientes en 77 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en D-8 Cloverlick.
- Muertes
- 0
- Incidentes totales
- 51
- Años en registro
- 2010–2018
- Último incidente
- Apr 2018
ⓘ
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.ⓘ
Una orden bajo la Sección 107(a) retira a los mineros de un área cuando un inspector detecta un peligro inminente. Cada orden se levanta una vez corregida la condición, por lo que esto cuenta las órdenes emitidas, no las que están en vigor ahora.D-8 Cloverlick tiene $303K en multas propuestas de MSHA y $111K pendientes en 77 expedientes impugnados.
ⓘ
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.ⓘ
Las proporciones se calculan sobre las citaciones que llevan la codificación de gravedad y negligencia de la MSHA; una pequeña parte de los registros no está codificada.ⓘ
Impugnar una citación ante la Comisión Federal de Revisión de Seguridad y Salud Minera es un derecho legal. Estas cifras presentan los resultados públicos de ese proceso, según el archivo de Violaciones Impugnadas de MSHA.- Conciliadas 534 · 88%
- Quedaron como emitidas 68 · 11%
- Anuladas o retiradas 5 · 1%
ⓘ
Una citación Significativa y Sustancial cuenta como sobreviviente cuando la conciliación o la decisión del juez mantuvo la designación, o cuando la impugnación fue desestimada o quedó en rebeldía y la citación quedó como emitida. Las citaciones anuladas o retiradas, y las conciliaciones que quitaron la designación, cuentan en contra.ⓘ
Una reducción o desestimación ante la Comisión es un resultado legítimo de impugnar una multa propuesta. Las cifras son el monto propuesto y el monto confirmado en la decisión del expediente.| Expediente | Decisión | Juez | Año | Propuesta / confirmada |
|---|---|---|---|---|
| KENT 2017-0220 | Settlement | Simonton | 2017 | $17K → $14K |
| KENT 2018-0206 | Settlement | Simonton | 2018 | $16K → $11K |
| KENT 2011-458 | Withdrawal | Bulluck | 2012 | $15K → $0 |
| KENT 2011-206 | Withdrawal | Bulluck | 2012 | $14K → $0 |
| KENT 2017-0121 | Settlement | Simonton | 2017 | $9K → $8K |
| KENT 2018-0100 | Settlement | Simonton | 2018 | $9K → $7K |
El muestreo de MSHA en D-8 Cloverlick muestra que 99% de 1,368 muestras de polvo respirable de carbón cumplieron el estandar de 1.5 mg/m3.
ⓘ
Una muestra es una medición de cumplimiento en un momento dado, no un historial de exposición individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.Polvo respirable de carbón
ⓘ
Las cifras de polvo respirable de carbón y sílice corresponden a instalaciones de carbón. El cumplimiento del polvo se mide frente a la norma actual de 1.5 mg/m3; se incluyen muestras anteriores a la norma de 2014, por lo que las tasas de cumplimiento son una senal historica aproximada.
Última medición: 2018-06-22, hace 8 años
ⓘ
Las cifras de polvo respirable de carbón y sílice corresponden a instalaciones de carbón. El cumplimiento del polvo se mide frente a la norma actual de 1.5 mg/m3; se incluyen muestras anteriores a la norma de 2014, por lo que las tasas de cumplimiento son una senal historica aproximada.ⓘ
El valor de concentración excesiva (ECV) es el umbral de aplicación por muestra de la propia MSHA, que incorpora la incertidumbre de medición; una muestra por encima de su ECV puede motivar una citación. El conteo cubre solo las muestras a las que MSHA asignó un ECV.- CONTINUOUS MINER OPERATOR529
- ROOF BOLTER (TWIN HEAD) (RETURN SIDE)294
- SHUTTLE CAR OPERATOR (STANDARD SIDE)78
Sílice (cuarzo)
Última medición: 2018-04-23, hace 8 años- CONTINUOUS MINER OPERATOR29
- ROOF BOLTER (TWIN HEAD) (RETURN SIDE)7
Ruido
ⓘ
La proporción cuenta las muestras de ruido cuya dosis medida superó el límite permisible de exposición de 90 dBA. Describe el lugar de trabajo muestreado, no lo que llegó al oído del minero: los programas de conservación de la audición y la protección auditiva usada durante el turno se registran por separado y no se reflejan aquí.
Última medición: 2018-04-16, hace 8 años
ⓘ
La proporción cuenta las muestras de ruido cuya dosis medida superó el límite permisible de exposición de 90 dBA. Describe el lugar de trabajo muestreado, no lo que llegó al oído del minero: los programas de conservación de la audición y la protección auditiva usada durante el turno se registran por separado y no se reflejan aquí.- SHUTTLE CAR OPERATOR (STANDARD SIDE)52
- CONTINUOUS MINER OPERATOR24
- SCOOP CAR OPERATOR24
ⓘ
Una muestra es una medición de cumplimiento en un momento dado, no un historial de exposición individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.ⓘ
Las cifras de polvo respirable de carbón y sílice corresponden a instalaciones de carbón. El cumplimiento del polvo se mide frente a la norma actual de 1.5 mg/m3; se incluyen muestras anteriores a la norma de 2014, por lo que las tasas de cumplimiento son una senal historica aproximada.| Año | dentro de 1.5 mg/m3 | muestras |
|---|---|---|
| 2018 | 100% | 127 |
| 2017 | 100% | 369 |
| 2016 | 100% | 288 |
| 2015 | 94% | 110 |
| 2014 | 100% | 55 |
| 2012 | 100% | 154 |
| 2011 | 95% | 148 |
| 2010 | 96% | 101 |
| 2009 | 88% | 16 |
| Año | sílice prom. (%) | muestras |
|---|---|---|
| 2018 | 3.5 | 6 |
| 2017 | 4.6 | 18 |
| 2016 | 3.4 | 11 |
| 2015 | 4.4 | 8 |
| 2014 | 7.9 | 6 |
| 2012 | 3.0 | 1 |
| 2011 | 10.4 | 7 |
| 2010 | 10.4 | 10 |
| 2009 | 6.4 | 1 |
| Año | sobre el LPE | muestras |
|---|---|---|
| 2018 | 0% | 15 |
| 2017 | 13% | 39 |
| 2016 | 13% | 40 |
| 2015 | 15% | 20 |
| 2014 | 7% | 15 |
| 2012 | 6% | 31 |
| 2011 | 11% | 35 |
| 2010 | 13% | 23 |
D-8 Cloverlick registró 5.15 casos de lesión reportables por cada 100 trabajadores a tiempo completo en 2017.
ⓘ
Esta tasa son los casos de lesión reportables por cada 100 trabajadores a tiempo completo por año, calculada como 200,000 por los casos dividido entre las horas-empleado reportadas por el operador a la MSHA. Los casos son lesiones que la MSHA clasificó en grado 01 a 07; se excluyen los eventos de solo accidente que no lesionaron a nadie, y también las lesiones de contratistas, cuyas horas no corresponden a una sola mina. Las tasas comienzan en el año 2000, cuando inicia el reporte trimestral de empleo, y se omiten por debajo de 20,000 horas en un año.| Año | tasa de casos totales | días perdidos | mortales |
|---|---|---|---|
| 2017 | 5.15 | 4.12 | 0.000 |
| 2016 | 8.73 | 8.73 | 0.000 |
| 2015 | 3.09 | 1.55 | 0.000 |
| 2014 * | 0.00 | 0.00 | 0.000 |
| 2012 | 12.16 | 8.84 | 0.000 |
| 2011 | 7.73 | 7.73 | 0.000 |
| 2010 * | 10.56 | 5.28 | 0.000 |
- Cloverlick Coal Company LLC 2009 a 2012
- North Fork Coal Corporation 2013 a 2013
- Jarisa Inc. 2013 a 2015
- Blackjewel L.L.C. 2015 al presente
ⓘ
La producción de carbón se reporta trimestralmente y va con retraso respecto al periodo actual; los trimestres más recientes pueden estar incompletos.| Año | Empleados | Carbón producido (toneladas) |
|---|---|---|
| 2018 | 77 | 145,188 |
| 2017 | 71 | 420,788 |
| 2016 | 69 | 542,676 |
| 2015 | 76 | 270,340 |
| 2014 | 36 | 182,536 |
| 2013 | 18 | 6,560 |
| 2012 | 82 | 492,045 |
| 2011 | 77 | 426,117 |
| 2010 | 29 | 151,370 |
| 2009 | 15 | 15,440 |
D-8 Cloverlick se ubica en Harlan County, Kentucky, donde la categoría minera del Censo representa el 4.3% del empleo del condado.
ⓘ
Las cifras del condado provienen de la Encuesta sobre la Comunidad Estadounidense de la Oficina del Censo de EE. UU., estimaciones quinquenales agrupadas, por lo que la edición de 2023 abarca de 2019 a 2023. La categoría del Censo es 'minería, explotación de canteras y extracción de petróleo y gas', que es más amplia que la jurisdicción de la MSHA e incluye a trabajadores de petróleo y gas que ninguna mina emplea. Estas cifras describen el condado circundante, no esta mina, y no son un factor en ningún incidente específico.ⓘ
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2018 Q2 | 51,229 | 34 | 7 | 663.7 |
| 2018 Q1 | 50,521 | 18 | 6 | 356.3 |
| 2017 Q4 | 50,521 | 36 | 5 | 712.6 |
| 2017 Q3 | 44,451 | 48 | 9 | 1079.8 |
| 2017 Q2 | 49,494 | 51 | 10 | 1030.4 |
| 2017 Q1 | 49,637 | 104 | 20 | 2095.2 |
| 2016 Q4 | 50,775 | 70 | 7 | 1378.6 |
| 2016 Q3 | 45,988 | 27 | 8 | 587.1 |
Mostrar 27 trimestres anteriores Ocultar trimestres anteriores
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2016 Q2 | 43,214 | 31 | 13 | 717.4 |
| 2016 Q1 | 43,196 | 31 | 6 | 717.7 |
| 2015 Q4 | 45,234 | 63 | 13 | 1392.8 |
| 2015 Q3 | 32,687 | 24 | 6 | 734.2 |
| 2015 Q2 | 21,549 | 16 | 5 | 742.5 |
| 2015 Q1 | 29,963 | 26 | 7 | 867.7 |
| 2014 Q4 | 22,189 | 44 | 8 | 1983.0 |
| 2014 Q3 | 17,937 | 35 | 6 | 1951.3 |
| 2014 Q2 | 20,150 | 26 | 6 | 1290.3 |
| 2014 Q1 | 16,974 | 24 | 8 | 1413.9 |
| 2013 Q4 | 2,007 | 12 | 3 | 5979.1 |
| 2013 Q3 | 3,714 | 15 | 2 | 4038.8 |
| 2013 Q2 | 3,494 | 6 | 0 | 1717.2 |
| 2013 Q1 | 5,281 | 15 | 4 | 2840.4 |
| 2012 Q4 | 48,251 | 30 | 10 | 621.7 |
| 2012 Q3 | 49,497 | 42 | 9 | 848.5 |
| 2012 Q2 | 41,367 | 21 | 2 | 507.7 |
| 2012 Q1 | 41,831 | 6 | 0 | 143.4 |
| 2011 Q4 | 48,661 | 25 | 4 | 513.8 |
| 2011 Q3 | 47,423 | 19 | 2 | 400.6 |
| 2011 Q2 | 48,408 | 15 | 6 | 309.9 |
| 2011 Q1 | 36,647 | 20 | 11 | 545.7 |
| 2010 Q4 | 27,372 | 32 | 12 | 1169.1 |
| 2010 Q3 | 22,195 | 12 | 5 | 540.7 |
| 2010 Q2 | 14,090 | 2 | 0 | 141.9 |
| 2010 Q1 | 12,069 | 9 | 1 | 745.7 |
| 2009 Q4 | 9,247 | 4 | 1 | 432.6 |
Incidentes reportables
51 en archivo2018 · 2 incidentes
EE was moving car anchor & pulling cable off of reel when ee felt sharp pain in lower back. EE was released back to work 1/17/18. EE returned with no restrictions on 3/19/18.
2017 · 5 incidentes
Employee was stepping over a large clevis & felt & heard a popping sound in left leg. Employee has a strain to employee's left calf muscle.
Employee was fitting a door on deck of Fairchild battery scoop deck & door fell off deck landing on left foot behind steel toe.
EE stumbled & fell when ee got off mantrip. EE tried to catch self, felt sharp pain in left wrist, wrist is swollen. EE went to doctor & was given FULL DUTY RETURN TO WORK RELEASE. EE followed up with doctor a week later & was taken off work on 08/08/2017 until evaluated by specialist. EE was diagnosed with a ligament tear in left wrist.
Squaring in the first cut with roof bolter, was getting strap out of tray, strap slipped cutting left forearm. Employee was transported to Whitesburg ARH and received sutures & dermabond to close wound. Employee was released without restrictions to return to next shift.
Employee was in process of installing roof support in #4 entry on 004 section. EE just had got drill steel started in the top. EE engaged the up pressure and rock fell striking left elbow. Causing a cut which at ER was glued but ee followed up with physician who took out the glue and put in 3 sutures and having ee off work.
2016 · 9 incidentes
An unintended fall of the roof on the 003 (retreat mining section) in the #4 entry, inby cross-cut number 20. The fall entrapped the #1 MRS unit inby the fall. 103(k) order was issued & later terminated with the mine returning to production. MRS unit was recovered, NO injuries. Section returned to normal production 8:40 AM on 11/04/16.
Employee was carrying timbers in low height 46"-52" over a distance of 200' over irregular bottom. Setting timbers and building cribs in a bleeder. Employee strained back. Employee did not start loss of time until January 3, 2017, and is off waiting for back surgery.
Employee was coming back from getting bolting supplies and hit head on the mine roof while on the lo trac.
Employee was loading pans for pinner into scoop bucket. Bent over & picked them up when a sharp pain in lower back.
Employee was bolting in the #1 entry, EE was pulling on a roof strap to line it up and felt pain/pop in shoulder. Could not raise arm up without pain afterward.
Employee was dusting travel way & the hose busted on rock duster. EE went to get repairman. EE was waiting on car to dump on feeder & noticed a piece of rock hanging loose on top. EE didn't feel comfortable leaving it, so used a slate bar to pull the piece that was hanging. EE did not anticipate what was coming with it. An 80"x 44"x 10" piece of rock fell on him.
Employee was loading timbers on lotrac, picked up timber and strained left shoulder.
Employee was tramming scoop from #3 to #2. EE went through curtain then held curtain up with right arm. A shuttle car was parked in #2 inby locc with boom sticking out into intersection. EE pinched arm between canopy of scoop and boom of shuttle car.
Employee was putting a fork onto a Lo Trac and was going to slide the fork closer to the adjacent fork which was already in place. The fork was not completely in place on the slide bracket and when EE attempted to move it, the fork fell. The fork landed on the tip of EE's finger and mashed it against the mine floor.
2015 · 3 incidentes
Employees were moving a feeder to the 004 section a piece of draw rock fell landing on ee left hand.
Employee had been to the 004 section looking at conditions outby the section which he had some issues with. He walked up to the section via the power entry (#5), passed the power center and turned left to go toward the feeder. As he did so, his left ear struck a car anchor installed in the mine roof. He had a laceration to his left ear lobe which required stitches.
The area where the roof fall occupied was in a transition zone where the shale roof was turning to sandstone. Supported but it fell above the supplemental support. This fall was on a belt line that had been developed 3 years prior to the fall. The only damage was to the beltline for approx. 30 feet.
2014 · 1 incidente
Area was recognized as bad roof in June. Advancement of the panel was ceased, at that time, and the area was dangered off.
2013 · 5 incidentes
EE has filed a black lung claim with the Kentucky labor Cabinet, Department of Workers Claims. *** There is no accident associated with this claim***
Employee has filed a claim for Black Lung benefits with the U.S. Department of Labor, Office of Worker's Compensation. The Amended Notice of Claim is dated March 27, 2013. *****THERE ARE NO ACCIDENTS ASSOCIATED WITH THIS CLAIM.
Received a hearing loss diagnosis on 12/12/13. Employee was termed on 3/5/13 and is no longer employed with the company. Accident date of 3/5/13 is to accommodate online reporting per MSHA (Denver) instructions.
Received a cumulative trauma diagnosis on 12/12/13. Employee was termed on 3/5/13 and is no longer employed with the company. Accident date of 3/5/13 is to accommodate on line reporting per MSHA (Denver) instructions.
Cumulative Trauma/Arms, hands, Back, Neck, Knees
2012 · 13 incidentes
The EE was helping to change a shuttle car tire. As he and co-worker were prying tire up, the tire jumped off the wheel unit falling onto injured EE's left knee and ankle.
While driving scoop, EE hit a hole or a rock on roadway causing him to be bounced up from the seat then back down straining his lower back.
Cumulative trauma / Repetitive work.
While driving scoop, EE hit a hole in the roadway causing him to be bounced from the seat then back down straining his lower back.
While roof bolting, a piece of draw rock fell and struck employee on the arm at the elbow above his Kevlar sleeve. This resulted in a laceration requiring 16 stitches.
A fellow employee had a rock partially picked up with a slate bar, injured worker bent over to roll rock over with his hands. He then felt a sudden sharp pain in his lower back.
While cleaning off the roof bolter, EE pulled a strap that was hung up. When it came loose , EE felt pain in his left arm. EE cont. to work until 12/12/12, at which time he claimed that the pain was so bad that he could not continue until his injury was repaired. He is awaiting an appointment with dr.
EE said he thought something smelled hot on truck. He said he got out to open the hood, when he pulled on the hood to open he said he felt a sharp pain in his lower back. He said he did not want an ambulance so we took him to the E.R. He was x-rayed but it did not show anything so he was referred to his regular Dr.
Employee had just taken receptacle loose from scoop and was getting down from the top of the scoop to put on charge. When he stepped off the scoop he twisted his left ankle.
Employee was helping arrange soap tanks so that they could be unloaded with a forklift. As he was moving the tote, he felt a sharp pain in his lower back. The employee continued to work until 6/19/12. At this time, the employee was taken off work and remains off work until test can be conducted.
Employee was trying to break a bolt loose in the deck of a diesel scoop. When bolt broke loose, his wrist struck the frame in deck of scoop causing a laceration.
During retreat mining on the 001 MMU, and mining the last lift in #6 pillar, draw rock fell on the head of the CM. This pushed the head of the miner into the gob, to the extent that the miner would not tram on its own. No injuries resulted.
EE was moving loader in the reverse direction and hit the embankment causing an injury to his neck. The EE also lifted or carried (2) 5-gallon containers of oil, straining his neck.
2011 · 8 incidentes
A call was made to the MSHA Hot-Line stating that a roof fall had occurred on the continuous miner on the MMU No. 001-0 Section. This call was made in error. The report is to comply with the part 50 reporting of accidents.
The EE was using a piece of diesel equipment (low trac) The EE had stopped the Eq. and while getting out of Eq. he slipped and fell hitting his left hand against the machine, which resulted on a break to the 3rd finger on his left hand. On 12/6/11 the Dr. determined that minor surgery would be required to repair the break to the EE's finger.
The miner was loading top structure in a trailer in preparation for the next belt set-up. When placing a piece of top structure on the trailer, he felt a sharp pain in his right shoulder.
Employee was setting a timber. He got down on his knees to set the timber. While on his knees, he twisted around and said he felt his knee pop.
EE was hanging a curtain when he lost his footing and fell on his left shoulder. He fell against the rib and was complaining of shoulder pain. EE went to the doctor and he continued to work at his regular job until 10/5/11. He had surgery on 10/5/11.
Employee was loading supplies for the roof bolter. As he was turning around, he lost his balance and fell twisting his back as he fell. He continued to work until 06-06-11 when he went to Pineville Hospital. He then went to see another doctor on 6-7-11. This doctor had him off work until 6-9-2011.
Employee was reaching upwards installing a rib bracket when he felt a sharp pain in his lower back. Employee finished his regular shift. He went to the doctor the next day.
Employee was closing airlock door on roadway behind mantrip with a trailer attached. Mantrip had went through door and the employee started to close the door behind it. The door caught the trailer catching the employees hand between the two. This resulted in stitched to the employees hand.
2010 · 5 incidentes
Employee was walking across the section at a hard pace, when he felt a sharp pain in his lower back.
Employee was moving a channel strap, when it caught his glove causing it to cut his left wrist. (4 stitches)
A small fire was discovered inside the surface maintenance office by security personnel at approx 10:30am. The mine was idle & no employees were present at the time of the fire. The fire was contained to this building only. The local Fire Dept was notified & upon arrival the fire was extinguished in approx 10 min. There were no injuries or fatalities associated with this fire.
Employee was pulling an old piece of miner cable by hand. As the employee pulled the miner cable, he was walking backwards when he backed into a low hanging metal strap which resulted in a laceration to the back of the employee's neck. Laceration required (5) stitches.
EE was pulling cable slack by hand when he felt a sharp pain in his lower back. EE continued to work until 3-15-10 (last shift).