WEIR PLANT: 149 MSHA citations Metal/Non-Metal

Tech got into the back of the service truck to retrieve a hose. While stepping out of the truck, techs foot caught the tailgate of the truck bed and began to fall backwards. Techs hand slipped off the safety handle attached to the service bed and EE continued to fall backwards hitting the ground.

employee was standing between the front end loader access ladder and the front wheel fender checking for oil leaks. Another employee started the loader and the front end loader articulated, pinning the first employee between the ladder and the wheel fender

While working at the water pump area, employee received an insect bite.

Employee stepped out of the manlift basket when EE's right foot rolled under EE causing the ankle to twist.

Starting a water pump when snake surprised the employee causing EE to loose EE's footing hitting EE's right wrist on a nearby gas can.

While swinging sledge hammer, grip slipped, causing thumb on right hand to make contact with chain from chain hoist.

Completed work in the primary crusher hopper, fell when exiting, striking head.

Walking behind scalehouse when they tripped, stumbled and fell. Dislocated left shoulder and fracture on left middle finger.

Cutting a thick piece of rubber with a utility knife and lost EE's grip. Knife slipped cutting the underside of EE's forearm

Conducting plant maintenance activities and became overheated.

While operating a dozer employee was sting multiple times by bees

Lifting oxygen/acetylene bottle (gas cylinder) from rack to the truck and strained their back

While chipping a weld, a piece of slag ricocheted off employee's forehead went behind their safety glasses and struck their left eye.

Employee was placing chain back into toolbox when toolbox lid fell cutting employee on head

Employee was working on the primary, ee foot was over the kick plate on man lift, other employee lifted the basket pinning foot between kick plate and belt

Working on primary crusher, removing belt clamp, belt clamp still under pressure, when the clamp came loose it pulled back knocking the ratchet from employee's right hand, wedging hand between belt clamp and support bar.

Rock hung in pre-crusher, employee putting a chain around stuck rock, another rock shifted, rolling into employee back

EMPLOYEE WAS REPLACING A BELT AT THE CRUSHER AND STRAINED HIS LOWER BACK.

EMPLOYEE WAS GREASING HIS FRONT END LOADER WHEN HE LOST HIS BALANCE AND FELL BACKWARDS HITTING THE LOADER BUCKET. HE RECEIVED A LACERATION NEAR THE ANAL ENTRY AREA REQUIRING STITCHES TO CLOSE THE WOUND.

EMPLOYEE WAS REPLACING A RETAINING BOLT ON A HAUL UNIT THAT HOLDS THE CAB TO THE FRAME. IN THE PROCESS, HE FRACTURED HIS LEFT INDEX FINGER.

EMPLOYEE WAS REMOVING THE CARRIER BEARING/PARKING BRAKE ASSEMBLY FROM UNIT 1580 WHEN IT FELL ON HIS RIGHT ANKLE.

EMPLOYEE CUT HIS LEFT LEG ON A JAGGED PIECE OF METAL WHILE WORKING ON THE SCALPER SCREEN. REPORTABLE DUE TO THE 4 STITCHES TAKEN TO CLOSE THE WOUND.

Employee hit his left elbow climbing out of a hopper. He requested to see a doctor on 01/26/2010, with condition of a contusion and returned to work. The condition did not improve, on 07/09/2010 surgery was completed with employee missing 8 days from work. He returned to work on 07/22/2010.

Employee slipped on loose gravel and injured his left knee. Employee continued to work until 09/28/2008 when he was scheduled. He is now on motion restriction. Medical report was not found until 10/06/2008.

While getting on the Cat Truck, his left knee popped, causing knee sprain.

This is an alleged accident. Loader operator stated that he injured his left wrist. He does NOT know the date of injury and he does NOT know the time of injury. He also does NOT know where the accident took place.

Employee was working on the lights on R40, slipped and hit left foot on U-joint.

Employee smashed right ring finger while replacing bering housing at the crusher.

REMOVING WHEEL BRAKE COVER.

WHILE ATTEMPTING TO REMOVE A TAIL PULLY LEFT THUMB PINCHED BETWEEN PULLY & FRAME

WHILE ATTEMPTING TO ADJUST THE FORKLIFT THE LIFTCAME DOWN ON HIS FOOT

DRIVER ERROR - TRUCK ROLLOVER.

EE WAS PUSHING A DRIVE SHAFT OUT & IT FELL & HITTHE RIGHT SIDE OF HIS HEAD Y

EE WAS REPLACING PADDLES IN THE LOG WASHER, METAL SHAVINGS FELL IN HIS LEFT EYE

EE WAS GETTING DOWN FROM #1 SCREEN & HIS HAND SLIPPED RESULTING IN A CUT TO HIS THUMB

WHILE FILLING THE LOADER WITH FUEL, SOME SPLASHED IN HIS EYES.

WHILE WELDING, EMPLOYEE TRIED TO CHANGE POSITIONS AND THE SAFETY CABLE BROKE. EMPLOYEE FELL TO THE GROUND.

WHILE EMPLOYEE WAS WORKING ON CRUSHER,HE FELL AND TWISTED HIS KNEE.

WHILE REPLACING A BELT ON THE CRUSHER, HIS HAND GOT UNDER THE BELT AND REAR PULLEY CAUSING A CONTUSION AND ABRASION TO L HAND.

WHILE MOVING ROCKS IN THE FEED HOPPER, L MIDDLE FINGER WAS SMASHED, RESULTING IN LACERATION REQUIRING SUTURES.

WHILE WALKING AT THE CRUSHER, EE SLIPPED AND INJURED HIS KNEE.

WHILE WORKING ON A SWING CLUTCH ON A DRAGLILNE [R] HAND GOT CAUGHT IN THE GEARS, CAUSING FINGERS ON R HAND TO BE CRUSHED RESULTING IN THE ANPUTATION OF HIS FINGERS.

WHILE EXITING THE CAB OF A LOADER, EMPLOYEE SLIPPED AND FELL TO GROUND.

WHILE CHANGING OXYGEN BOTTLES, FINGER WAS PINCHED AND HE LOST HIS FINGERNAIL.

EE WAS WORKING ON 980C CAT CLOADER ENGINE WHEN THE JACK HOLDING THE LOADER SLIPPED CAUSING THE LOADER TO DROP APPROX. 12 INCHES PINNING HIS RIGHT FOOT BETWEEN THE CHASSIS AND REAR AXLE. THIS R ESULTED IN A BROKEN RIGHT FOOT.

EMPLOYEE WAS WORKING UNDER THE DASHBOARD OF A 1987 CHEVY PICKUP. WHEN REMOVING HIS ARM FROM UNDER THE DASHBOARD HE CUT HIS LOWER FOREARM ON THE LOWER SEAM OF THE METAL PORTION.

EE WAS DIGGING WITH A LOADER WHEN THE LOADER STOPPED SUDDENLY CAUSING HIM TO BUMP HIS STOMACH AREA ON THE LOWER PART OF THE STEERING WHEEL.

EE WAS REFUELING A CATAPILLAR 980C LOADER AND WHEN THE TANK WAS FULL, DIESEL FUEL SPLASHED OUT OF THE FUEL TANK AND INTO THE EE'S EYES, CAUSING IRRITATION OF THE EYES.

EMPLOYEE WAS ATTEMPTING TO DISMOUNT LOADER WHEN HIS FOOT SLIPPED FROM A STEP ON THE ACCESS LADDER, JAMMING HIS ANKLE AND FOOT ON THE LOWER STEP RESULTING IN A SPRAIN OF THE ANKLE.

EE SLIPPED AND FELL OFF LOADER WHILE WORKING IN QUARRY.

OPERATING LOADER, HIT BUMP CAUSING EMPLOYEE TO JAR HIS BACK.

EE DOING REPAIRS ON PRIMARY CRUSHER SLIPPED AND FELL OFF CONVEYOR BELT.

WORKER TIGHTENING "V" BELTS ON CRUSHER WHEN WRENCH SLIPPED CAUSING A FALL.

SLIPPED & FELL OFF CONVEYOR BELT OF PRIMARY CRUSHER.

EE SLIPPED & FELL OFF OF 769 CAT TRUCK.

WIRE SHORTED OUT ON LOADER AS EMPLOYEE WAS REPLACING STARTER BURNED FINGER

EE WORKING ON FEEDER AT PRIMARY CRUSHER & GOT DIRT IN EYES.

FELL OFF OF LADDER ON HAUL TRUCK.

WORKING IN QUARRY, BRUISED HAND IN LOADER DOOR.

UNKNOWN

EE WAS REPLACING A V-BELT ON AN ELECTRIC MOTOR. HAD TO LIFT THE MOTOR WITH A COME-A-LONG, CABLE BROKE, & DROPPED MOTOR BASE ON HIS LEFT FOOT.

HELPING REPLACE SECTION OF BELT ON LONG OVERHEAD CONVEYOR GOT THUMB CAUGHT BETWEEN BELT & PULLEY.

CLEANING LOADER BUCKET WITH SLEDGE HAMMER & PARTICLE OF ROCK WENT INTO HIS EYE.

WAS WORKING ON TAIL PULLEY AND GOT SOMETHING IN LEFT EYE.

SLIPPED AND FELL AND STRAINED BACK.

REMOVING LOADER ARM TEVER ON 966 LOAD & LEVER ARM FELL ON RIGHT FOOT

EMPLOYEE WAS DRIVING FRONT END LOADER. HIT A DITCH AND HIT THE STEERING WHEEL. HIT MIDSECTION.

EMPLOYEE WASWORKING ON BRAKES ON A R50 HAUL TRUCK WHEN HE ALLEGEDLY PULLED A MUSCLE IN HIS BACK.

LOST GRASP ON LADDER LACERATION OVER LEFT EYE

DERMATITIS 3

REPEATEDLY LIFT3NG CAUSING A REOCURRING BACK INJURY.

DERMATITIS WEAR3NG RUBBER BOOTS AROUND WASH.

EMPLOYEE WAS AD4USTING TAIL PULLY. CONVEYOR BELT HUNG TAIL PULLY AND FLOPPED IT UP INTO FACE CAUSING CUTS.

RUNNING SAND BL5STER. (EMPLOYEE FAILED TO WEAR SUPPLIED PROTECTIVE EQUIPMENT).