TRAINING IN A TRUCK WHERE THE DRIVER STATES THAT HE LOST CONTROL OF THE EMPTY CAT 773 DUMP TRUCK. THE TRUCK VEERED, RAN THROUGH THE PROTECTIVE BERM AND OFF A 70'-HIGH WALL. (TRUCK LANDED ON ITS TOP; BLUNT FORCE TRAUMA INSIDE CAB OF TRUCK.)
Boonesboro Quarry: 1 muerte registrada Metal/Non-Metal
Boonesboro Quarry tiene $93K en multas propuestas de MSHA y $0 pendientes en 3 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en Boonesboro Quarry.
- Muertes
- 1
- Incidentes totales
- 71
- Años en registro
- 1985–2025
- Último incidente
- Oct 2025
ⓘ
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.ⓘ
Una orden bajo la Sección 107(a) retira a los mineros de un área cuando un inspector detecta un peligro inminente. Cada orden se levanta una vez corregida la condición, por lo que esto cuenta las órdenes emitidas, no las que están en vigor ahora.Boonesboro Quarry tiene $93K en multas propuestas de MSHA y $0 pendientes en 3 expedientes impugnados.
ⓘ
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.ⓘ
Las proporciones se calculan sobre las citaciones que llevan la codificación de gravedad y negligencia de la MSHA; una pequeña parte de los registros no está codificada.ⓘ
Impugnar una citación ante la Comisión Federal de Revisión de Seguridad y Salud Minera es un derecho legal. Estas cifras presentan los resultados públicos de ese proceso, según el archivo de Violaciones Impugnadas de MSHA.- Conciliadas 8 · 100%
ⓘ
Una citación Significativa y Sustancial cuenta como sobreviviente cuando la conciliación o la decisión del juez mantuvo la designación, o cuando la impugnación fue desestimada o quedó en rebeldía y la citación quedó como emitida. Las citaciones anuladas o retiradas, y las conciliaciones que quitaron la designación, cuentan en contra.ⓘ
Una reducción o desestimación ante la Comisión es un resultado legítimo de impugnar una multa propuesta. Las cifras son el monto propuesto y el monto confirmado en la decisión del expediente.| Expediente | Decisión | Juez | Año | Propuesta / confirmada |
|---|---|---|---|---|
| KENT 2006-104M | Settlement | Feldman | 2006 | $26K → $21K |
| KENT 2006-70M | Settlement | Feldman | 2006 | $1K → $1K |
| KENT 2006-69M | Settlement | Feldman | 2006 | $268 → $268 |
ⓘ
Una muestra es una medición de cumplimiento en un momento dado, no un historial de exposición individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.Contaminantes en minas de metal y no metal (muestras personales)
ⓘ
Muchas muestras son mediciones de detección de sustancias sin límite de exposición aplicable; se cuentan como muestras pero se excluyen de toda cifra de exceso. Los porcentajes de exceso usan solo muestras con límite establecido.
Última medición: 2026-08-20
ⓘ
Muchas muestras son mediciones de detección de sustancias sin límite de exposición aplicable; se cuentan como muestras pero se excluyen de toda cifra de exceso. Los porcentajes de exceso usan solo muestras con límite establecido.- Diesel particulate (total carbon)6516 en exceso
- Diesel Particulate Material84 en exceso
- TCarbon @ 35081 en exceso
- Nuisance dust, respirable, <1% Qtz41
Ver los análisis individuales (100)
| Fecha | Contaminante | Concentración | Límite | Conc / límite | Ocupación |
|---|---|---|---|---|---|
| 2026-08-20 | TC @ 160 | 279 | 160 | 1.74 | Drill Operator, Rotary |
| 2026-08-20 | EC @ 160 | 204 | 160 | 1.28 | Drill Operator, Rotary |
| 2026-08-20 | TC @ 160 | 179 | 160 | 1.12 | Scaling (mechanical) |
| 2026-08-20 | TC @ 160 | 297 | 160 | 1.86 | Front-end Loader Operator |
| 2020-01-15 | TC @ 160 | 161 | 160 | 1.01 | Front-end Loader Operator |
| 2018-09-04 | TC @ 160 | 163 | 160 | 1.02 | Drill Operator, Rotary Air |
| 2017-05-02 | TC from EC @ 160 | 230 | 160 | 1.44 | Drill Operator, Rotary |
| 2017-05-02 | TC @ 160 | 234 | 160 | 1.46 | Drill Operator, Rotary |
| 2017-05-02 | EC @ 160 | 169 | 160 | 1.06 | Drill Operator, Rotary |
| 2014-10-08 | TC @ 160 | 322 | 160 | 2.01 | Blaster, Powder Gang |
| 2014-10-08 | EC @ 160 | 241 | 160 | 1.51 | Blaster, Powder Gang |
| 2014-10-08 | TC @ 160 | 187 | 160 | 1.17 | Blaster, Powder Gang |
| 2014-09-23 | TC @ 160 | 671 | 160 | 4.19 | Blaster, Powder Gang |
| 2014-09-23 | EC @ 160 | 573 | 160 | 3.58 | Blaster, Powder Gang |
| 2014-07-10 | TC @ 160 | 256 | 160 | 1.60 | Blaster, Powder Gang |
| 2014-07-10 | EC @ 160 | 176 | 160 | 1.10 | Blaster, Powder Gang |
| 2010-11-03 | TC @ 160 | 160 | 160 | 1.00 | Roof Bolter, Rock |
| 2010-08-18 | TC from EC @ 160 | 207 | 160 | 1.29 | Front-end Loader Operator |
| 2010-08-18 | TC @ 160 | 206 | 160 | 1.29 | Scaling (mechanical) |
| 2010-08-18 | TC @ 160 | 296 | 160 | 1.85 | Roof Bolter, Mounted |
| 2010-08-18 | TC from EC @ 160 | 182 | 160 | 1.14 | Scaling (mechanical) |
| 2010-08-18 | TC @ 160 | 215 | 160 | 1.34 | Front-end Loader Operator |
| 2010-08-18 | TC @ 160 | 163 | 160 | 1.02 | Drill Operator, Rotary |
| 2010-08-18 | EC @ 160 | 170 | 160 | 1.06 | Front-end Loader Operator |
| 2010-08-18 | EC @ 160 | 212 | 160 | 1.33 | Roof Bolter, Mounted |
| 2009-02-05 | TC @ 160 | 238 | 160 | 1.49 | Scaling (mechanical) |
| 2007-02-21 | TCarbon @ 350 | 355.69 | 350 | 1.02 | Roof Bolter, Rock |
| 2006-06-20 | Diesel Particulate Material | 358 | 308 | 1.16 | Drill Operator, Jumbo Perc. |
| 2006-06-20 | Diesel Particulate Material | 568 | 308 | 1.84 | Roof Bolter, Rock |
| 2006-06-20 | Diesel Particulate Material | 408 | 308 | 1.32 | Blaster, Powder Gang |
| 2006-06-20 | Diesel Particulate Material | 355 | 308 | 1.15 | Scaling (mechanical) |
| 2026-08-20 | EC @ 160 | 80 | 160 | 0.50 | Truck Driver |
| 2026-08-20 | TC from EC @ 160 | 0 | 160 | 0.00 | Truck Driver |
| 2026-08-20 | TC @ 160 | 116 | 160 | 0.73 | Truck Driver |
| 2026-08-20 | ORGANIC CARBON | 0 | Truck Driver | ||
| 2026-08-20 | ORGANIC CARBON | 71 | Scaling (mechanical) | ||
| 2026-08-20 | EC @ 160 | 108 | 160 | 0.68 | Scaling (mechanical) |
| 2026-08-20 | ORGANIC CARBON | 211 | Front-end Loader Operator | ||
| 2026-08-20 | TC from EC @ 160 | 0 | 160 | 0.00 | Drill Operator, Rotary |
| 2026-08-20 | EC @ 160 | 86 | 160 | 0.54 | Front-end Loader Operator |
| 2026-08-20 | TC from EC @ 160 | 114 | 160 | 0.71 | Front-end Loader Operator |
| 2026-08-20 | ORGANIC CARBON | 75 | Drill Operator, Rotary | ||
| 2026-08-20 | TC from EC @ 160 | 0 | 160 | 0.00 | Scaling (mechanical) |
| 2026-08-18 | Respirable dust, <.1mg | 0 | Truck Driver | ||
| 2026-08-18 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2026-08-18 | Nuisance dust, respirable, <1% Qtz | 0.52 | 10 | 0.05 | Crusher Oper/Worker |
| 2026-08-18 | Nuisance dust, respirable, <1% Qtz | 0.44 | 10 | 0.04 | Roof Bolter, Rock |
| 2026-08-18 | Nuisance dust, respirable, <1% Qtz | 0.19 | 10 | 0.02 | Truck Driver |
| 2024-10-16 | TC @ 160 | 43 | 160 | 0.27 | Drill Operator, Rotary |
| 2024-10-16 | EC @ 160 | 0 | 160 | 0.00 | Drill Operator, Rotary |
| 2024-10-16 | ORGANIC CARBON | 0 | Drill Operator, Rotary | ||
| 2024-10-16 | TC from EC @ 160 | 0 | 160 | 0.00 | Drill Operator, Rotary |
| 2024-10-16 | TC from EC @ 160 | 0 | 160 | 0.00 | Drill Operator, Rotary |
| 2024-10-16 | ORGANIC CARBON | 43 | Drill Operator, Rotary | ||
| 2024-10-16 | EC @ 160 | 86 | 160 | 0.54 | Drill Operator, Rotary |
| 2024-10-16 | TC @ 160 | 129 | 160 | 0.81 | Drill Operator, Rotary |
| 2024-10-09 | Nuisance dust, respirable, <1% Qtz | 0.22 | 10 | 0.02 | Crusher Oper/Worker |
| 2024-10-09 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2024-10-09 | Respirable dust, <.1mg | 0 | Truck Driver | ||
| 2024-01-26 | Nuisance dust, respirable, <1% Qtz | 0.68 | 10 | 0.07 | Blaster, Powder Gang |
| 2024-01-26 | Nuisance dust, respirable, <1% Qtz | 0.17 | 10 | 0.02 | Front-end Loader Operator |
| 2024-01-26 | Nuisance dust, respirable, <1% Qtz | 0.97 | 10 | 0.10 | Truck Driver |
| 2024-01-26 | Nuisance dust, respirable, <1% Qtz | 0.76 | 10 | 0.08 | Truck Driver |
| 2024-01-12 | TC from EC @ 160 | 0 | 160 | 0.00 | Truck Driver |
| 2024-01-12 | EC @ 160 | 0 | 160 | 0.00 | Truck Driver |
| 2024-01-12 | TC @ 160 | 65 | 160 | 0.41 | Truck Driver |
| 2024-01-12 | ORGANIC CARBON | 0 | Crusher Oper/Worker | ||
| 2024-01-12 | TC from EC @ 160 | 0 | 160 | 0.00 | Truck Driver |
| 2024-01-12 | EC @ 160 | 0 | 160 | 0.00 | Crusher Oper/Worker |
| 2024-01-12 | EC @ 160 | 0 | 160 | 0.00 | Truck Driver |
| 2024-01-12 | TC @ 160 | 0 | 160 | 0.00 | Crusher Oper/Worker |
| 2024-01-12 | ORGANIC CARBON | 108 | Truck Driver | ||
| 2024-01-12 | ORGANIC CARBON | 0 | Front-end Loader Operator | ||
| 2024-01-12 | TC from EC @ 160 | 0 | 160 | 0.00 | Front-end Loader Operator |
| 2024-01-12 | EC @ 160 | 0 | 160 | 0.00 | Front-end Loader Operator |
| 2024-01-12 | TC @ 160 | 0 | 160 | 0.00 | Front-end Loader Operator |
| 2024-01-12 | TC from EC @ 160 | 0 | 160 | 0.00 | Crusher Oper/Worker |
| 2024-01-12 | ORGANIC CARBON | 49 | Truck Driver | ||
| 2024-01-12 | TC @ 160 | 132 | 160 | 0.83 | Truck Driver |
| 2024-01-08 | Nuisance dust, respirable, <1% Qtz | 0.72 | 10 | 0.07 | Truck Driver |
| 2024-01-08 | Nuisance dust, respirable, <1% Qtz | 1.37 | 10 | 0.14 | Truck Driver |
| 2024-01-08 | Nuisance dust, respirable, <1% Qtz | 0.35 | 10 | 0.04 | Scaling (mechanical) |
| 2024-01-08 | Nuisance dust, respirable, <1% Qtz | 0.17 | 10 | 0.02 | Front-end Loader Operator |
| 2023-09-15 | Nuisance dust, respirable, <1% Qtz | 0.2 | 10 | 0.02 | Scaling (mechanical) |
| 2023-09-15 | Nuisance dust, respirable, <1% Qtz | 0.37 | 10 | 0.04 | Drill Operator, Rotary |
| 2023-09-15 | Nuisance dust, respirable, <1% Qtz | 0.27 | 10 | 0.03 | Roof Bolter, Mounted |
| 2022-12-16 | EC @ 160 | 37 | 160 | 0.23 | Scaling (mechanical) |
| 2022-12-16 | ORGANIC CARBON | 0 | Scaling (mechanical) | ||
| 2022-12-16 | TC from EC @ 160 | 0 | 160 | 0.00 | Front-end Loader Operator |
| 2022-12-16 | EC @ 160 | 0 | 160 | 0.00 | Front-end Loader Operator |
| 2022-12-16 | TC @ 160 | 80 | 160 | 0.50 | Front-end Loader Operator |
| 2022-12-16 | TC from EC @ 160 | 0 | 160 | 0.00 | Truck Driver |
| 2022-12-16 | EC @ 160 | 0 | 160 | 0.00 | Truck Driver |
| 2022-12-16 | TC @ 160 | 56 | 160 | 0.35 | Scaling (mechanical) |
| 2022-12-16 | TC @ 160 | 0 | 160 | 0.00 | Truck Driver |
| 2022-12-16 | ORGANIC CARBON | 0 | Truck Driver | ||
| 2022-12-16 | ORGANIC CARBON | 55 | Front-end Loader Operator | ||
| 2022-12-16 | TC from EC @ 160 | 0 | 160 | 0.00 | Scaling (mechanical) |
| 2022-03-08 | TC from EC @ 160 | 0 | 160 | 0.00 | Blaster, Powder Gang |
| 2022-03-08 | TC from EC @ 160 | 0 | 160 | 0.00 | Scaling (mechanical) |
Muestras de área (aire de molino y taller)
Última medición: 2026-08-20Ver los análisis individuales (23)
| Fecha | Contaminante | Concentración | Límite | Conc / límite | Área muestreada |
|---|---|---|---|---|---|
| 2026-08-20 | TC @ 160 | 112 | UG ACTIVE MINING | ||
| 2026-08-20 | EC @ 160 | 84 | UG ACTIVE MINING | ||
| 2024-10-16 | EC @ 160 | 0 | UG SHAFT/STATION | ||
| 2024-10-16 | TC @ 160 | 0 | UG SHAFT/STATION | ||
| 2024-01-12 | TC @ 160 | 0 | UG TRAVEL/HAULAGE | ||
| 2024-01-12 | EC @ 160 | 0 | UG TRAVEL/HAULAGE | ||
| 2022-12-16 | TC @ 160 | 0 | UG SHAFT/STATION | ||
| 2022-12-16 | EC @ 160 | 0 | UG SHAFT/STATION | ||
| 2022-03-08 | EC @ 160 | 0 | UG SHAFT/STATION | ||
| 2022-03-08 | TC from EC @ 160 | 0 | UG SHAFT/STATION | ||
| 2021-04-27 | EC @ 160 | 0 | UG TRAVEL/HAULAGE | ||
| 2021-04-27 | TC from EC @ 160 | 0 | UG TRAVEL/HAULAGE | ||
| 2021-04-27 | TC @ 160 | 0 | UG TRAVEL/HAULAGE | ||
| 2017-05-02 | TC @ 160 | 87 | UG TRAVEL/HAULAGE 98 | ||
| 2017-05-02 | EC @ 160 | 64 | UG TRAVEL/HAULAGE 98 | ||
| 2017-05-02 | TC from EC @ 160 | 0 | UG TRAVEL/HAULAGE 98 | ||
| 2010-08-18 | TC from EC @ 160 | 0 | UG ACTIVE MINING AR | ||
| 2010-08-18 | TC @ 160 | 258 | UG ACTIVE MINING AR | ||
| 2010-08-18 | EC @ 160 | 213 | UG ACTIVE MINING AR | ||
| 2009-02-05 | TC from EC @ 160 | 0 | UG TRAVEL/HAU AREA | ||
| 2009-02-05 | TC @ 160 | 190 | UG TRAVEL/HAU AREA | ||
| 2009-02-05 | EC @ 160 | 157 | UG TRAVEL/HAU AREA | ||
| 2008-06-25 | Oxygen | 0 | LEVEL 3 |
Boonesboro Quarry registró 10.20 casos de lesión reportables por cada 100 trabajadores a tiempo completo en 2025.
ⓘ
Esta tasa son los casos de lesión reportables por cada 100 trabajadores a tiempo completo por año, calculada como 200,000 por los casos dividido entre las horas-empleado reportadas por el operador a la MSHA. Los casos son lesiones que la MSHA clasificó en grado 01 a 07; se excluyen los eventos de solo accidente que no lesionaron a nadie, y también las lesiones de contratistas, cuyas horas no corresponden a una sola mina. Las tasas comienzan en el año 2000, cuando inicia el reporte trimestral de empleo, y se omiten por debajo de 20,000 horas en un año.| Año | tasa de casos totales | días perdidos | mortales |
|---|---|---|---|
| 2025 * | 10.20 | 2.55 | 0.000 |
| 2024 * | 0.00 | 0.00 | 0.000 |
| 2023 * | 2.71 | 0.00 | 0.000 |
| 2022 * | 11.90 | 0.00 | 0.000 |
| 2021 * | 5.83 | 0.00 | 0.000 |
| 2020 * | 2.91 | 0.00 | 0.000 |
| 2019 * | 2.82 | 0.00 | 0.000 |
| 2018 * | 17.96 | 0.00 | 0.000 |
- Allen Company Inc 1950 al presente
| Año | Empleados |
|---|---|
| 2026 | 40 |
| 2025 | 40 |
| 2024 | 39 |
| 2023 | 43 |
| 2022 | 42 |
| 2021 | 43 |
| 2020 | 40 |
| 2019 | 42 |
| 2018 | 41 |
| 2017 | 41 |
| 2016 | 46 |
| 2015 | 38 |
| 2014 | 40 |
| 2013 | 41 |
| 2012 | 43 |
| 2011 | 40 |
| 2010 | 38 |
| 2009 | 39 |
| 2008 | 40 |
| 2007 | 39 |
| 2006 | 38 |
| 2005 | 36 |
| 2004 | 38 |
| 2003 | 39 |
| 2002 | 37 |
| 2001 | 40 |
| 2000 | 39 |
Boonesboro Quarry se ubica en Madison County, Kentucky, donde la categoría minera del Censo representa el 0.3% del empleo del condado.
ⓘ
Las cifras del condado provienen de la Encuesta sobre la Comunidad Estadounidense de la Oficina del Censo de EE. UU., estimaciones quinquenales agrupadas, por lo que la edición de 2023 abarca de 2019 a 2023. La categoría del Censo es 'minería, explotación de canteras y extracción de petróleo y gas', que es más amplia que la jurisdicción de la MSHA e incluye a trabajadores de petróleo y gas que ninguna mina emplea. Estas cifras describen el condado circundante, no esta mina, y no son un factor en ningún incidente específico.ⓘ
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2026 Q2 | 17,347 | 4 | 0 | 230.6 |
| 2026 Q1 | 18,556 | 0 | 0 | 0.0 |
| 2025 Q4 | 18,560 | 3 | 0 | 161.6 |
| 2025 Q3 | 21,432 | 5 | 0 | 233.3 |
| 2025 Q2 | 19,757 | 5 | 0 | 253.1 |
| 2025 Q1 | 18,655 | 3 | 0 | 160.8 |
| 2024 Q4 | 18,250 | 3 | 0 | 164.4 |
| 2024 Q3 | 18,350 | 1 | 1 | 54.5 |
Mostrar 98 trimestres anteriores Ocultar trimestres anteriores
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2024 Q2 | 19,757 | 0 | 0 | 0.0 |
| 2024 Q1 | 19,136 | 8 | 1 | 418.1 |
| 2023 Q4 | 17,211 | 0 | 0 | 0.0 |
| 2023 Q3 | 19,212 | 1 | 1 | 52.1 |
| 2023 Q2 | 18,465 | 1 | 0 | 54.2 |
| 2023 Q1 | 18,784 | 1 | 0 | 53.2 |
| 2022 Q4 | 19,574 | 3 | 1 | 153.3 |
| 2022 Q3 | 16,183 | 0 | 0 | 0.0 |
| 2022 Q2 | 16,337 | 1 | 0 | 61.2 |
| 2022 Q1 | 15,112 | 0 | 0 | 0.0 |
| 2021 Q4 | 16,066 | 0 | 0 | 0.0 |
| 2021 Q3 | 17,779 | 1 | 1 | 56.2 |
| 2021 Q2 | 19,932 | 0 | 0 | 0.0 |
| 2021 Q1 | 14,795 | 1 | 0 | 67.6 |
| 2020 Q4 | 16,144 | 2 | 0 | 123.9 |
| 2020 Q3 | 18,308 | 0 | 0 | 0.0 |
| 2020 Q2 | 16,303 | 1 | 0 | 61.3 |
| 2020 Q1 | 17,921 | 0 | 0 | 0.0 |
| 2019 Q4 | 18,139 | 0 | 0 | 0.0 |
| 2019 Q3 | 17,966 | 1 | 0 | 55.7 |
| 2019 Q2 | 17,765 | 1 | 1 | 56.3 |
| 2019 Q1 | 17,053 | 0 | 0 | 0.0 |
| 2018 Q4 | 18,440 | 0 | 0 | 0.0 |
| 2018 Q3 | 19,523 | 1 | 0 | 51.2 |
| 2018 Q2 | 20,850 | 2 | 0 | 95.9 |
| 2018 Q1 | 19,132 | 3 | 0 | 156.8 |
| 2017 Q4 | 18,232 | 2 | 0 | 109.7 |
| 2017 Q3 | 20,254 | 1 | 0 | 49.4 |
| 2017 Q2 | 20,561 | 2 | 1 | 97.3 |
| 2017 Q1 | 19,178 | 1 | 0 | 52.1 |
| 2016 Q4 | 15,818 | 1 | 0 | 63.2 |
| 2016 Q3 | 17,939 | 1 | 1 | 55.7 |
| 2016 Q2 | 17,782 | 2 | 1 | 112.5 |
| 2016 Q1 | 17,325 | 2 | 0 | 115.4 |
| 2015 Q4 | 18,657 | 1 | 0 | 53.6 |
| 2015 Q3 | 20,594 | 4 | 3 | 194.2 |
| 2015 Q2 | 18,684 | 4 | 3 | 214.1 |
| 2015 Q1 | 12,978 | 0 | 0 | 0.0 |
| 2014 Q4 | 17,545 | 7 | 3 | 399.0 |
| 2014 Q3 | 19,167 | 4 | 1 | 208.7 |
| 2014 Q2 | 18,350 | 5 | 0 | 272.5 |
| 2014 Q1 | 18,287 | 5 | 1 | 273.4 |
| 2013 Q4 | 20,182 | 14 | 4 | 693.7 |
| 2013 Q3 | 21,979 | 2 | 0 | 91.0 |
| 2013 Q2 | 21,883 | 1 | 1 | 45.7 |
| 2013 Q1 | 20,782 | 1 | 1 | 48.1 |
| 2012 Q4 | 17,477 | 7 | 2 | 400.5 |
| 2012 Q3 | 20,583 | 5 | 1 | 242.9 |
| 2012 Q2 | 20,362 | 3 | 0 | 147.3 |
| 2012 Q1 | 21,010 | 4 | 1 | 190.4 |
| 2011 Q4 | 20,499 | 4 | 1 | 195.1 |
| 2011 Q3 | 22,865 | 4 | 3 | 174.9 |
| 2011 Q2 | 20,472 | 4 | 1 | 195.4 |
| 2011 Q1 | 19,700 | 4 | 1 | 203.0 |
| 2010 Q4 | 25,634 | 5 | 2 | 195.1 |
| 2010 Q3 | 27,131 | 3 | 2 | 110.6 |
| 2010 Q2 | 19,381 | 3 | 0 | 154.8 |
| 2010 Q1 | 22,180 | 1 | 1 | 45.1 |
| 2009 Q4 | 10,034 | 3 | 1 | 299.0 |
| 2009 Q3 | 10,344 | 3 | 0 | 290.0 |
| 2009 Q2 | 11,098 | 2 | 0 | 180.2 |
| 2009 Q1 | 19,043 | 2 | 0 | 105.0 |
| 2008 Q4 | 21,959 | 2 | 0 | 91.1 |
| 2008 Q3 | 21,620 | 0 | 0 | 0.0 |
| 2008 Q2 | 22,478 | 11 | 2 | 489.4 |
| 2008 Q1 | 19,883 | 9 | 1 | 452.6 |
| 2007 Q4 | 21,838 | 3 | 1 | 137.4 |
| 2007 Q3 | 21,696 | 2 | 0 | 92.2 |
| 2007 Q2 | 22,861 | 1 | 0 | 43.7 |
| 2007 Q1 | 20,762 | 2 | 0 | 96.3 |
| 2006 Q4 | 22,132 | 3 | 1 | 135.6 |
| 2006 Q3 | 24,398 | 4 | 2 | 163.9 |
| 2006 Q2 | 23,892 | 5 | 2 | 209.3 |
| 2006 Q1 | 19,138 | 21 | 2 | 1097.3 |
| 2005 Q4 | 19,835 | 1 | 0 | 50.4 |
| 2005 Q3 | 25,378 | 13 | 10 | 512.3 |
| 2005 Q2 | 22,094 | 20 | 3 | 905.2 |
| 2005 Q1 | 17,760 | 1 | 1 | 56.3 |
| 2004 Q4 | 21,868 | 1 | 0 | 45.7 |
| 2004 Q3 | 23,312 | 2 | 1 | 85.8 |
| 2004 Q2 | 22,344 | 1 | 0 | 44.8 |
| 2004 Q1 | 18,918 | 4 | 2 | 211.4 |
| 2003 Q4 | 23,454 | 2 | 1 | 85.3 |
| 2003 Q3 | 24,862 | 0 | 0 | 0.0 |
| 2003 Q2 | 23,435 | 1 | 1 | 42.7 |
| 2003 Q1 | 19,146 | 1 | 0 | 52.2 |
| 2002 Q4 | 22,115 | 0 | 0 | 0.0 |
| 2002 Q3 | 22,275 | 0 | 0 | 0.0 |
| 2002 Q2 | 22,134 | 1 | 0 | 45.2 |
| 2002 Q1 | 20,034 | 0 | 0 | 0.0 |
| 2001 Q4 | 25,015 | 4 | 0 | 159.9 |
| 2001 Q3 | 26,366 | 1 | 1 | 37.9 |
| 2001 Q2 | 23,604 | 0 | 0 | 0.0 |
| 2001 Q1 | 20,005 | 9 | 4 | 449.9 |
| 2000 Q4 | 23,094 | 0 | 0 | 0.0 |
| 2000 Q3 | 28,031 | 3 | 1 | 107.0 |
| 2000 Q2 | 23,839 | 0 | 0 | 0.0 |
| 2000 Q1 | 18,906 | 0 | 0 | 0.0 |
Muertes en esta mina
1 registradasIncidentes reportables
70 en archivo (excluyendo las muertes anteriores)2025 · 4 incidentes
Miner was injured while using a scaling bar to remove loose rock while loading a header. The bar glanced off the rock and hit EE on EE's right thumb. EE was taken to be evaluated and was diagnosed with a contusion and placed on restricted duty. Restrictions do not prevent EE from driving a truck, which EE has been doing without incident.
EE lost EE's balance while loading a floor shot and hurt EE's knee. EE was taken to the Occupational clinic to be evaluated and was diagnosed with a left knee sprain. EE was placed on restricted duty until EE's follow up appointment on 9/5/25.
The miner was adjusting a conveyor belt. Miner was injured when the pipe wrench miner was using slipped & mashed finger. Miner was wearing ppe. Miner was taken for a medical exam & diagnosed w/ a contusion but only received 1st aid treatment. Miner was restricted from lifting weight with hand. On follow-up appt. miner was told to only work in a splint & would be reevaluated.
The miner was injured prior to loading explosives at a header. EE entered the basket on the powder truck and was manipulating the ANFO hose when the hose "whipped" and struck the face, causing small pieces of rock to break off. One piece struck EE in the right palm causing a laceration.
2023 · 1 incidente
EE was cleaning EE's windows and mirrors on the HM300-5 articulating truck, when EE started to come back down the steps, EE missed a step causing EE to fall landing on EE's back and shoulder.
2022 · 4 incidentes
EE dropped EE's flashlight on the ground, when EE bent over to pick it up EE lost EE's balance and fell face first on the gravel.
EE was riding on the loader with EE's legs hanging off the front of the loader to the backside of the mine to get a pickup truck. The loader driver went to make a left turn and when EE did the step on the front of the loader caught EE's left leg.
EE WAS TAKING DRILL STEEL APART OFF THE FLOOR DRILL, THE STEEL SWUNG AROUND STRIKING THEM ON THE TOP OF THE LEFT HAND.
EE was climbing down off the WA 500. Misjudged the steps and fell hitting the back of head on the ground.
2021 · 2 incidentes
The employee was removing the 4" dust suppression hose that was stopped up on HD-943 drill.
EE was weed eating the bank and there was loose rock in the area, EE was starting to walk up the bank and slipped on the loose rock, landing on their right knee.
2020 · 1 incidente
Employee had lost the tooth off the pick and was trying to recover it from near the face. While picking up the scaler tooth a rock fell off and struck the employee in the right shoulder.
2019 · 1 incidente
EE was helping carrying a screen to be changed out, and stepped into a 5" opening at the edge of the plywood and screen.
2018 · 7 incidentes
Miner was operating a ridged frame haul truck. EE was being loaded at the mucking pile and was jostled in the cab bumping head. Miner said ee had seat belt on at the time.
EE was helping unload the crane off the lowboy being delivered to the Quarry.
Employee was loading plates onto the roof bolter, when they slipped and fell onto their pinky finger.
Employee was operating the excavator, when it became hung up on a large rock, the rock broke loose causing the excavator to drop back on the ground jarring the employee.
EE placed EE's hand on the tail pulley to turn it in order to access the set screws. Other employees were helping, and one employee turned the pulley at the same time resulting in EE's left hand being cut.
EE was running the anfo hose on the powder truck loading a shot, when EE felt a pain and a pop in EE's right forearm.
EE was hammering on a piece of metal, trying to straighten it out. EE missed swinging at the metal and strained EE's right wrist. An incident report was filed on but no medical attention was administered. EE aggravated the wrist again on 3/12/18, and sought medical attention on 3/13/18.
2017 · 1 incidente
Miner was welding on a piece of steel in the shop. EE removed gloves and walked around the welding table to reposition leads. Then went back to the steel to slide it around and burned hand on a hot weld.
2015 · 1 incidente
EE was complaining of chest pains
2014 · 1 incidente
EE was driving when he started feeling light headed and dizzy.
2013 · 1 incidente
EE was raising manlift to get to feeder pan when he caught his right index finger between structure and basket. EE stated that manlift traveling after he let off of controls.
2012 · 2 incidentes
Roof fall no injuries
Roof fall over the weekend - no one on site.
2011 · 2 incidentes
EE was on drill to remove radiator when he slipped and fell approximately 6-7 feet EE broke both wrists
EE was cutting light gauge stainless steel with a grinder, EE held the material improperly grider kicked up and the blade hit the inside of his forearm.
2010 · 4 incidentes
Wrecking forms away from concrete, crow bar slipped and just had a light sprain to left hand wrist.
Employee was inspecting boom on a track hoe. While climbing down the ladder he lost his footing and fell 3-4 feet to ground. He landed on his back and left elbow. Fractured left elbow, contusions to left knee and lower back, Fractured tail bone.
Reaching to move one piece of sheet metal roofing material, a second piece slid into worker's safety glasses and cut his nose.
N/A Abandoned Area Not Maintained.
2009 · 2 incidentes
The roof bolter failed to install roof bolts properly along with bad ground conditions which contributed to this roof fall. This caused an area 30'X 40' X 12' deep to fall.The roof will have to be repaired or abandoned.
Ee was cleaning floor of screening plant, pushing dust through an open man door that had been opened. A CO-worker ask ee to hand him some screen panels. He walked toward co-worker with the screen panels. He forgot that the man door was open and he fell into the opening to catwalk about 6 ft below injuring his left knee.
2006 · 1 incidente
EE was performing maintenance on equipment. EE used pocket knife to cut tie wrap. Knife slipped and punctured ee's left wrist. Laceration required four stitches.
2005 · 3 incidentes
In the course of performing his normal duties, employee thinks he twisted his left hip while ascending and descending the equipment.
Employee was climbing down truck ladder and fell hitting the ground on right side and back.
EMPLOYEE STATES THAT HE LOST CONTROL OF THE EMPTY CAT 773 DUMP TRUCK HE WAS DRIVING. THE TRUCK VEERED, RAN THROUGH THE PROTECTIVE BERM AND OFF A 70'-HIGH WALL. (EMPLOYEE: NEW HIRE IN TRAINING. TRUCK LANDED ON ITS TOP. RESULTED IN PASSENGER FATALITY - BLUNT FORCE TRAUMA INSIDE CAB OF TRUCK; NEITHER WAS THROWN FROM CAB.)
2004 · 1 incidente
EE WAS SCALING WHEN EXCAVATOR SLIPPED OFF ROCK, JARRING EXCAVATOR AND THROWING EE ONTO THE FLOOR, INJURING HIS BACK.
2002 · 1 incidente
EE WAS HAND SCALING WHEN HE FELT PAIN IN HIS RT. SHOULDER.
1999 · 3 incidentes
EE STEPPED ROM TRUCK ONTO CAT WALK & SLIPPED ON LOOSE ROCK. HE STRUCK HIS HEAD ON A SUPPORT POSTEE RECD BRUISES ON HIS HEAD
EE WAS USING A SAW WHEN HE DEVELOPED A PAIN IN HIS NECK.NECK LATER BECAME SORE & STIFF
EE WAS HELPING ANOTHER EE TO LIFT A SET OF STEELCONVEYOR LEGS. EE STRAINED BACK & GROIN ARA
1998 · 2 incidentes
EE WAS STEAM CLEANING PARTS, WHEN HE TRIPPED ONTHE STEAM JENNY HOSE. EE RECEIVED A FRACTURE TO HIS LEFT ANKLE.
EE WAS CLIMBING ONTO RUNNING CONVEYOR TO DISLODGE ROCK WHEN HIS FOOT SLIPPED AND BECAME CAUGHT IN CONVEYOR. EE RECD CONTUSIONS TO HIS RIGHT FOOT.
1997 · 1 incidente
EMPLOYEE WAS REMOVING AN OLD SHAFT FROM A SPROCKET WHEN A CHIP OF STEEL FROM A PUNCH STRUCK HIS FINGER AND BROKE IT.
1994 · 2 incidentes
EE WAS SHOVELING ROCK FROM CRUSHER WHEN HE HURT HIS BACK.
EMPLOYE EWAS REPLACING COIL SPRINGS ON PRIMARY FEEDER. HE WAS COMPRESSING AND BANDING COIL SPRINGS WHEN HIS HAND SLIPPED RELEASING SPRINGS STRIKING EMPLOYEE IN FACE.
1993 · 4 incidentes
EMPLOYEE WAS UNSCREWING DRILL STEELS AND IT FELL ON FINGER.
EE WAS WORKING ON TOP OF ENGINE COMPARTMENT OF AN EUCLID WHEN HE TRIPPED AND FELL OFF TRUCK.
EMPLOYEE WAS HELPING MECHANIC LIFT PLANTARY ASSEMBLY ONTO TRUCK WHEN HE PULLED MUSCLE IN LEFT SIDE.
EMPLOYEE WAS MOVING WIRES IN AN ELECTRICAL PANEL WHILE IT WAS ENERGIZED WHEN ONE WIRE WENT TO GROUND SHORTING PANEL BOX OUT. EMPLOYEE WAS THROWN OR FELL FROM STEP LADDER HE WAS STANDING ON.
1991 · 2 incidentes
EMPLOYEE STATES IT WAS FOGGY IN MINE AND HE DID NOT SEE THE PILLAR THAT HE HIT WITH THE VECHICLE HE WAS DRIVING.
EMPLOYEE STATES HE MIGHT HAVE FELT A CRAMP OR STING WHEN HE GOT DOWN FROM HIS TRUCK TO GO HOME ON MARCH 25,1991.HE HAD SEVERE BACK PAIN WHILE DRIVING HOME FROM WORK.HIS BACK HURT ALL NIGHT.
1989 · 6 incidentes
EMPL DRILLING WHEN ROCK FELL AND HIT HIM ON ARM CAUSING STUMBLE,HITTING HEAD ON WALL.
EMPLOYEE TANGLED FOOT IN AIR LINES WHEN CLIMBING THROUGH AREA WHERE AIR LINES ARE ROUTED CAUSING HIM TO FALL ON OTHER LEG TWISTING BACK.
LIFTED OUTRIGGER PAD TO PLACE ONCRANE HURTLOWER BACK
EMPL MOVING STEEL PLATE AND DROPPED IT ON HIS FOOT.
EMPLOYEE WAS CLIMBING UPON LOADER TO CHECK OIL PULLED MUSCLE IN BACK
EMPLOYEE STOPPED VEHICLE UNDER BIN TO LAOD TRUCK GOT OUT OF TRUCK & FORGOT TO SET PARK BRAKE TRUCK ROLLED BACKWARDS CATGCHING FINGER BETWEEN DOOR & BIN CUTTING & BRUISING RT.RING FINGER
1988 · 3 incidentes
EMP. WAS PULLING HOSE FROMM REEL O P AND H CRANE, FEET SLIPPED, JERKING BACK.
EMPLOYEE WAS REAPIRING FEEDER ROLL TO REAPIR CRUSHER FEEDER AND DROPPED HYDRAULIC JACK ON FINGER.
EMPLOYEE WAS LIFTING WATER HOSE FROM POOL OF WATER.FELT SHARP STING IN GROIN AREA.
1987 · 3 incidentes
EMP WAS MOUNTIN1 SPEED REDUCER AND HEAD PULLEY ON #5 CRUSHER HE CAUGHT FINGER BETWEEN BRACKET AND TURN BUCKLE OF SPEED REDUCER
EMPLOYEE WAS HE5PING ROLL CRUSHERBY HAND SLEEVE CAUGHT IN V-BELTS & PULLED HIS FINGER INTO SHEAVE PINCHING LEFT THUMB
EMPLOYEE CLIMBE8 UP ON CONVEYOR ABOUT 2 FEET FROM GROUND.HE JUMPED DOWN FROM CONVEYOR AND CAUGHT RING IN PIECE OF METAL.EMPLOYEE CUT FINGER AND FRACTURED BONE ON LEFT HAND.
1986 · 3 incidentes
EMPL LIFTING SP9ING LEAF INTO PLACE ON REAR OF TRUCK WHEN HE TWISTED LEFT KNEE.
UNCOUPLING DRIL5 STEEL-IT FELL ON RIGHT HAND
WATCHING WELDER3WITHOUT PROPER GLASSES ON
1985 · 1 incidente
EMP WAS DRILLING IN MINE WHEN HOT GREASE CAME OUT OF COUPLING OF DRILL AND GOT IN HIS EYES