Cantera Dorado Pta 1 tiene $15K en multas propuestas de MSHA y $614 pendientes en 2 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en Cantera Dorado Pta 1.
Muertes
0
Incidentes totales
33
Años en registro
2002–2010
Último incidente
Jun 2010
Historial de cumplimiento
Citaciones de MSHA desde 2002
80
citaciones
43
significativas y sustanciales
$14,671
multas propuestas
$13,944
pagado a la fecha
95% de las multas propuestas pagadas a la fecha, una diferencia de $727.
Fuente: datos de violaciones de MSHA, actualizados semanalmente.
Actividad de inspección
Inspecciones de MSHA desde 2002
58
inspecciones registradas
451
horas de inspección
n/d
citaciones por 100 horas de inspección
ⓘEsta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.
Tasa retenida: 451 horas de inspección son muy pocas para una tasa estable. Se requiere un mínimo de 1,000 horas de inspección.
Fuente: datos de inspecciones de MSHA, actualizados semanalmente.
Cantera Dorado Pta 1 tiene $15K en multas propuestas de MSHA y $614 pendientes en 2 expedientes impugnados.
Disposicion de multas
ⓘLas diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.
$15K
multas propuestas
$14K
evaluacion actual
$14K
pagado a la fecha
$614
pendiente
73 evaluaciones son ordenes finales; 2 expedientes impugnados.
Al ultimo periodo de evaluacion el 2010-02-10.
Fuente: datos de infracciones evaluadas y de conferencia/litigio de MSHA, actualizados semanalmente.
Tasas de seguridad trimestrales
ⓘCitaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.
Citaciones por millón de horas trabajadas, según lo reportado a MSHA
8 de junio de 2010PR · Metal/No metálicoEncargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campoHERRAMIENTAS MANUALES (SIN MOTOR)
EE alledges that while removing an engine part from a loader he made an effort to loosen the screws when he felt a pain in his lower back.
8 de marzo de 2010PR · Metal/No metálicoEncargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campoMANEJO DE MATERIALES
The EE alleges that while he took the stand that holds the strut hydraulic hammer with a 16-pound brown, he felt a sharp pain and cramp in his right arm.
2009 · 4 incidentes
26 de octubre de 2009PR · Metal/No metálicoConductor de camión de acarreo/fuera de carretera/carbón/mineral/mina/cantera/roca/llanta neumática, Conductor de camión de transporteTRANSPORTE MOTORIZADO
The employee alleges that while unloading material in the hauling truck in the crusher primary area he injured his left leg, left shoulder and left arm and elbow.
8 de julio de 2009PR · Metal/No metálicoOperador de bulldozer, Operador universal, Operador de equipo pesado, Ingeniero operadorMANEJO DE MATERIALES
Employee alleges that while working with a wrench, it fell and pinched his right hand causing an injury between his pinkie finger and his right finger. Five(5) stitches were taken
The employee was in the secondary plant repairing a pump. He hurt his hand with a piece of metal that flew when he was hammering. The metal penetrated the skin on his left hand. He felt a strong pain in his left hand.
The EE was doing some maintenance work on the conveyor belt #8. He was using a knife to cut the belt, when it slipped and gave him a deep wound on his right leg.
8 de marzo de 2008PR · Metal/No metálicoConductor de camión de acarreo/fuera de carretera/carbón/mineral/mina/cantera/roca/llanta neumática, Conductor de camión de transporteMANEJO DE MATERIALES
The EE was parking the truck on the premises of the company. While he was getting off the truck, he hurt his right ankle on a mountain of dirt. He felt a strong pain.
The EE was unscrewing bolts in order to change the converyor belt. When he loosened the bolt, the wrench hit him in the nose and right eyebrow, cut his skin.
The employee was placing a beltscale in the conveyor with another employee. While lifting a metal roller it turned over pinching his right ring finger causing an open wound.
The EE was bringing the mine loader to the office area. As he bent down, he slipped on the stairs and fell on them. The EE feels lots of pain in his lower back side and his right leg.
EE alleges that during the week of 24 to 28 of July he was carrying a screen cloth that he placed on the Secondary Vibrator which has different weights. He injured his back and his right thigh.
The employee was lifting up some acetylene tanks to put them in the loader and injured his back.
28 de febrero de 2006PR · Metal/No metálicoCapataz de planta de preparación, Supervisor, Supervisor de planta de molienda, Supervisor de hornoRESBALÓN O CAÍDA DE PERSONA
The employee was climbing the stairs and did not step firmly, which caused an injury in his right knee with the sharp stairs. They took four stitches on his knee.
17 de febrero de 2006PR · Metal/No metálicoAlmacenista, Ensacador, Paletizador/Apilador, Encargado de almacén, Empacador, Fabricante, Operador de planta de lavadoRESBALÓN O CAÍDA DE PERSONA
The employee was going up the stairs to verify the surge tank level. Before reaching the top he turned around and his hands slipped and he fell setting down between the tank pump. He injured his back.
2005 · 6 incidentes
21 de diciembre de 2005PR · Metal/No metálicoBombero (operario de bombas)MANEJO DE MATERIALES
The employee was connecting a special pole in the sub-station of the secondary. The pole rebounded and struck the right part of his face. He had a small cut in his mouth.
13 de julio de 2005PR · Metal/No metálicoObrero, Herrero, Cuadrilla, Mensajero de repuestos, Peón, Recolector, Operario de minaHERRAMIENTAS MANUALES (SIN MOTOR)
While the employee was repairing a piece of machinery with a hammer, he hit a piece of metal, which caused an injury to his fourth finger from the right of his left hand.
21 de junio de 2005PR · Metal/No metálicoCapataz de planta de preparación, Supervisor, Supervisor de planta de molienda, Supervisor de hornoHERRAMIENTAS MANUALES (SIN MOTOR)
THE EMPLOYEE WAS ADJUSTING THE SCREWS OF THE PRIMARY CRUSHERS BLADES, A PART OF THE WRENCH DISASSEMBLED AND IMPACTED THE MIDDLE FINGER OF HIS LEFT HAND
31 de mayo de 2005PR · Metal/No metálicoCapataz de planta de preparación, Supervisor, Supervisor de planta de molienda, Supervisor de hornoMANEJO DE MATERIALES
The employee was cleaning a machine, which he had mistakenly forgotten to turn off. The machine activated itself, cutting the index finger of his right hand.
THE EMPLOYEE WAS CLEANING THE FLOOR UNDER THE PRIMARY PLANT SCREEN, REMOVING EXCESS MATERIAL WITH A MOBILE EQUIPMENT "BOBCAT". A PVC WATER PIPE WAS BROKEN AND THE EMPLOYEE UNBUCKLED HIS SAFETY BELT AND INCLINED HIS BODY UP TO LOOK AND AT THAT MOMENT THE UPPER BUCKET FELL TRAPPING HIM BETWEEN THE BUCKET AND THE FRONT HOOD EQUIPMENT. HE RECEIVED CONTUSIONS TO CHEST, SHOULDERS & BACK.
THE EE WAS GOING DOWN THE STAIRWAY TO EMPTY THE GARBAGE, UPON STEPING ON THE GROUND SHE SLIPPED AND FELL FORWARD, HURTING HER CHEST, RIGHT ARM, RIGHT LEG, THE KNEES AND BOTH HANDS.
16 de septiembre de 2003PR · Metal/No metálicoSoldador (de taller)MAQUINARIA
THE EE WAS CUTTING METAL & A PIECE FELL ON HIS PANTS PERFORATED THEM CAUSING THE METAL TO FALL INTO HIS LEFT BOOT & BURNED AN AREA OF HIS FOOT.
3 de julio de 2003PR · Metal/No metálicoOperador de bulldozer, Operador universal, Operador de equipo pesado, Ingeniero operadorRESBALÓN O CAÍDA DE PERSONA
THE EMPLOYEE ALLEGES THAT WHILE HE WAS CLIMBING ONTO THE BULLDOZER, AS HE GRABBED ONTO IT HE FELT A PROFOUND PAIN IN HIS RIGHT HAND WHICH MADE HIM LOSE HIS BALANCE. HIS RIGHT HAND IS VERY SWOL LEN AND HE FEELS A LOT OF PAIN. HE CANNOT CARRY ANYTHING THAT IS TOO HEAVY WITH THAT HAND.
2 de abril de 2003PR · Metal/No metálicoEncargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campoMAQUINARIA
THE EMPLOYEE ALLEGES THAT WHILE HE WAS INSTALLING A RADIATOR THE JACK HE WAS USING SLIPPED AND FELL ON HIS LEFT MIDDLE FINGER.
2002 · 4 incidentes
9 de septiembre de 2002PR · Metal/No metálicoEncargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campoHERRAMIENTAS MANUALES (SIN MOTOR)
THE EE WAS INSTALLING A MOTOR MOUNT IN A TRACK DRILL WITH A JACK. THE JACK SLIPPED AND THE MOTOR FELL, CUTTING HIS LT. HAND MIDDLE FINGER AND HIS RT. HAND THUMB. (WE DON'T HAVE FACILITIES FOR THIS KIND OF JOB).
THE EMPLOYEE WAS DRIVING A TRACK DRILL UP A HILL, THE EQUIPMENT ALMOST TIPPED OVER, HE JUMPED OFF FALLING ON A LOOSE ROCK HURTING HIS LEFT KNEE.HE FEELS A LOT OF PAIN ON HIS LEFT KNEE.
10 de mayo de 2002PR · Metal/No metálicoObrero, Herrero, Cuadrilla, Mensajero de repuestos, Peón, Recolector, Operario de minaMANEJO DE MATERIALES
THE EE WAS PAINTING AN OFFICE, HE WAS STANDING ON A LADDER WHEN HE LOST HIS BALANCE AND FELL. HE INJURED HIS WAIST. HE CLAIMS TO BE IN ALOT OFPAIN ON THE BACK SIDE OF HIS WAIST.
For insurers, brokers, and safety consultants
The full compliance file on Cantera Dorado Pta 1
A dated report covering the 26-year penalty trail, line-item violation pattern, contest and
docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF
with the underlying data as CSV.