Central Stone Portable Pl#1 (CS48): 24 citaciones de la MSHA Metal/Non-Metal

Employee alleges was moving cover bolts from a wiper motor and then EE grabbed the attach handle and fell causing a small fracture to EE's left pinky finger.

Employee alleges EE was changing bucket teeth on a loader and EE tried to tap the end of tooth with a hammer. A small piece of metal came off the tooth striking EE in the chest. EE had surgery on 09/14/2020 to remove the piece of metal.

Employee alleges they were changing oil in feeder and stood up and felt a sharp pain in lower back.

Employee alleges he was on the chute and the door flip open pinning his right thumb between the door and he cut his right thumb. He received stitches.

EMP ALLEGES HE WAS LOOSENING BOLT ON ROLLER ON CONVEYOR BEL WHILE CONVEYOR WAS ON. WRENCH GOT HUNG ON BELT SMASHING HIS FINGER BETWEEN WRENCH AND PIECE OF ANGLE IRON.

EE ALLEGES HE WAS ADJUSTING A CONVEYOR BELT TAIL SECTION, THE BAR WAS CAUGHT IN TROUGH IDLER. THE BAR PULLED HIS HAND INTO THE ROLLER AND CAUGHT HIS RIGHT INDEX FINGER BETWEEN THE ROLLER AND B ELT.

EE WAS LOADING PIT TRUCK, BUCKET CAUGHT THEN RELEASED CAUSING LOADER TO ROCK BACK AND FORTH, HE HIT HIS HEAD ON BACK WINDOW AND ALSO ON ROOF OF CAB.

EMPLOYEE WAS SORTING SCREENS, THEY WERE STACKED VERTICALLY AGAINST THE TRAILOR WALL. HE MOVED THE FIRST SCREEN AND THE REST OF THE STACK CAME DOWN AND PINNED HIS LEG AGAINST THE SCREENS ON THE OPPOSITE WALL.

EE WAS STADNING ON THE MAIN FRAME OF THE CONE CRUSHER WHEN HE STARTED DOWN HE CAUGHT THE LEFT LEG OF HIS COVERALLS ON THE PLANT HE STEPPED OFF WITH HIS RIGHT LEG AND WHEN HIS RIGHT LEG REACHED THE GROUND HIS KNEE BUCKLED UNDER HIM.

EMPLOYEE WAS WALKING UP TO TRUCK SCALE AND TRIPPED ON DIRT COVERING ACROSS SCALE END AND FELL DOWN CUTTING HIS PALM AND THUMB.

EMPL PUTTING STEEL IN DRILL AND PUSHED FEED THE WRONG WAY,CUT THE END OF HIS FINGER.

EMPLOYEE WAS STRINGING BARB WIRE OFF SPOOL. SPOOL SLIPPED DOWN AND AS IT WAS STILL SPINNING, IT CUT HIS THUMB BEFORE HE COULD GET OUT OF THE WAY.

EMPLOYEE WAS TAKING SHUTE OUT WHEN IT SLIPPED SMASHING HIS THUMB BETWEEN CHUTE AND TAIL PULLEY.EMPLOYEE USED A VACATION DAY AFTER HE CUT HIS THUMB AND CAME BACK TO WORK.

EMPLOYEE WAS WALKING FROM ONE PART OF PLANT TO ANOTHER ON A SLIGHT INCLINE. HIS FOOT SLIPPED FROM OUT OF UNDER HIM, CAUSING HIS LEGS TO SPREAD APART GIVING HIM PAIN FROM EXTREME LOWER BACK ARO UND TAIL BONE.

EMPL WAS REPLACING BELT ON CONVEYOR & WAS CLIMBING DOWN TO HELP PULL BELT ON CONVEYOR WHEN HE PULLED MUSCLE IN BACK.

EMPL WAS INSTALLING BOLTS IN SKIRT BOX WHEN WRENCH SLIPPED OFF NUT AND HIS HAND HIT JAGGED EDGE OF 1/4" STEEL CUTTING HIS L FINGER

EMPLOYEE WAS SITTING DOWN WELDING CONVEYOR GUARDS ON PLANT. HOT SLAG FELL OFF GUARDS AND INTO HOLE IN SIDE OF HIS BOOT. EMPLOYEE DID NOT SEEK MEDICAL ATTENTION, BUT MISSED WORK ON SATURDAY 8-1 2-89 RETURNING TO WORK ON 8-14-89.

EMPLOYEE LOADING DOZER PARTS IN COMPANY PICKUP, WHILE REMOVING FRONT IDLER FROM FORKS ON FORLIFT, IDLER SHIFTED SIDEWAYS AND CAUGHT HIS FINGER BETWEEN FORK AND IDLER.

EMPLOYEE WAS REPLACING LEAF SPRING ASSEMBLY ON FRONT AXEL OF HAUL TRUCK. HE WAS RAISING THE ENDS OF THE SPRING ASSEMBLY WHILE ANOTHER EMPLOYEE,INSTALLED THE RETAINING BOLTS. HE HAD ALREADY R AISED AND BOLTED ONE END AND WAS RAISING THE OTHER END SO IT COULD BE BOLTED IN PLACE WHEN HE FELT SOMETHING GIVE IN HIS BACK.

EMPLOYEE WAS LIFTING DRILL STEEL TO PUT IN PLACE AND PULLED HIS SHOULDER AND NECK MUSCLES

EMPLOYEE WAS WA5KING TO HSOP TO ET TOOLS TO REPAIR WATER PUMP WHEN HE STEPPED ON AN AIR HOSE ON AN INCLINE IN TRYING TO BREAK HIS FALL HE LANDED ON HIS RT HAND CATCHING HIS FINGER ON THE EDGE OF A BUCKET PR9SSING HIS FINGERS BACK

EMPLOYEE WAS LA2ING ON CONVEYOR REMOVING BOLTS,CONVEYOR BECAME OVER CENTERED AND SNAPPED THE TWO(2) REMAINING BOLTS HOLDING CONVEYOR.CONVEYOR TIPPED THROWING EMPLOYEE OFF AND HE LANDED ON ANOT HER CONVEYOR BE5OW,HIS BACK.

EMP WAS WORKING3ON 769C CAT TRUCK HJE STEPPED ON STEP TO GET UP ON FRONT BUMPER OF TRUCK AND TWISTED HIS BACK