Coalinga Pit Metal/Non-Metal

EE1 was picking up tools from his work area on the lower east side cat walk of primary #2 screen when EE2, who was located on the upper cat walk of Primary #2, picked up a swing gate he was installing. When EE2 picked up the gate it came apart in two pieces, one piece falling down and striking EE1 in the nose. EE1 suffered from a laceration on his nose.

Employee was fabricating a steel chute performing cutting, welding, and grinding activities. The employee was in the chute squatting or kneeling for most of the shift except to stop for breaks. There was no one event that caused the injury, it seems to be from cumulative work throughout the day. His knee did not start to swell and become painful for a few days over the weekend.

At the end of shift on 5-10-11 EE removed glasses to wipe his face off and got dust in his eye. EE flushed his eye out before going home and felt that his eye was ok. On 5-12-11 EE woke up and his eye was red and inflamed; EE was taken to the clinic where a foreign object was removed and antibiotic drops were prescribed.

While EE1 was holding the bottom of one side of the head pulley drive guard, EE2 lifted the other side, causing the guard to smash EE1's left 4th finger. Laceration to finger

EE was loading trucks and moving 1X4 material with the 980H loader all day. After work his fingers on his right hand started getting numb. He called his Dr. and they told him to contact his employer because they thought that it was a work related injury possibly carpultunnel.

Employee was cutting a 1/2 inch air hose off of a reel. The knife he was gutting it with slipped and the emoplyee cut his right index finger.

Employee was removing polyurethane screen panels from the dewatering screen; when screen came loose, screen popped out and disloadged a rock. Dislodged rock hit and entered employee's right ear.

Employee was changing screens; while changing screens employee twisted and hurt lower back.

EE was using porta power (Jack) to spread slat conveyor; block slipped and porta power jumped up and hit EE on the upper lip, cutting upper lip.

Walking around the screen catwalk and misstepped on slopped catwalk.

EE was sweeping a concrete slab, when the metal handle on the broom folded. EE continued to use the broom when the damaged area on broom pinched his left pinky finger (tip) and caused a laceration that required seven stitches.

Injured Worker (IW) picked up crane's outrigger pad from squatting position, stood up and took 3 steps while turning to his left when he felt a 'pop' in his low back. IW sustained a muscle strain in low back.

INJURED WORKER (1W) WAS REPLACING CONVEYOR 26 HEADPULLEY GUARD OVER "V"-BOLTS FROM A STANDING POSITION WHEN HE NOTICED IRRITATION AND DISCOMFORT ON HIS LEFT KNEE.

INJURED WORKER ATTEMPTED TO DISCONNECT AND REMOVE 2 30' SECTIONS OF 8" DIA ALLUMINUM IRRIGATION PIPING, TO ALLOW A DOZER TO PASS THROUGH AREA. ON THE SECOND SECTION OF PIPE, ONE OF THE JOINTS WERE STUCK. THE IW LIFTED THE FREE END, PLACED IT IN A HEADLOCK POSITION WITH HIS RIGHT ARM AND MOVED SIDE TO SIDE WHILE PUSHING AWAY FROM THE STUCK JOINT. SUFFERED A HERNIA.

EE WAS ENTERING CHUTE BELOW #1 SCREEN OF PLANT WHEN HE LOST HIS BALANCE. HIS LEFT FOREARM STRUCK AGAINST THE ACCESS FRAME WHICH HAD BEEN SHARPENED BY MATERIAL.

EMPLOYEE CHOSE TO DISREGARD COMPANY POLICY OF WEARING SAFETY GLASSES WHEN EXPOSED TO AN EYE HAZARD. HE WAS CHECKING THE SCREENS OF THE #2 SCREENDECK AT THE BASE PLANT. GUSTY WINDS CAUGHT THE S TEEL DOOR WHICH ACCESSED THE BOTTOM END OF THE SCREEN DECK. THE DOOR SLAMMED SHUT AND DISLODGED SMALL PARTICLES FROM SCREEN HE WAS LOOKING UP ATAND DUST PARTICLES ENTERED HIS RIGHT EYE.

LADDER WAS NOT COMPLETELY SECURED THE TOP OF THEEXTENSION LADDER WAS JARRED AND LOCKING MECHANISM CAME LOOSE AND SLID DOWN, SMASHING HAND BETWEEN STATIONAY RUNG AND SLIDING RUNG.

EE FAILED TO INSPECT GAS HOSES PRIOR TO PERFORMING CUTTING OPERATION.

THE LABORER HAD AN ALLERGIC REACTION TO LAQUER THINNER HE WAS USING TO CLEAN PAINT GUN.

55061S CUTTING FLASHING OFF OF A RUBBER BELT TO MAKE A CLEAN SPLICE WHEN THE KNIFE SLIPPED FROM THE BELT AND CUT THE INNER LEFT THIGH.

WHILE CLEARING A BLOCKAGE ON A TRANSFER CHUTE A LABORER CUT HIS THUMB ON A ROUGH EDGE AT THE CHUTE OPENING.

STANDING ABOVE HOPPER,HANDRAIL BROKE AND EMPL FELL IN HOPPER.

PULLEY ROLLED OVER FINGER WHILE INSTALLING BEARING- FRACTURED INDEX FINGER.

HE WAS CARRYING3ANUIS FOR IMPACT CRUSHER & TRIPPED ON BANDS WHICH HELP THE ANUIS ON PALLET.

THE INJURED EE 4AS REPAIRING THE #3 SCREEN. DURING THE REPLACEMENT OF T HE V-BELTS THE #6 SCREEN BEGAN TO OVERLOAD. THE PLANT OP ATTEMPTED TO S TOP THE FEED TO THE #6 SCREEN & INADVERTANTLY STARTED THE #33SCREEN. THE INJURED EE HAD DE-ENERGIZED THE CIRCUIT HE BELIEVED HE WAS GOING TO WORK ON & LOCKED IT OUT. HOWEVER THE WRONG CIRCUIT WAS DE-ENERGIZED.

CLEANING UNDER FEEDER ROCK FELL OFF FEEDER STRIKING BACK OF RIGHT HAND REQ STITCHES.

JOSEPH NUNZIATO DRIVER OF 769 CAT END DUMP WASEN ROUTE TO ROCK PLANT FROM HOT PLANT 4 MIN HAUL AT THE TIME CRANE WAS BEING MOVED TO THE PLANT WHILE THE BOOM WAS OVER THE ROAD CAT END DUMP RETU RNED AND DID NOT SEE THE BOOM