Tracy Pit: 61 citaciones de la MSHA Metal/Non-Metal

AFTER CUTTING POLYLINERS FOR THE GRIZZLY WITH A SKILL SAW, HE RETRACTED HIS BODY OVER THE LENGTHOF THE LAST CUT. THE SAW WAS OUT OF THE CUT, ON ITS SIDE WITH GUARD FULLY EXTENDED. HIS HAND & FINGER WERE PLACED OVER THE TRIGGER BUT THE SAW WAS NOT IN MOTION, AS HE RETRACTED THE SAW WAS ACTIVATED & CUT INTO HIS KNEE.

INSTALLING CONVEYOR, CABLE SMASHED FINGER AGAINST METAL CUT AND BROKE LEFT RING FINGER.

WORKER WAS FEELING FOR GREASE FITTING TO SERVICE MACHINE MOTOR. HAND SLIPPED INTO MOTOR FAN. CUT LEFT LITTLE FINGER.

WORKER WAS ON 3RD RING OF STEP LADDER, LOST HIS BALANCE AND HAND SLIPPED INTO CONVEYOR.

WHILE OPENING PACKAGE WITH RAZOR KNIFE, KNIFE CUT THROUGH PACKAGE INTO LEFT INDEX FINGER.

WAS WELDING A NEW SCALE DECK ON. HE STEPPED ON CHIPPING HAMMER.

WHILE GRINDING ON THE SKIP LOADER SCRAPER A PIECE OF STEEL, MAY HAVE BEEN ON HANDS OR IN HIS EYE BROW NOT REALLY SURE BUT WENT INTO THIS EYE. HE WAS WEARING SAFETY GLASSES BUT NOT A SHIELD.

66929NG ON THE WATERPULL, HIS FOOT SLIPPED BETWEEN THE HAND FOOT RAIL AND THE FRAME HE FELL ON HIS SHIN AND CUT IT ON THE EDGE OF THE METAL.

HE WAS REMOVING GUARD FROM SCRUBBER TO SERVICE IT. HE ENEDED UP DROPPING THE GUARD AND IT BOUNCED UP AND MASHED HIS FINGER AGAINST SOME STEEL.

TRAVELING FORWARD RAN OVER WIND-ROW CAUSING EQUIPMENT TO ROCK WHICH CAUSED EMPL TO PLACE ALL OF HIS WEIGHT ON RIGHT ELBOW.ARM WAS SETTING ON ARM REST,CAUSING PAIN IN SHOULDER.

WHILE REPLACE SHUB PULLEY EE OVER EXTENDED HIMSELF CAUSING PULLED MUSCLE IN LEFT SHOULDER.

EE WAS BASRRING OUT BUILD UP OF MATERIAL IN CHUTE WHEN PIECE OF MATERIAL GAVE WAY AND CAUSED BAR TO KICK UP AND HIT EE ON RIGHT EYE.

WHILE EMPL WAS SWITCHING ELECTRICAL SWITCH BOX IT EXPLODED CAUSING BOX DOOR TO OPEN & HIT EMPL ON RIGHT SIDE OF CHEST KNOCKING HIM DOWN.

EMPLOYEE WAS HELPING STRIPPING CREW WITH ITS CHOKERS TO PULL OUT SOME EQUIPMENT THAT GOT STUCK IN THE MUDDY SECTION OF THE STRIPPING AREA. GOING BACK TO HIS WATER TRUCK, HIS RIGHT LEG WAS TWIS TED WHEN THE GROUND GAVE WAY AND HIS FOOT SANK INTO THE GROUND.

OPERATOR WAS GOING THROUGH THE FILL & HIT A R OUGH SPOT WI TH CLODS T HE SCRAPER BOUNCED & HE RUPTURED HIMSELF

WHILE RUNNING POWER DRILL THE MOTOR DRILL BIT CAUGHT IN MATERIAL AND KICKED DRILL HANDLE INTO OPERATORS LIP.

WHILE WELDING ON DECK REPAIRING BAD CROSS MEMBERS EMPLOYEE WAS IN BAD POSITION BY HIMSELF AND PULLING ON PIPE WHICH ROTATED HIS PELVIC. THIS ACTIVITY CAUSED HIS MUSCLES AROUND AREA TO BECOME T IGHT.

NUT STUCK IN SOCKET, STUCK FINGER INTO NUT TO GET OUT AND ACCIDENTLY HIT TRIGGER AND SCREWED NUT ONTO FINGER.

LIFTING TOP PLATE OFF OF IMPACTOR AND SMASHED MIDDLE FINGER ON LEFT HAND.

HE WAS PRYING A SCREEN IN PLACE WHEN THE SCREEN CLOTH BROKE THE PRYBAR SLAMMED ME IN THE TEMPLE CUTTING ABOVE MY EYE

WHILE OPERATING LOADER, HARD HAT CAUSED DETERIORATED CARTILAGE PAD IN NECK.

REMOVING BUCKET LINES FROM LOADER EQUIPMENT USING COME- A LONG TO PULL UP ON LINER WHILE CUTTING IT LOOSE. CUT LAST WELD AND LINER POPPED UP AND HIT HIM ON THE NOSE AND RIGHT FOREARM.

GRIZZLEY FEEDER WAS PLUGGED AND MAN WAS SIGNALING LOADER TO PUSH IT OUT. ONE OF THE BARS ACROSS THE FEEDER CAME UP AND LANDED ON HIS FOOT. INJURED WAS STANDING TO CLOSE TO THE FEEDER.

WHILE IN THE PROCESS OF UNLOADING PLANT EQUIP THAT HAD ARRAIVED ON A LOW BED TRUCK EMPLOYEE WAS STANDING ON LOW BED TRAILER NEXT TO EQUIP WHEN LOAD SHIFTED & EMPLOYEE JUMPED APPROX 31/2FT TO G ROUND & TWISTED KNEE LOAD DID NOT FALL IT WAS STABELIZED BY STRAPS TYING LOAD DOWN

REMOVING ROCK FROM S CREEN ROCK GOT LODGED HE WAS BELOW ROCK WHEN ROCK CAME THRU IT ROLLED ON L HAND

MAN WAS U SING A UTILITY KNIFE TO CUT A CONVEYOR BELT & KNIFE SLIPPED & CUT INDEX FINGER OF LEFT HAND HE WAS TRYING TO TAKE TOO BIG A CUT WHICH CAUSED THE KNIFE TO SLIP

SEVERE PAIN DUE CULIM ANTION OF MANY DAY S OF DRIVING WATEER TRUCK AT PIT WENT OT GET INTO VEH.. PAIN WAS INTENSE.

WHILE REPAIRHNING SCREEN HE BURNED ROPE IN TO THAT WAS SECURING TOP OF LADDER THAT HE WAS STANDING ON AND LADDER SLIPPED AND THE MAN FELL APPROX. SIX SEE AND INTO THE HOPPER HE WAS WORKING ON.

WORKING IN TEMPERATURE OF 100 DEGREES AND MORE WORKING TOO FAST AND NOT DRINKING ENOUGH WATER.

EMPLOYEE WAS GETTING OFF OF A 631 SCRAPER AND STEPPED ON A LOOSE ROCK AND SPRAINED HIS LEFT ANKLE.

COMMUNICATION B9EAKDOWN BETWEEN PLANT SUPT AND I.NAME LEAD TO EMOTIONAL EXCHANGE OF WORDS BETWEEN THE TWO.VISITED DR WHO ADVISED REST AND A FEW DAYS AWAY FROM JOB TO RELIEVE STRESS/ANXIETY RES LTING FROM EVEN7.

CHANGING SCREEN8 ON TOWER KNEELED DOWN TO CHANGE SCREEN & KNEE LOCKED UP OR IT WAS TWISTED

MAN WAS INSTALL3NG CUTTING EDGE ONTO LOADER AND WAS HOLDING BOLT WITH LEFT HAND.USING AN IMPACT GUN IN RIGHT HAND. BOLT STARTED SPINNING WHEN NUT WAS TIGHTENED WITH GUN AND CUT FINGER.

HE WAS WORKING ON CONVEYOR REMOVING SPILLED MATERIAL WITH SHOVEL AND THREW BACK OUT WHEN SHOVEL STRUCK ROCK IN PILE

EMPLOYEE WAS USING JUST METER TO CHECK WIRING ON CONVYERO C6 WHEN A WIRE CAME OUT OF CIRCUIT AND BREAKER AND SHORTED TO INCOMING LINE THIS CAUSED BURNS TO FACE EYES AND HANDS .

A PIECE OF SLAG FROM WELDING FLEW OFF & HIT HIM IN THE EYE WHILE HE WAS USING THE CHIP HAMMER ESTAMETED DIDABILITY 24 HOURS

WHILE HOLDING A CLEANING BAR AGAINST PULLEY WIPER HE LOOKED THE OTHER WAY & BELT GRABBED BAR & PINCHED FINGERS BETWEEN FRAME & BAR. COMPOUND FRACTURE OF LEFT HAND LACERATION OF LEFT RING & LIT TLE FINGER HE HAD TO GO BACK FOR SURGERY ON FINGERS