Dolcito Quarry Metal/Non-Metal

Employee was using a razor knife to remove old lagging from a conveyor tail pulley when the knife slipped and cut employee's left bicep. Employee sought medical attention, received 7 sutures and was released to full duty.

Employee was cutting an area of steel hopper with a torch when a piece of hot steel slag fell into clothing and burned left thigh and genital area. Employee sought medical attention and was placed on restricted work duty.

Employee was operating a pneumatic impact wrench from the sitting position. The 1/2 inch air line KC nipple came loose from the quick connect fitting. The air line struck the employee in the groin area.

Employee was changing wires on the middle deck of a screen. He turned to exit and grabbed the hand rail when it gave way, resulting in him falling and striking his head. He sought medical attention and received sutures in his head. He was released to restricted duty

Employee was removing screen cloth from a delivery pallet to a screen rack when his arm came in contact with an adjacent wire with a raw edge, cutting his arm. He received stitches and was released to full duty the same day.

Employees were attempting to clean rocks from punch plate holes, striking rock with a hammer causing fly rock. A piece of rock struck injured on nose. He did seek medical attention; however, when he began having difficulty breathing decided to be checked by the company Occupational Health doctor. Forwarded to an ENT for further evaluation. Surgery 2/11/2009.

Employee and coworker were trying to bolt holes on the ridged plastic discharge pipe from the quarry pump and connect to the steel discharge manafold on the main pipe. Employee alleges he jammed his left shoulder. After investigation was conducted, claim has now been accepted as a compensable claim.

Employee was climbing stairs on loader after fueling. His foot hung on top stair; he tripped and lost balance, falling into handrail.

Employee was putting a section of new belting into a conveyor belt. While attempting to cut the old belt using a straight edge and razor knife along the straight edge, it slipped and cut his right index finger.

Employee was lifting idlers into place on top section tail pulley of conveyor. Injured his back, resulting in back/leg pain, day following the incident. Didn't realize injury immediately and did not notify supervisor. On vacation 5/17-5/23 went to personal physician; had an epidural. Risk Mgmt conducted investigation; accepted claim 6/08/06.

2 employees were attempting to load troughing rollers onto a service truck for repairs. Co-worker was placing the roller onto the truck, the injured employee yelled to hold up caused the injured employee to get his left ring finger caught. He pulled his finger out; peeling his nail off and received a fracture and laceration to end of finger.

CONTRACTOR EMPLOYEE WAS WORKING ON A CRANE AT THE SHOP WHEN FLYROCK FROM A BLAST ENTERED HIS WORK AREA. EE WAS STRUCK BY A SMALL ROCK THAT CAUSED A LACERATION REQUIRING SIX SUTURES.

EE HAD REMOVED A C.B. BRACKET FROM OLD LOADER. WHEN HE CLIMBED DOWN LADDER ON THE LAST STEP TO GROUND. HE STEPPED INTO AN UNEVEN WASHED OUT TRENCH CAVERED WITH KUDZU.

EE ALLEGES THAT CO-WORKER ENGAGED EMER STOP ON CONVEYER BY ACCIDENT, WHERE UPON EE WALKED ON CONVEYER TO RESET EMER STOP, EE ALLEGES THAT CONVEYER STARTED UP AND HE WAS THROWN FROM HIS FEET IN TO GUARD ON BOX INTERSECTION. EE DID NOT DE-ENERGIZE EQUIPMENT BEOFRE RESETING.

EE WAS USING HIS HANDS TO FREE ROCK THAT WAS JAMMED BETWEEN GRIZZLY BARS AT FEEDER UNDER PRIMARY CRUSHER.

EE WAS DIGGING MATERIAL OUT OF THE TUNNEL AT THEPUGMILL PLANT. A GAS POWERED PUMP WAS BEING USEDTO PUMP OUT WATER. EE WAS OVERCOME BY EXHAUST FUMES FROM PUMP BEING USED TO PUMP WATER FROM THE TUNNEL.

EMPLOYEE'S HAND WAS PINNED BETWEEN METAL SCREEN DECK & SCREEN SIDE PLATE AS HE WAS ATTEMPTING TO MANUALLY POSITION THE DECK FOR INSTALLATION. THE DECK LODGED AGAINST MATERIAL ON THE WALKWAY WH ILE SUSPENDED BY HOIST & COME-ALONG.

EMPLOYEE HAD FUELED LOADER. WHILE CLIMBING DOWN LADDER ON LOADER A BEE LANDED ON EMPLOYEE'S FACE. WHEN EMPLOYEE TRIED TO KNOCK BEE OFF HIS FACE, HE SLIPPED AND FELL, STRIKING SHIN ON LADDER.

EMPLOYEE WAS CHANGING/PULLING WIRE ON BOTTOM DECK OF SCREEN & FINISHING PLANT.

ATTEMPTING TO ACCESS TOP OF CONVEYOR; (NO ACCESS STEP PRESENT); UNJURED/STEPPED APPROX 36" TO ATTEMPT TO CLIMB ON TOP OF CONVEYOR #2 FEEDER #1 TUNNEL. FELT STRAIN FROM EXERTION.

PICKED UP PLATE AND STARTED WALKING THE PLATE IN THE GRAVEL. AS THE PLATE STARTED SLIDING, THE WEIGHT SHIFTED AND HE TRIED TO PUSH THE PLATE BACK UP.

VICTIM AND REPAIR CREW WERE FINISHED THEIR SHIFT AT WORK. THEY WERE IN THE SHOP CLEANING UP AND WASHING THEIR HANDS WHEN SOMEONE PUSHED THE BUTTON TO CLOSE THE SHOP DOORS. AS THE DOORS WERE SL OWLY COMING DOWN, SOMEONE SAID THE DOOR WAS GOING TO HIT A PARKED TRUCK. EMPLOYEE RAN TO STOP THE DOOR. THERE WAS OIL LEAKING FROM CYLINDER IN THE DOORWAY, EMPLOYEE SLIPPED ANF FELL IN.

WHILE INSPECTING CRUSHER IN TOWER 3, THE INSPECTION DOOR BEGAN TO CLOSE. EE TRIED TO CATC/STOP THE DOOR (75-100#). INJURED HIS RIGHT HAND--BETWEEN HIS THUMB AND FIRST FINGER. LACERATION REQUIR ED 14 STITCHES/SUTURES WITH IMMOBILIZATION SPLINT.

EE CUT RT. FOREARM ON PROTRUDING METAL WHILE SHOVELING/DIGGING OUT FEEDER IN 410 TUNNEL WITH A SHOVEL.

EE HAD A PERIODIC SCREENING CHEST X RAY READ BY 2 "8" READERS USING THE ILO PROCEDURES THE X RAY WAS CHARACTERIZED AS CONSISTENY WITH PNEUMOCONIOSIS WITH READINGS OF 1/1 AND 2/2. DAMAGE OR IM PAIRMENT CANNOT BE DETERMINED BY READING CHEST X RAY ONLY THE REPORT IS BEING SUBMITTED TO SATISFY MSHA PROGRAM POLICY LETTER P92 III-2

95149ED WAS LOADING WIRE SCREEN CLOTH ONTO PICK UP TRUCK AND BROUGHT HIS ARM DOWN OVER A CRIMPED AREA OF CLOTH AND RECEIVED A LACERATION TO RIGHT ARM.

THE EMPLOYEE WAS WITH THE FOREMAN @ THE ENTRANCE TO THE PIT. IT APPEARS THE ROCK IN QUESTION WAS THE ONLY ONE TO LEAVE WHEN THE SHOT WAS DETANETED AND TRAVELLED APPROX 1200 FT. AND STRUCK THE EMPLOYEE IN THE SIDE CRACKING SOME RIBS MSHA WAS NOTIFIED LOCALLY OUT OF THE B'HAM ALA OFFICE.

EMPLOYEE STEPPED OFF THE TRACKS OF A BULLDOZER AND TWISTED HIS KNEE.

A LACERATION OCCURRED WHEN AN EMPL TRIED TO LOOSEN THE BALL ON CRANE CABLE THE EMPL SHOOK THE BALL AND A BAR HOOKED TO CABLE HIT THE EMPL IN THE CHIN CAUSING A SMALL CUT

EMPLOYEE WAS CLEANING TUNNEL. STEPPED ON ROCK AND TURNED ANKLE.

EMPLOYEE WAS LOADING TRUCK STEPPED IN CRACK & STRAINED LEFT ANKLE

EMP. WAS LOADING BAGS ON CUSTOMERS TRUCK STEPPED THROUGH HOLE IN TRUCK BED. BOTUSION OF FOOT.

EMPLOYEE WAS REPAIRING SCREEN ROCK FELL AND HIT FOOT.

EMPLOYEE WAS USING BELT KNIFE TO REMOVE BELTS FROM CRUSHER. KNIFE SLIPPED AND CUT FINGER.

EMP WAS PICKING3UP DRILL HAMMER & PULLED BACK

EMPLOYEE WAS CH9CKING ROLLERS ON CRUSHING MILL. DOOR ON MILL HOUSING CLOSED & CAUGHT RIGHT HAND. FRACTURE MIDDLE PHALANX RIGHT MIDDLE FINGER. LOCERATION RIGHT INDEX MIDDLE & RING FINGER.

EMPLOYEE WAS DR3VING LOADEER UP HILL. HE LOST CONTROL OF LOADER AND JUMPED OFF. WHEN HE JUMPED CAUGHT HAND BETWEEN CAGE AND LOADER FRAME.

EMPLOYEE WAS LIFTING DRIVE SHAFT IN 475 MICHIGAN LOADER. STRAINED BACK MUSCLE

EMPL PULLING ROPE UP AND DOWN-WEIGHT ON END OF ROPE-TO BREAK ROCKS LOOSE IN CRUSHER.AT THE TIME HAD NO PROBLEM.THIS NIGHT EXPERIENCED PAIN IN LEFT SHOULDER.SHOULDER STRAIN.

EE WAS ATTEMPTING TO UNCHOKE ROCKS IN CHUTE. WAS USING STEEL BAR TO LOOSEN ROCK. CAUGHT HAND BETWEEN BAR & ROCK. FRACTURE OF LEFT 4TH METACARPAL & 3RD DISTAL PHALANX.

WHILE CHANGING PART ON DRILL CUTFINGER IN DRILL PART.

STARTING AIR COMPRESSOR EMPLOYYEE CUT FINGER ON AIR COMPRESOR GUARD.