Junction City Plant Metal/Non-Metal

Maintenance Mechanic working on a bearing to a fan completed the repairs and was re-installing a pulley guard, the guard got stuck and as the Mechanic pulley on the guard to free it to complete the installation EE's (R) ring finger and pinky finger got pinched between the guard and the fan. Causing a fracture to the tip of EE's ring finger.

Employee has a confirmed STS in EE's left ear that has results in a loss of hearing >25dB

Operator heard an unoccupied CAT D6T dozer sound as if it was trying to start, detected smoke around the starter. After brief observation, any smoldering appeared to stop. After 20 min, flames were noticed and deemed unsafe to contain. Fire was monitored from a safe distance and secured the entrance to the pit

The lead mechanic/electrician reached out to pull electrical wire to place on a pole and heard right shoulder pop. First visit to a medical doctor was Monday 06/07/2021. During this exam the mechanic was placed on restricted duties.

While conducting a spot check for oversize particles in the glass sand screen room, the employee struck left shoulder on a diagonal stationary chute while crossing under it. Danger "Low Head Clearance" signs were in position on both sides of the VS-03,05, 06 chute. Employee first day missed from work was 05/17/2021.

A pipe line had been taken apart, flushed out, and bolted back together. Pump PU-03 was started up to flush the pipe line and water hammer occurred. It ruptured the poly pipe line, the pipe struck one mechanic on the back of EE's right lower leg. The injured employee was medically evaluated and placed on temporary restricted duties.

On 01/24/2020, the mine was informed that its workers compensation insurance deemed and approved a loader operator's right elbow pain as work-related. The loader operator informed the mine operator of the concern on 01/06/2020. Medical treatment was obtained.

On May 03, 2019, former employee reported to the Company that EE had surgery on right foot that EE sprained on EE's last day of employment with Covia. The former employee had reported stepping from a walkway to the ground and felt pain in the right foot. EE was advised to go to the doctor and inform Covia of medical treatment.

On 8/6/19, the employee needed left shoulder surgery was deemed as work related by Workers Comp Ins. On 03/27/19, the employee reported pulling/straining EE's left shoulder on 03/25/19 when climbing a ladder seven time to adjust chemical pumps instead of using stairway. No medical attention needed or requested at the time. Date of first day of lost Time 08/19/2019 due to surgery.

While removing a 2" diameter pipe using a 18" pipe wrench, a 2" connector broke. The pipe which was under pressure broke loose and struck EE on EE's left eye brow causing a laceration. The employee was examined, treated, and eight sutures placed above EE's left eye.

Worker's compensation insurance deemed that it would accept the employee's claim related to injuring their left shoulder at work while opening a water valve at WM-02. Worker's comp approved the claim (informed 9/25/2018). The employee was placed on modified duties.

The employee, a Plant Superintendent with 36+ years of experience is a participant in the Company's medical surveillance program. His most recent chest X-ray, evaluated by a NIOSH certified B reader was interpreted as having radio graphic indications of pneumoconiosis.

Checking oil in Off Road Truck, motor went out that raises the hood.

Employee was operating excavator in the mine (pit). The operator crossed an established berm and was attempting to move clay/kaolinite from the high wall face to access better sand. As he was backing up, he saw the kaolinite caving off. He did not have time to prevent the boulder from striking the excavator cab. The employee was pended in the damaged cab with sand up to both knees.

Injured was handed a 4X4' section of liner from the flat plant attritioner bank (D) and lost his balance. He fell against the attritioner bank (C) which had bolt ends protruding from its side wall. A bolt end lacerated the injureds left forearm requiring 11 sutures.

Employee was changing a metal flange at cyclone number 15 in the flot plant. He removed his gloves to place nuts on related bolts, then lifted the flange before placing gloves back on his hands. The flange had a sharp wear point on the inside which lacerated his right middle finger.

The employee alleged that he aggravated an "existing" lower back problem when lifting a bucket with approx. 25 lbs of wet sand in it. (This claim is being investigated by the workers comp insurance carrier.)

An employee & co-worker were traveling on plant road at less that 15 mph. The driver became unconscious. The vehicle veered to the right and as the vehicle started to strike a berm the passenger placed the vehicle in park. Seat belts were being worn. Incident/Illness not work related. Ambulance transported employee to hospital as a precautionary measure.

Injured went to tighten packing on PU13 at ground level in the plant. He selected a route that involved climbing over 2 pipes. On the second pipe he crossed, he stated he slipped and fell against his right side of back and ribs. Injured reported it the next day.

Injured got on his knees to put a chain around a section of id discharge line. When he went to stand up he felt immedicate pain in right knee.

Employee exited dozer cab by stepping from the dozer track to the blade side brace. His foot slipped from the side brace to the concrete floor in the shop (between track and blade side brace).

EE traveled provided steps and fixed ladder to change valves to divert sand flow from new to old tower. EE took a non access short cut by climbing under handrail to return to main cross over walking from the fine tower to the main wet plant. This short cut would have required walking on a pipe. EE slipped and fell approx. 40ft.

EE was cutting wire strap with a utility knife and cut toward himself. The knife slipped and cut his left forearm.

Employee was using hydraulic pulley puller to remove a bearing from a shaft on a radial stacker wheel. The bolt holding the arm of the pulley sheared and the employee's right hand was struck in the palm.

PICKED UP A JUNCTION BOX AND TORE ROTOR CUFF IN RIGHT SHOULDER

INJURED PERSON WAS REFUELING A DIESEL TANK FOR A PORTABLE PUMP ENGINE. THE GROUND HAD A LAYER OF FROST ON THE GRASS AREA. HE SLIPPED WHILE MOVING AROUND THE PUMP ENGINE. HE CAUGHT ALL HIS WEIGHT ON HIS LEFT HAND AND SPRAINED HIS LEFT WRIST (THE WRIST HAD BEEN INJURED PREVIOUSLY IN A NON WORK-RELATED ACCIDENT).

THE INJURED WAS PLACING A WIRE CABLE SLING ON THE LOADER FRAME AFTER PULLING OUT A STUCK CRANE TRUCK. THE INJURED LIFTED THE CABLE BY ITS EYE WHICH HAD A BURR STICKING UP FROM IT. THE BURR ON THE EYE OF THE SLING LACERATED THE INJURED'S LEFT INDEX FINGER. THE INJURED WAS NOT WEARING GLOVES.

INJURED WAS TRYING TO REMOVE PULSATION DAMPER IN A PRESSURIZED CAUSTIC PIPE. AS THE DAMPENER RELEASED THE LIQUID CAUSTIC SODA GUSHED OUT. THE EE INSTINTIVELY STEPPED BACK AND RAISED HIS ARMS T O PROTECT HIMSELF. THE EE'S HAND STRUCK HIS FACE SHIELD KNOCKING IT UP AND CAUSTIC SPLASHED ON HIS MOUTH.

THE INJURED WAS INSTALLING APPROX. 1" THICK INSULATED MAT BETWEEN WET PLANT ATTRITIONER DISCONNECTS. HE USED A UTILITY KNIFE TO DO THE FINAL TRIM WORK TO FIT MAT AROUND HANDRAIL POST. THE KNIF E SLIPPED AND CUT EE APPROX 2" ABOVE HIS RIGHT KNEE CAUSING A LACERATION.

THE EMPLOYEE UNHOOKED HIS SAFETY HARNESS LANYARD TO CLIMB DOWN THE LADDER THAT HE WAS USING TO REPAIR OVERHEAD FAN. THE EMPLOYEE HOOKED THE LANYARD HOOK ON THE HARNESS CHEST STRAP. THE EMPLOYE E GOT OFF THE BOTTOM OF THE LADDER AND STARTED TO WALK AWAY. THE LANYARD GOT WRAPPED AROUND THIS EMPLOYEE'S KNEE. HE BEGAN TO FALL AND REACHED TO GRAB THE EXTRACTOR SPOCKET GUARD TO PREVENT I

WHILE ATTEMPTING TO CHANGE OUT A STAINLESS STEELBALL VALVE SULPHURIC ACID SPILLED & MADE CONTACTWITH HIS RIGHT HAND & ARM. EE WAS WEARING WORKGLOVES BUT NOT RUBBER GLOVES

THE INJ CUT HIS HAND WHILE USING A POCKET KNIFE TO PLACE A CLIP ON A MASTER LINK ON A 40" CHAIN LOCATED ON A FLOAT IN SUMP #14 IN THE FLOT PLANT

EE WAS CLIMBING OUT OF FLOTATION CELL-02 APPROX 48"X50" IN HEIGHT) AND HIS LEFT FOOT SLIPPED CAUSING A SHARP PAIN IN HIS LEFT KNEE. THE KNEE HAD BEEN OPERATED ON SURGERY PRIOR TO EE WITH THIS CANOPY.

A 6" C VIS GRIP CLAMP WAS BEING USED BY THE MAINTENANCE TEAM TO ASSIST IN THE REMOVAL OF THE GLASS SAND ELECTOR CONVEYOR BELT FRM THE BOTTOM OF THE SILO ELEVATOR. THE VISE CLAMP WAS ATTACH TO THE CONVEYOR INCLUDING A ROPE TO PULL THE BELT FROM THE ELEVATOR. THE VISA CLAMP PULLED LOOSE AND STUCK EE S RIGHT HAND, INJURING HIS FINGERS.

TWO MECHANICS WERE LIFTING A 2"X10" ROD TO PLACE IN UNIT #1 AT THE ROD MILL. THE INJURED LIFTED ONE END OF THE ROD FROM WAIST HIGH CRADLE AND STRAINED HIS LOWER BACK. THE TWO HAD LIFTED 6-8 RO DS FROM THE CRADLE AND PLACED THE RODS IN THE OVERHEAD ROD TUBE. THE TWO MECHANICS DID NOT USE PROVDED ELEVATED PLATFORM TO PREVENT LIFTING OVERHEAD.

THE INJ PULLED LOWER BACK WHILE USING A CABLE RATCHET TO MOVE THE FLOATING MUDCAT

INJURED WAS TAKING COUPLING OFF THE WATER SYSTEM ATTACHED TO THE BARGE ENGINE. HIS LEFT HAND SLIPPED OFF WRENCH AND HIS HAND STRUCK THE BARGE ENGINE. THIS CAUSED A LACEATION TO THE INJURED 3RD FINGER.

THE INJURED WAS USING A WALK BEHIND DITCH WITCH, THAT HAD BEEN RENTED FOR USE TO DIG A TRENCH FOR A UNDERGROUND WATER LINE AND ELECTRICAL LINE. THE DITCH WITCH SLIPPED INTO A DITCH WHILE IN OPERATION, EE OPERATOR TRIED TO STOP THE WALK BEHIND MACHINARY AND INJURED HIS RIGHT WRIST.

EE WAS WORKING ON PLATFORMS AND MOVED TO THE NEXT LEVEL. AS HE WAS WALKING AROUND THE UPPER LEVEL LOOKING AT JOB HE SLIPPED THROUGH A HATCH HE FORGOT TO CLOSE. HE FELL THROUGH THE HATCH AND HI T HIS KNEE WHILE CATCHING THE LADDER.

THE INJURED SLIPPED AND FELL WHEN STEPPING ON A 16" STEEL PIPE AT THE FLOT PLANT EXTRACTOR BELT PLATFORM WALKING. HIS RIGHT FOOT SLIPPED FROM THE PIPE TO THE WALKWAY FLOOR CAUSING HIM TO FALL AGAINST THE HANDRAIL AND THEN TO THE WALKWAY FLOOR. THE PIPE WAS MOUNTED JUST ABOVE THE WALKWAY FLOORING.

INJURED WAS WALKING UP INCLINE CONVEOYR IN THE GLASS SAND SCREEN ROOM. HE BENT OVER TO WALK BENEATH OVERHEAD H BEAM WHICH CROSSED OVER THE CONVEYOR WALKWAY, INJURED STRUCK HEAD AGAINST H-BEAM CAUSING TRAUMA TO THE HEAD AND NECK. HARD HAT AND RESPIRATOR BEING WORN AT THIS TIME.

THE INJURED WAS ROLLING A PIPE THAT WAS IN THE PROCESS OF BEING CUT INTO. HE HAD PLACED A PIPE WRENCH ON THE 10'X10" PIPE TO TURN THE PIPE JUST AS THE INJURED BENT OVER TO ROLL THE PIPE AND TU RN IT, HE EXPERIENCED PAIN IN HIS LOWER BACK.

EE STEPPED IN A SHALLOW HOLE WHILE SPOTTING A TANKE TRUCK BENEATH THE INDUSTRIAL LOADOUT CHUTE.

THE INJURED SLIPPED AND FELL FROM TOP OF ATTRITION BAND CAUSING HIM TO STRIKE THE TOP OF ATTRITIONER BANK WITH HIS BODY (UNDER LEFT ARM).

INJURED WAS HELPING A WATER VALVE AT THE WET PLANT CFS UNIT. WHILE USING BOTH ARMS/HANDS TO PULL WRENCHES ON BOLT/NUTS, INJURED STRAINED A MUSCLE IN HIS LEFT SHOULDER. BOLTS/NUTS WERE RUSTED A ND HAD BEEN PAINTED OVER.

THE INJURED WAS USING AN APPRX 2" DIAMETER WATERHOSE TO WASH DOWN/CLEAN UP AREA. THE INJURED GAVE A SUDDEN PULL ON THE WATER HOSE CAUSED A STRAIN TO THE MUSCLES IN HIS RIGHT SHOULDER & NECK.

SUBJECT WAS FUELING DOZER BY USING THE FUEL TRUCK. HE ATTEMPTED TO CATCH FUEL HOSE NOZZLE WHICH WAS ABOUT TO FALL OUT OF DOZER FUEL TANK SPOUT WHILE FUEL WAS PUMPING. NOZZLE FELL & STRUCK INJU RED ABOVE RIGHT EYE & ON LEFT HAND. FUEL SPRAYEDON INJURED'S BODY & IN RIGHT EYE.

EE WAS TIGHTENING BOLTS ON THE ROD MILL AND THE WRENCH SLIPPED OFF THE BOLT HEAD. A PIPE WHICH THE INJURED HAD PREVIOUSLY PLACED OVER THE WRENCH HANDLE TO GAIN LEVERAGE, STRUCK HIS RIGHT EYEBR OW AREA OFHIS FOREHEAD CAUSING LACERATION.

INJURED PULLED HIS LOWER BACK WHILE LIFTING 100 LB BAGS OF SAND FROM THE BED OF A TRUCK AND PLACING HTE BAGSIN A SMALL TANK APPROX SHOULDER HIGH.

THE VICTIM USED A PRY BAR TO HIT A METAL SLEEVE FOR REMOVAL FROM A SHAFT WHICH WAS ON A PUMP ASSEMBLY. THE PRY BAR WAS RESTING ON THE SHAFT BEARING AND APPROX. 6" MOVEMENTS WAS USED STRIKING T HE SLEEVE. THE VICTIM FELT IRRATATION IN HIS LEFT EYE AND A SMALL PIECE OF METAL WAS FOUND IN HIS LEFT CORNEA.

EMPLOYEE JUMPED OFF A WALKWAY TO RETRIEVE A SMALL SOCKET THAT WAS DROPPED ON FLOOR BELOW. AS HE JUMPED HE GRIPPED THE EXPANDED METAL WALKWAY TO STABALIZE HIMSELF. THE EXPANDABLE METAL CAUSED LACERATION TO THE INJURED'S RIGHT THIRD FINGER.

VICTIM WAS TRYING TO THREAD FOOT VALVE ON A THREADED PIPE WHICH WAS BEING HELD BY A VICE. THE VICTIM, THINKING THE THREAD HAD STARTED, WENT TO TURN THE FOOT VALVE & IT FELL 4-6", MASHING FINGE R BETWEEN FOOT VALVE & VISE.

EE WAS PULLING A SECITON OF 12"X13' PIPE WITH A MAINTENANCE TRUCK WHICH WAS CONNECTED BY A STEEL CHAIN. HE PULLED THE PIPE TO THE AREA BEHIND THE FLOAT WHERE THE VACUUM SYSTEM WAS BEING MOVED TOT HE OUTSIDE OF THE EXISTING BUILDING. HE STOPPED THE TRUCK AND BEGAN TO BACK UP TO RELEASE THE TENSION ON THE CHAIN, IN ORDER FOR IT TO BE REMOVED FROM THE TRUCK AND PIPE. AS HE WAS BAC

ON A NIGHT OF RAIN, THE INJURED WAS ON TOP OF A RAILCAR POSITIONED UNDER THE LOADOUT HOSES OF THE GLASS SAND LOADOUT. WHEN STEPPING OFF THE WALKWAY IN THE CENTER OF THE RAILCARS TO POSITION TH E HOSES. THE INJURED SLIPPED, PULLING A MUSCLE IN HIS NECK WHEN TRYING TO PREVENT A FALL.

INJURED WAS LIFTING APPROX. 5 SHEET OF 1/8INCH X 4INCH X 8INCH SHEET METAL WITH AOVERHEAD CRANE AND A LIFTING CLAMP THE SHEET METAL STRUCK A OF EXPANDED METAL STICKING UP ABOUT THE METAL RACK. THIS CAUSED THE LIFTING CLAMP TO RELEASE A SHEET OF METAL LACERATION THE INURED CHEST STOMACH AREA WHEN FALLING TO THE FLOOR.

A BUNDLE OF RODS WAS BEING LIFTED BY THE CRANE TRUCK BOOM TO THE ROADMILL PLATFORM THE INJURED REACHED FOR THE BUNDLE OF RODS BEING LIFTED TO POSITION THEM WHILE THE BUNDLE WAS IN MOTION THE B UNDLE OF RODS STRUCK AN IBEAM & HE INJUREDS HANDWAS CAUGHT BETWEEN THE TWO OBJECTS DIAGNOSED BY MD AS A BRUISE ONLY BUT PROBLEMS DEVELOPED ON 01-2 5-93 WITH PREVIOUS INJURY A REA OUT PATIENT

INJURED WAS CUTTING A PIECE OF CHANNEL IRON WHICH WAS LAYING ACROSS ATTRITIONER SUMP. AFTER CUTTING THE IRON WITH A TORCH, THE EMPLOYEE PULLED THE IRON TOWARDS HIMSELF AND THE WEIGHT OF THE IR ON MADE THE OPPOSITE END DROP, THROWING THE HOT END UP AGAINST VICTIM'S ARM.

INJURED WAS CUTTING A PLASTIC TIE ON 980 LOADER IN ORDER TO REMOVE OIL-LINE. FORCE HAD TO BE PLACED ON THE POCKET KNIFE TO CUT THE PLASTIC TIE. WHEN THE KNIFE DID CUT THRU THE TIE, THE KNIFE B LADE WENT BEYOND ITS INTENDED DISTANCE AND CUT THE EMPLOYEE'S FINGER.

EE & EE WERE IN PROCESS OF MOVING AN APPROX 125-150LB ROLLER WITH SHAFT & BEARINGS WHICH WAS PRE-ASSEMBLED FROM ONE MAINTENANCE TRUCK TO THEIR COMPANY MAINTENANCE TRUCK EE BEGAN TO PULL ROLLER ASSEMBLY TO THE EDGE OF TRUCK BED & EE GRABBED OPPOSITE END OF SHAFT WITH HIS HANDS ON THE BEARING WHEN THE 8IN ROLLER SLID OFF THE TRUCK BED THE ATTACHED SHAFT BEARING FELL SUDDENLY TO TRUCK

WIND BLEW A PARTICLE OF METAL (RUST) INTO LEFT EYE WHILE AT SHOP AREA.

THE TRUCKDRIVER OF A CHEMICAL SUPPLIER HAD PUMPED A LOAD OF CAUSTIC INTO FLOAT PLANT STORAGE TANK. THE HOSE HAD BEEN UNHOOKED FROM THE TRUCK TANK AND THE STORAGE TANK WAS LAYING ON THE GROUND. THE FLOAT PLANT OPERATOR SAW THAT THE TRUCK DRIVER WAS EXHAUSTED BY THE HEAT AND TOLD HIM TO GO IN THE BREAKROOM TO GET COOLED OFF. THE FLOAT PLANT OPERATOR PICKED UP THE HOSES TO UNCOUPLE TH

3 LINERS HAD TO BE PLACED IN THE ROD MILL UNIT CHAMBER BY ENTERING THE WEST END OF ROD MILL UNIT. 2 MEN WERE PUSHING THE LINERS IN FROM THE WEST END OF RODMILL AND THE INJURED WAS PULLING THE LINER WHILE BEING INSIDE THE EAST END OF THE UNIT CHAMBER. THE LINER MADE A SUDDEN MOVE WHEN PUSHED AND THE VICTIMS RIGHT HAND WAS CAUGHT BETWEEN THE LINER AND THE KEY STICK MOUNTED ON THE TOP

INJ WALKED TO BAGGING MACHINE AND WAS PLACING EMPTY BAG ON MACHINE SPOUT,FELT PAIN IN LOWER BACK.

50'X4" PIPE WAS BEING MOVED BY A CRANE TO BE ATTACHED TO CYCLONE ON THE HEAVY MINERAL TOWER. THE INJURED'S HAND WAS CAUGHT BETWEEN THE PIPE FLANGE & THE CYCLONE.

I NAMNE & I NAME WERE REPAIRING 12INX18FT POLY PIPE AT THE WET PLANT THE HUGGER COUPLING HAD BEEN REMOVED FROM THE END OF THE PIPE THAT WAS APPROX 15FT ABOVE THE CONCRETE BED & THE OTHER GASKE T WAS LEFT BY THE MEN 5TO HOLD THE PIPE THE END OF THE PIPE AT THE JUMP WHERE I NAME WAS STANDING WAS APPROX 10FT HIGH THE TWO MEN WERE REMOVING THE LAST BOLT FROM THE PIPE RANGE WHEN THE PIP

THE INJURED WAS CLIMBING OVER COUPLED RAILCARS AT THEIR HITCH WITH 2 SODA CANS IN ONE HAND AND HOLDING THE RAILCAR LADDER IN THE OTHER, WHEN HE JUMPED PLACING THE WEIGHT OF HIS BODY ON HIS LEF T FOOT, THE ANKLE WAS SPRAINED.

A BAG FELL OFF THE PALLETIZER; THE INJURED PUT THE BAG BACK IN PLACE. WHEN DOING THIS IT BLINDED THE ELECTRIC EYE CAUSING THE FORKS TO BE LOWERE. THE PALLETIZER FORKS WENT DOWN ON HIS FEET. HE SUFFERED FROM A SMALL BRUISE ON LEFT FOOT & SEVERE BRUISE ON THE RIGHT FOOT. (NO BROKEN BONES) EMPLOYEE FELLED TO CUT PALLETIZING MACHINE OFF BEFORE PLACING THE BAG AS INSTRUCTED & TRAINED TO

THE FUEL TRUCK WAS BEING USED TO PLACE DIESEL FUEL IN THE BULK TANK FOR BARGE FUEL LEAKED FROM THE TANK AREA OR TO THE MUFFLER BENEATH THE TRACK FIRE WAS SPOTTED BETWEEN THE PASSENGER DOOR AND THE REAR TIRES. THE FIRE EXTINGUISHER IN THE TRACK WAS USED ALONG WITH 9 OTHERS THEN THE FIRE DEPT ARRIVED OUT O F 12 15 APPROX. 300 GAL OF D. FUEL BURNT FUEL TRUCK DESTROYED.

THE INJURED WAS LOOSENING BOLTS ON A FOOTVALVE IPIPE IN A SITTING POSITION WITH LEGS AROUND THE PIPE, WHILE SITTING IN THE STRADDLED POSITION THE VICTIM LOST HIS FOOT HOLD AND FELL APPROX. 4 FT., STRIKING THE 24" OVERFLOW PIPE.

THE INJURED WAS3DRIVING A REPLACMENT DOZER OVER MOUND OF DIRT IN THE PIT AND THE STEERING CLUTCH DID NOT REALEASE WHEN THE BRAKE WAS PRESSED TO SLOW THE MACHINERY DOWN HIS HEAD STRUCK THE ROPS ON THE DOZER. 7HE SEAT BELT ON THIS REPLACEMENT DOZER WAS FOUND BENEATH THE SEAT SEAT BELT AND CLUTCH WERE CORRECTED.

THE INJURED WAS3HELPING A TRUCK DRIVER REMOVE TOW END OF CABLE FROM THE LOADER.WHEN THE CABLE MOVED, A BROKEN WIRE ON THE CABLE CUT HIS RIGHT 3RD FINGER. ( THE CABLE WAS STUCK BETWEEN THE HAND HOLD ON THE LOA8ER).

HAND STRUCK SHI4 WHILE LOOSENING RUSTY NUT WITH BOXED-IN WRENCH.

LEFT INDEX FING9R STRUCK BY 8'' X 40' DRISCO PIPE BEING REMOVED FROM CFS UNIT.

INJURED SLIPPED3AND FELL ON A 10 INCH STEEL PIPE THAT HE WAS STEPPING OVER WHEN LEAVING A SUMP THAT WAS OVERFLOWING WITH WET SAND AND WATER DUE TO A HOLE IN A T PIPE ABOVE THE SUMP THE INJURED HAD OPENED A 5ALVE ABOVE THE SUMP IN ORDER TO SHUT DOWN FOR REPAIR OF THE PIPE T

INJ WIPED SWEAT3FROM HIS FACE DDURING THE HEAT OT THE DAY WITH HIS HANDS THAT WERE CONTAMINATED WITH DIESEL FUEL. THIS CAUSED FACIAL BURN, 1ST DEGREE. DIAGNOSED AS CONTACT DERMATITIS

INJURED WAS WAL5ING FROM BARGE TO PIT GUN & TWISTED HIS LEFT KNEE.

INJURED WAS CLIMBING ONTO DOZER AND STRUCK LEFT KNEE AGAINST TRACK OF DOZER. INJURED WENT TO DOCTOR AFTER WORK AND WAS HOSPITALIZED THE FOLLOWING MORNING WITH A SWOLLEN LEFT KNEE.

INJ WAS LIFTING PIECE OF PIPE ONTO COMPANY TRUCK PULLED MUSCLE IN LOWER BACK

THE INJURED WAS GOING TO CHECK ON PUMP AT THE OTHER WET PLANT PAD. HE TRIPPED OVER THE HANDLE OF A CABLE CLAMP WHICH WAS ATTACHED TO A PIPE LINE BETWEEN THE TWO PADS.

GOING TO REPLACE BELTS ON PUMP PULLEY. EMPL LOST CONTROL OF GUARD WHICH FELL ON EMPL LEFT LEG CAUSING IT TO TWIST WHILE TRYING TO MAINTAIN CONTROL.