Mining Incidents

Martin Marietta - Rich Patch Quarry Metal/Non-Metal

Low Moor, Alleghany Condado, VA  ·  Activa
ID de mina MSHA: 4406897

Martin Marietta - Rich Patch Quarry tiene $7K en multas propuestas de MSHA y $55 pendientes en 1 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.

Seguir esta mina

Avísenme cuando se presente un nuevo incidente de la MSHA en Martin Marietta - Rich Patch Quarry.

Muertes
0
Incidentes totales
10
Años en registro
1997–2018
Último incidente
Oct 2018
Historial de cumplimiento
Citaciones de MSHA desde 2000
46
citaciones
10
significativas y sustanciales
$6,521
multas propuestas
$6,458
pagado a la fecha
99% de las multas propuestas pagadas a la fecha, una diferencia de $63.
Fuente: datos de violaciones de MSHA, actualizados semanalmente.
Actividad de inspección
Inspecciones de MSHA desde 2000
66
inspecciones registradas
1,191
horas de inspección
3.9
citaciones por 100 horas de inspección
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.
46 citaciones en 1,191 horas de inspección.
Fuente: datos de inspecciones de MSHA, actualizados semanalmente.

Martin Marietta - Rich Patch Quarry tiene $7K en multas propuestas de MSHA y $55 pendientes en 1 expedientes impugnados.

Disposicion de multas
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.
$7K
multas propuestas
$7K
evaluacion actual
$6K
pagado a la fecha
$55
pendiente
46 evaluaciones son ordenes finales; 1 expedientes impugnados.
Al ultimo periodo de evaluacion el 2023-06-22.
Fuente: datos de infracciones evaluadas y de conferencia/litigio de MSHA, actualizados semanalmente.
Tasas de seguridad trimestrales
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.
Citaciones por millón de horas trabajadas, según lo reportado a MSHA
Trimestre Horas trabajadas Citaciones S&S Por 1M hrs
2025 Q4 2,698 0 0 0.0
2025 Q3 3,018 0 0 0.0
2025 Q2 3,351 0 0 0.0
2025 Q1 1,982 0 0 0.0
2024 Q4 3,015 0 0 0.0
2024 Q3 2,703 0 0 0.0
2024 Q2 2,722 0 0 0.0
2024 Q1 2,455 0 0 0.0
Mostrar 96 trimestres anteriores
Trimestre Horas trabajadas Citaciones S&S Por 1M hrs
2023 Q4 2,985 0 0 0.0
2023 Q3 3,053 0 0 0.0
2023 Q2 3,016 1 0 331.6
2023 Q1 2,359 0 0 0.0
2022 Q4 2,487 0 0 0.0
2022 Q3 2,843 0 0 0.0
2022 Q2 3,071 1 0 325.6
2022 Q1 2,127 0 0 0.0
2021 Q4 3,285 0 0 0.0
2021 Q3 3,160 0 0 0.0
2021 Q2 3,005 0 0 0.0
2021 Q1 3,209 0 0 0.0
2020 Q4 3,522 0 0 0.0
2020 Q3 3,587 0 0 0.0
2020 Q2 3,513 0 0 0.0
2020 Q1 1,966 0 0 0.0
2019 Q4 2,821 1 0 354.5
2019 Q3 3,147 0 0 0.0
2019 Q2 3,167 0 0 0.0
2019 Q1 3,689 1 1 271.1
2018 Q4 4,019 0 0 0.0
2018 Q3 4,456 0 0 0.0
2018 Q2 4,057 0 0 0.0
2018 Q1 3,826 1 0 261.4
2017 Q4 3,588 0 0 0.0
2017 Q3 3,954 0 0 0.0
2017 Q2 4,016 0 0 0.0
2017 Q1 3,911 3 0 767.1
2016 Q4 2,937 0 0 0.0
2016 Q3 3,639 1 0 274.8
2016 Q2 3,738 0 0 0.0
2016 Q1 3,184 0 0 0.0
2015 Q4 3,201 1 0 312.4
2015 Q3 3,156 1 0 316.9
2015 Q2 3,129 0 0 0.0
2015 Q1 2,535 0 0 0.0
2014 Q4 2,992 0 0 0.0
2014 Q3 3,660 1 0 273.2
2014 Q2 1,158 0 0 0.0
2014 Q1 3,179 5 0 1572.8
2013 Q4 2,697 0 0 0.0
2013 Q3 3,054 2 2 654.9
2013 Q2 3,257 0 0 0.0
2013 Q1 3,338 0 0 0.0
2012 Q4 2,421 0 0 0.0
2012 Q3 3,012 0 0 0.0
2012 Q2 3,189 1 0 313.6
2012 Q1 2,818 0 0 0.0
2011 Q4 2,891 1 0 345.9
2011 Q3 3,139 2 0 637.1
2011 Q2 3,061 0 0 0.0
2011 Q1 1,622 0 0 0.0
2010 Q4 3,129 1 0 319.6
2010 Q3 3,407 0 0 0.0
2010 Q2 2,883 0 0 0.0
2010 Q1 2,181 1 1 458.5
2009 Q4 2,148 0 0 0.0
2009 Q3 2,723 0 0 0.0
2009 Q2 2,999 0 0 0.0
2009 Q1 3,032 0 0 0.0
2008 Q4 3,476 0 0 0.0
2008 Q3 3,895 0 0 0.0
2008 Q2 4,052 0 0 0.0
2008 Q1 3,766 2 1 531.1
2007 Q4 3,478 0 0 0.0
2007 Q3 3,820 0 0 0.0
2007 Q2 4,291 0 0 0.0
2007 Q1 3,484 1 0 287.0
2006 Q4 4,083 0 0 0.0
2006 Q3 3,109 1 0 321.6
2006 Q2 3,427 0 0 0.0
2006 Q1 4,273 1 0 234.0
2005 Q4 2,696 0 0 0.0
2005 Q3 3,582 0 0 0.0
2005 Q2 3,710 0 0 0.0
2005 Q1 2,600 0 0 0.0
2004 Q4 3,608 0 0 0.0
2004 Q3 2,530 0 0 0.0
2004 Q2 2,656 0 0 0.0
2004 Q1 1,981 0 0 0.0
2003 Q4 3,271 1 0 305.7
2003 Q3 3,019 0 0 0.0
2003 Q2 3,847 1 0 259.9
2003 Q1 1,875 0 0 0.0
2002 Q4 3,224 0 0 0.0
2002 Q3 3,520 2 1 568.2
2002 Q2 2,062 0 0 0.0
2002 Q1 4,636 0 0 0.0
2001 Q4 2,908 4 0 1375.5
2001 Q3 3,459 1 0 289.1
2001 Q2 5,218 0 0 0.0
2001 Q1 1,606 2 2 1245.3
2000 Q4 4,442 0 0 0.0
2000 Q3 6,050 2 1 330.6
2000 Q2 6,149 3 1 487.9
2000 Q1 3,886 0 0 0.0
No se registran muertes en esta mina.

Incidentes reportables

10 en archivo

2018 · 1 incidente

10 de octubre de 2018 VA · Metal/No metálico Superintendente MAQUINARIA
Boxley Materials Company · Atrapado en, bajo o entre objetos en movimiento o engranados

Superintendent locked out and tagged out the crusher run belt to remove a blockage of material which had stopped the belt. The belt was cut on and off more than once during the process and the v-belts were replaced on the motor. The superintendent failed to disengage the starter switch during the last LOTO and their thumb was smashed in the v-belt.

2017 · 1 incidente

21 de julio de 2017 VA · Metal/No metálico Operador de bulldozer, Operador universal, Operador de equipo pesado, Ingeniero operador HERRAMIENTAS MANUALES (SIN MOTOR)
Boxley Materials Company · Caída a la pasarela o superficie de trabajo

Miner was helping to change the attachment on the excavator from a hammer to a bucket. As the miner tried to loosen the nut with a wrench, EE propped foot on the attachment for leverage. When the nut broke loose, the miner fell to the ground, landing on EE's elbow. The miner suffered a dislocated elbow.

2016 · 1 incidente

8 de febrero de 2016 VA · Metal/No metálico Dinamitero, Disparador, Pegador de tiros, Trabajador de explosivos, Cuadrilla de pólvora MANEJO DE MATERIALES
Boxley Materials Company · Sobreesfuerzo al levantar objetos

Taping a blast hole, reached down to grab EE's tape measure, felt a pop in EE's back.

2003 · 1 incidente

19 de junio de 2003 VA · Metal/No metálico Cargador frontal, Operador de pala-traílla, Operador de traílla, Cargador (payloader), Operador de equipo de traílla TRANSPORTE MOTORIZADO
Boxley Materials Company · Golpeado contra un objeto en movimiento

THE YARD LOADER OPERATOR WAS LOADING A HAUL TRUCK IN STOCKPILE AREA. WHILE LOADING, A CONTRACTOR PULLED HIS TRUCK BEHIND LOADER. LOADER OPERATOR BACKED AWAY FROM HAUL TRUCK TO GO FOR ANOTHER B UCKET W/O SEEING THE CONTRACTOR. WHEN HE DID SEE THE CONTRACTOR IN HIS MIRROR, HE SLAMMED ON HIS BRAKES TO AVOID HITTING THE CONTRACT TRUCK. HE STRAINED & PULLED HIS BACK MUSCLE FROM THE STOP

2002 · 1 incidente

18 de junio de 2002 VA · Metal/No metálico Operador de pala de carbón/mineral, Paleador, Operador de pala mecánica RESBALÓN O CAÍDA DE PERSONA
Boxley Materials Company · Sobreesfuerzo, no clasificado en otra parte

EE WAS GETTING OFF OF LINKBELT ROCKBREAKER WHEN FOOT CAUGHT IN TRACK.

2000 · 1 incidente

1999 · 1 incidente

1998 · 2 incidentes

19 de mayo de 1998 VA · Metal/No metálico Encargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campo HERRAMIENTAS MANUALES (SIN MOTOR)
Vulcan Constr. Materials, L.P. · Golpeado por... no clasificado en otra parte

USING UTILITY KNIFE TO CUT BELTING, SLIPPED AND CUT KNEE AREA. 3 STITCHES.

15 de mayo de 1998 VA · Metal/No metálico Gerente de mina, Capataz de mina, Propietario de mina ELÉCTRICO
Vulcan Constr. Materials, L.P. · Contacto con corriente eléctrica

CHECKING ELECTRICAL STARTERS WITH MULTIMETER.

1997 · 1 incidente

1 de diciembre de 1997 VA · Metal/No metálico Encargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campo MANEJO DE MATERIALES
Vulcan Constr. Materials, L.P. · Golpeado por... no clasificado en otra parte

WHILE PERFORMING REPAIR TO ADJUST CONNECTING PIN FOR BUCKET ON KOMATSU 300, THE PIN WAS REMOVED AND ASSISTING EMPLOYEE. THE OTHER EMPLOYEE WAS AUNABLE TO HOLD HEAVY HINGE CONNECTION WHICH ROLL ED AND STRUCK\PINCHED THE INJURED EMPLOYEE'S RIGHT FOOT AND ANKLE CAUSING SEVERE ABRASIONS\CONTUSIONS REQUIRING ER VISIT FOR STITCHES.

For insurers, brokers, and safety consultants

The full compliance file on Martin Marietta - Rich Patch Quarry

A dated report covering the 26-year penalty trail, line-item violation pattern, contest and docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF with the underlying data as CSV.