Mining Incidents

MARTIN MARIETTA - RICH PATCH QUARRY: 46 MSHA citations Metal/Non-Metal

Low Moor, Alleghany County, VA  ·  Active
MSHA Mine ID: 4406897

MARTIN MARIETTA - RICH PATCH QUARRY has $7K in proposed MSHA penalties and $55 outstanding across 1 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at MARTIN MARIETTA - RICH PATCH QUARRY.

Fatalities
0
Total incidents
10
Years on record
1997–2018
Latest incident
Oct 2018
Compliance record
MSHA citations since 2000
46
citations
10
significant & substantial
$6,521
proposed penalties
$6,458
paid to date
99% of proposed penalties paid to date, a $63 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
68
inspections on record
1,234
inspection hours
3.7
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
46 citations across 1,234 inspection hours.
Source: MSHA inspections data, updated weekly.

MARTIN MARIETTA - RICH PATCH QUARRY has $7K in proposed MSHA penalties and $55 outstanding across 1 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$7K
proposed penalties
$7K
current assessed
$6K
paid to date
$55
outstanding
46 assessments are final orders; 1 contested dockets.
Of $108 in penalties contested before the Commission, $100 was upheld in final decisions.
As of the most recent assessment on 2023-06-22.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
21.7%
significant & substantial
13.0%
high negligence or reckless
21.7%
reasonably likely or greater
69.6%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 37.0% low, 50.0% moderate, 13.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
1 citations taken to the federal commission · 2% of citations on record
  • Settled 1 · 100%
100%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 1 decided S&S contests · industry: 79%
7%
Penalty reduction in decided contests
$108 proposed, $100 after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2010-03-22.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
VA 2010-287M Settlement Koutras 2010 $108 → $100
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2026-07-28
0%
of limit-tested samples over the exposure limit
31
samples
7
limit-tested
Most sampled contaminants
  • Respirable dust, <.1mg23
  • Quartz, respirable, >1% Qtz6
  • Nuisance dust, respirable, <1% Qtz2
Show the individual readings (31)
Date Contaminant Concentration Limit Conc / limit Occupation
2026-07-28 Respirable dust, <.1mg 0 Front-end Loader Operator
2026-07-28 Respirable dust, <.1mg 0 Front-end Loader Operator
2026-07-28 Respirable dust, <.1mg 0 Crusher Oper/Worker
2025-07-16 Respirable dust, <.1mg 0 Front-end Loader Operator
2025-07-16 Respirable dust, <.1mg 0 Front-end Loader Operator
2025-07-16 Quartz, respirable, >1% Qtz 0.19 Utility Man
2025-07-16 Respirable dust, <.1mg 0 Crusher Oper/Worker
2023-08-22 Respirable dust, <.1mg 0 Crusher Oper/Worker
2023-08-22 Respirable dust, <.1mg 0 Front-end Loader Operator
2023-08-22 Nuisance dust, respirable, <1% Qtz 0.18 10 0.02 Utility Man
2022-05-23 Respirable dust, <.1mg 0 Front-end Loader Operator
2022-05-23 Respirable dust, <.1mg 0 Front-end Loader Operator
2022-05-23 Respirable dust, <.1mg 0 Crusher Oper/Worker
2022-05-23 Nuisance dust, respirable, <1% Qtz 0.19 10 0.02 Lab Technician
2019-05-29 Respirable dust, <.1mg 0 Front-end Loader Operator
2019-05-29 Respirable dust, <.1mg 0 Dry Screen Plant Operator
2019-05-29 Respirable dust, <.1mg 0 Front-end Loader Operator
2015-12-17 Respirable dust, <.1mg 0 Mechanic
2015-12-17 Respirable dust, <.1mg 0 Front-end Loader Operator
2015-12-17 Respirable dust, <.1mg 0 Mechanic
2010-06-30 Quartz, respirable, >1% Qtz 0.43 1.87 0.23 Front-end Loader Operator
2010-06-30 Quartz, respirable, >1% Qtz 0.64 2.07 0.31 Crusher Oper/Worker
2004-12-02 Respirable dust, <.1mg 0 Crusher Oper/Worker
2003-10-22 Respirable dust, <.1mg 0 Front-end Loader Operator
2003-10-22 Respirable dust, <.1mg 0 Scale Man
2003-10-22 Quartz, respirable, >1% Qtz 0.15 1.47 0.10 Front-end Loader Operator
2003-10-22 Quartz, respirable, >1% Qtz 0.26 1.49 0.17 Crusher Oper/Worker
2003-04-09 Respirable dust, <.1mg 0 Front-end Loader Operator
2003-04-09 Respirable dust, <.1mg 0 Front-end Loader Operator
2003-04-09 Respirable dust, <.1mg 0 Truck Driver
2003-04-09 Quartz, respirable, >1% Qtz 0.16 1.28 0.13 Crusher Oper/Worker
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

MARTIN MARIETTA - RICH PATCH QUARRY recorded 9.74 reportable injury cases per 100 full-time workers in 2000.

Injury rate, 2000
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
9.74
total case rate
0.00
days-away rate
0.000
fatality rate
Above average. The US metal and nonmetal mining average was 4.77 and the all-US-mining average was 5.64 cases per 100 workers.
In Virginia, metal and nonmetal mining averaged 3.65 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Vulcan Constr. Materials, L.P. 1997 to 2002
  2. Boxley Materials Company 2002 to 2026
  3. Martin Marietta Materials, Inc. 2026 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 6
2025 5
2024 6
2023 6
2022 5
2021 6
2020 6
2019 7
2018 7
2017 7
2016 6
2015 6
2014 6
2013 6
2012 6
2011 6
2010 7
2009 7
2008 9
2007 8
2006 6
2005 5
2004 5
2003 8
2002 8
2001 7
2000 9
Source: MSHA quarterly employment and production, updated weekly.

MARTIN MARIETTA - RICH PATCH QUARRY sits in Alleghany County, Virginia, where the Census mining category is 0.2% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Alleghany County, Virginia · Population 14,962
0.2%
Mining share of county employment
$55,160
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 2,332 0 0 0.0
2026 Q1 667 0 0 0.0
2025 Q4 2,698 0 0 0.0
2025 Q3 3,018 0 0 0.0
2025 Q2 3,351 0 0 0.0
2025 Q1 1,982 0 0 0.0
2024 Q4 3,015 0 0 0.0
2024 Q3 2,703 0 0 0.0
Show 98 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2024 Q2 2,722 0 0 0.0
2024 Q1 2,455 0 0 0.0
2023 Q4 2,985 0 0 0.0
2023 Q3 3,053 0 0 0.0
2023 Q2 3,016 1 0 331.6
2023 Q1 2,359 0 0 0.0
2022 Q4 2,487 0 0 0.0
2022 Q3 2,843 0 0 0.0
2022 Q2 3,071 1 0 325.6
2022 Q1 2,127 0 0 0.0
2021 Q4 3,285 0 0 0.0
2021 Q3 3,160 0 0 0.0
2021 Q2 3,005 0 0 0.0
2021 Q1 3,209 0 0 0.0
2020 Q4 3,522 0 0 0.0
2020 Q3 3,587 0 0 0.0
2020 Q2 3,513 0 0 0.0
2020 Q1 1,966 0 0 0.0
2019 Q4 2,821 1 0 354.5
2019 Q3 3,147 0 0 0.0
2019 Q2 3,167 0 0 0.0
2019 Q1 3,689 1 1 271.1
2018 Q4 4,019 0 0 0.0
2018 Q3 4,456 0 0 0.0
2018 Q2 4,057 0 0 0.0
2018 Q1 3,826 0 0 0.0
2017 Q4 3,588 0 0 0.0
2017 Q3 3,954 0 0 0.0
2017 Q2 4,016 0 0 0.0
2017 Q1 3,911 3 0 767.1
2016 Q4 2,937 0 0 0.0
2016 Q3 3,639 1 0 274.8
2016 Q2 3,738 0 0 0.0
2016 Q1 3,184 0 0 0.0
2015 Q4 3,201 1 0 312.4
2015 Q3 3,156 1 0 316.9
2015 Q2 3,129 0 0 0.0
2015 Q1 2,535 0 0 0.0
2014 Q4 2,992 0 0 0.0
2014 Q3 3,660 1 0 273.2
2014 Q2 1,158 0 0 0.0
2014 Q1 3,179 2 0 629.1
2013 Q4 2,697 0 0 0.0
2013 Q3 3,054 2 2 654.9
2013 Q2 3,257 0 0 0.0
2013 Q1 3,338 0 0 0.0
2012 Q4 2,421 0 0 0.0
2012 Q3 3,012 0 0 0.0
2012 Q2 3,189 1 0 313.6
2012 Q1 2,818 0 0 0.0
2011 Q4 2,891 1 0 345.9
2011 Q3 3,139 2 0 637.1
2011 Q2 3,061 0 0 0.0
2011 Q1 1,622 0 0 0.0
2010 Q4 3,129 1 0 319.6
2010 Q3 3,407 0 0 0.0
2010 Q2 2,883 0 0 0.0
2010 Q1 2,181 1 1 458.5
2009 Q4 2,148 0 0 0.0
2009 Q3 2,723 0 0 0.0
2009 Q2 2,999 0 0 0.0
2009 Q1 3,032 0 0 0.0
2008 Q4 3,476 0 0 0.0
2008 Q3 3,895 0 0 0.0
2008 Q2 4,052 0 0 0.0
2008 Q1 3,766 1 0 265.5
2007 Q4 3,478 0 0 0.0
2007 Q3 3,820 0 0 0.0
2007 Q2 4,291 0 0 0.0
2007 Q1 3,484 1 0 287.0
2006 Q4 4,083 0 0 0.0
2006 Q3 3,109 1 0 321.6
2006 Q2 3,427 0 0 0.0
2006 Q1 4,273 1 0 234.0
2005 Q4 2,696 0 0 0.0
2005 Q3 3,582 0 0 0.0
2005 Q2 3,710 0 0 0.0
2005 Q1 2,600 0 0 0.0
2004 Q4 3,608 0 0 0.0
2004 Q3 2,530 0 0 0.0
2004 Q2 2,656 0 0 0.0
2004 Q1 1,981 0 0 0.0
2003 Q4 3,271 1 0 305.7
2003 Q3 3,019 0 0 0.0
2003 Q2 3,847 1 0 259.9
2003 Q1 1,875 0 0 0.0
2002 Q4 3,224 0 0 0.0
2002 Q3 3,520 2 1 568.2
2002 Q2 2,062 0 0 0.0
2002 Q1 4,636 0 0 0.0
2001 Q4 2,908 4 0 1375.5
2001 Q3 3,459 1 0 289.1
2001 Q2 5,218 0 0 0.0
2001 Q1 1,606 2 2 1245.3
2000 Q4 4,442 0 0 0.0
2000 Q3 6,050 2 1 330.6
2000 Q2 6,149 2 1 325.3
2000 Q1 3,886 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

10 on file

2018 · 1 incident

October 10, 2018 VA · Metal/Non-Metal superintendent MACHINERY
Boxley Materials Company · Caught in, under or between running or meshing objects

Superintendent locked out and tagged out the crusher run belt to remove a blockage of material which had stopped the belt. The belt was cut on and off more than once during the process and the v-belts were replaced on the motor. The superintendent failed to disengage the starter switch during the last LOTO and their thumb was smashed in the v-belt.

2017 · 1 incident

July 21, 2017 VA · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDTOOLS (NONPOWERED)
Boxley Materials Company · Fall to the walkway or working surface

Miner was helping to change the attachment on the excavator from a hammer to a bucket. As the miner tried to loosen the nut with a wrench, EE propped foot on the attachment for leverage. When the nut broke loose, the miner fell to the ground, landing on EE's elbow. The miner suffered a dislocated elbow.

2016 · 1 incident

February 8, 2016 VA · Metal/Non-Metal blaster, shooter, shotfirer, explosive worker, powder gang/monkey HANDLING OF MATERIALS
Boxley Materials Company · Over-exertion in lifting objects

Taping a blast hole, reached down to grab EE's tape measure, felt a pop in EE's back.

2003 · 1 incident

June 19, 2003 VA · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator POWERED HAULAGE
Boxley Materials Company · Struck against a moving object

THE YARD LOADER OPERATOR WAS LOADING A HAUL TRUCK IN STOCKPILE AREA. WHILE LOADING, A CONTRACTOR PULLED HIS TRUCK BEHIND LOADER. LOADER OPERATOR BACKED AWAY FROM HAUL TRUCK TO GO FOR ANOTHER B UCKET W/O SEEING THE CONTRACTOR. WHEN HE DID SEE THE CONTRACTOR IN HIS MIRROR, HE SLAMMED ON HIS BRAKES TO AVOID HITTING THE CONTRACT TRUCK. HE STRAINED & PULLED HIS BACK MUSCLE FROM THE STOP

2002 · 1 incident

June 18, 2002 VA · Metal/Non-Metal coal/ore shovel operator, shoveler, power shoveler SLIP OR FALL OF PERSON
Boxley Materials Company · Over-exertion (Not Elsewhere Classified)

EE WAS GETTING OFF OF LINKBELT ROCKBREAKER WHEN FOOT CAUGHT IN TRACK.

2000 · 1 incident

1999 · 1 incident

1998 · 2 incidents

May 19, 1998 VA · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDTOOLS (NONPOWERED)
Vulcan Constr. Materials, L.P. · Struck by... (Not Elsewhere Classified)

USING UTILITY KNIFE TO CUT BELTING, SLIPPED AND CUT KNEE AREA. 3 STITCHES.

1997 · 1 incident

December 1, 1997 VA · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Vulcan Constr. Materials, L.P. · Struck by... (Not Elsewhere Classified)

WHILE PERFORMING REPAIR TO ADJUST CONNECTING PIN FOR BUCKET ON KOMATSU 300, THE PIN WAS REMOVED AND ASSISTING EMPLOYEE. THE OTHER EMPLOYEE WAS AUNABLE TO HOLD HEAVY HINGE CONNECTION WHICH ROLL ED AND STRUCK\PINCHED THE INJURED EMPLOYEE'S RIGHT FOOT AND ANKLE CAUSING SEVERE ABRASIONS\CONTUSIONS REQUIRING ER VISIT FOR STITCHES.