Mining Incidents

METRO PORTABLE #5 Metal/Non-Metal

Controlada por Knife River Corporation
Brightwood, Clackamas Condado, OR  ·  Abandoned
ID de mina MSHA: 3502382

METRO PORTABLE #5 tiene $57K en multas propuestas de MSHA y $0 pendientes en 8 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.

Seguir esta mina

Avísenme cuando se presente un nuevo incidente de la MSHA en METRO PORTABLE #5.

Muertes
0
Incidentes totales
12
Años en registro
1987–2021
Último incidente
Mar 2021
Historial de cumplimiento
Citaciones de MSHA desde 2000
157
citaciones
40
significativas y sustanciales
$57,187
multas propuestas
$55,839
pagado a la fecha
98% de las multas propuestas pagadas a la fecha, una diferencia de $1,348.
Fuente: datos de violaciones de MSHA, actualizados semanalmente.
Actividad de inspección
Inspecciones de MSHA desde 2000
68
inspecciones registradas
992
horas de inspección
n/d
citaciones por 100 horas de inspección
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.
Tasa retenida: 992 horas de inspección son muy pocas para una tasa estable. Se requiere un mínimo de 1,000 horas de inspección.
Fuente: datos de inspecciones de MSHA, actualizados semanalmente.

METRO PORTABLE #5 tiene $57K en multas propuestas de MSHA y $0 pendientes en 8 expedientes impugnados.

Disposicion de multas
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.
$57K
multas propuestas
$56K
evaluacion actual
$56K
pagado a la fecha
$0
pendiente
157 evaluaciones son ordenes finales; 8 expedientes impugnados.
Al ultimo periodo de evaluacion el 2022-08-23.
Fuente: datos de infracciones evaluadas y de conferencia/litigio de MSHA, actualizados semanalmente.
Tasas de seguridad trimestrales
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.
Citaciones por millón de horas trabajadas, según lo reportado a MSHA
Trimestre Horas trabajadas Citaciones S&S Por 1M hrs
2024 Q3 0 0 0
2024 Q2 0 0 0
2024 Q1 0 0 0
2023 Q4 0 0 0
2023 Q3 0 0 0
2023 Q2 0 0 0
2023 Q1 726 0 0 0.0
2022 Q4 3,553 0 0 0.0
Mostrar 91 trimestres anteriores
Trimestre Horas trabajadas Citaciones S&S Por 1M hrs
2022 Q3 5,120 2 1 390.6
2022 Q2 4,566 0 0 0.0
2022 Q1 3,290 1 0 304.0
2021 Q4 4,776 0 0 0.0
2021 Q3 5,986 1 0 167.1
2021 Q2 4,652 14 3 3009.5
2021 Q1 4,005 5 0 1248.4
2020 Q4 4,304 0 0 0.0
2020 Q3 5,729 7 2 1221.9
2020 Q2 5,221 0 0 0.0
2020 Q1 4,045 3 1 741.7
2019 Q4 6,698 0 0 0.0
2019 Q3 5,456 4 0 733.1
2019 Q2 4,678 1 0 213.8
2019 Q1 3,627 3 0 827.1
2018 Q4 5,000 0 0 0.0
2018 Q3 6,005 1 0 166.5
2018 Q2 5,120 0 0 0.0
2018 Q1 4,446 4 1 899.7
2017 Q4 4,565 0 0 0.0
2017 Q3 4,870 0 0 0.0
2017 Q2 5,119 1 0 195.4
2017 Q1 3,601 2 0 555.4
2016 Q4 4,096 0 0 0.0
2016 Q3 5,807 7 2 1205.4
2016 Q2 4,833 0 0 0.0
2016 Q1 3,457 0 0 0.0
2015 Q4 3,085 9 5 2917.3
2015 Q3 4,069 0 0 0.0
2015 Q2 3,443 4 3 1161.8
2015 Q1 2,621 0 0 0.0
2014 Q4 3,186 3 1 941.6
2014 Q3 2,929 0 0 0.0
2014 Q2 3,273 0 0 0.0
2014 Q1 2,990 0 0 0.0
2013 Q4 2,918 0 0 0.0
2013 Q3 2,872 0 0 0.0
2013 Q2 2,749 0 0 0.0
2013 Q1 1,983 1 1 504.3
2012 Q4 3,438 0 0 0.0
2012 Q3 3,995 0 0 0.0
2012 Q2 3,567 0 0 0.0
2012 Q1 2,787 1 0 358.8
2011 Q4 3,022 0 0 0.0
2011 Q3 3,224 4 1 1240.7
2011 Q2 3,265 0 0 0.0
2011 Q1 2,743 4 2 1458.3
2010 Q4 2,795 0 0 0.0
2010 Q3 3,043 0 0 0.0
2010 Q2 2,183 4 2 1832.3
2010 Q1 2,043 0 0 0.0
2009 Q4 2,944 9 6 3057.1
2009 Q3 3,815 0 0 0.0
2009 Q2 2,864 0 0 0.0
2009 Q1 2,529 5 4 1977.1
2008 Q4 3,827 1 0 261.3
2008 Q3 4,693 0 0 0.0
2008 Q2 4,919 4 2 813.2
2008 Q1 3,855 7 1 1815.8
2007 Q4 4,227 0 0 0.0
2007 Q3 4,782 0 0 0.0
2007 Q2 4,608 0 0 0.0
2007 Q1 4,350 12 0 2758.6
2006 Q4 5,077 0 0 0.0
2006 Q3 5,675 2 0 352.4
2006 Q2 5,169 0 0 0.0
2006 Q1 3,783 0 0 0.0
2005 Q4 3,462 3 1 866.6
2005 Q3 3,793 0 0 0.0
2005 Q2 3,075 5 1 1626.0
2005 Q1 2,379 0 0 0.0
2004 Q4 3,943 2 0 507.2
2004 Q3 3,688 0 0 0.0
2004 Q2 3,514 2 0 569.2
2004 Q1 3,248 1 0 307.9
2003 Q4 3,063 0 0 0.0
2003 Q3 3,644 0 0 0.0
2003 Q2 3,384 0 0 0.0
2003 Q1 2,190 1 0 456.6
2002 Q4 3,870 4 0 1033.6
2002 Q3 4,687 0 0 0.0
2002 Q2 3,787 2 0 528.1
2002 Q1 2,273 0 0 0.0
2001 Q4 3,751 2 0 533.2
2001 Q3 3,968 0 0 0.0
2001 Q2 3,330 6 0 1801.8
2001 Q1 2,048 0 0 0.0
2000 Q4 3,712 0 0 0.0
2000 Q3 3,489 3 0 859.8
2000 Q2 2,812 0 0 0.0
2000 Q1 2,734 0 0 0.0
No se registran muertes en esta mina.

Incidentes reportables

12 en archivo

2021 · 1 incidente

26 de marzo de 2021 OR · Metal/No metálico Obrero, Herrero, Cuadrilla, Mensajero de repuestos, Peón, Recolector, Operario de mina HERRAMIENTAS MANUALES (SIN MOTOR)
Jim Turin & Sons Inc · Sobreesfuerzo, no clasificado en otra parte

Using a bar to clean a chute, when employee felt chest pop and thought nothing of it. Moved onto next chute when employee felt chest and back pop and felt pain

2015 · 1 incidente

24 de julio de 2015 OR · Metal/No metálico Cargador frontal, Operador de pala-traílla, Operador de traílla, Cargador (payloader), Operador de equipo de traílla MANEJO DE MATERIALES
Jim Turin & Sons Inc · Atrapado en, bajo o entre un objeto en movimiento y uno fijo

Injured employee and two other workers were replacing wear iron in Canica Impact Crusher when the hydraulically raised cover which was supplemented by support from a hydraulic jack which failed and knocked out the safety bar causing the lid to drop approximately 9" and rotate pinning injured employee's thigh against hand railing.

2014 · 1 incidente

20 de junio de 2014 OR · Metal/No metálico Minero, Prospector, no clasificado en otra parte HERRAMIENTAS MANUALES (SIN MOTOR)
Jim Turin & Sons Inc · Sobreesfuerzo al jalar o empujar objetos

On 6/27/14 the EE indicated that the injury occurred on 6/20/2014. He explained that they had been lying on their backs tightening an adjustment nut for the belt with a wrench. It was an awkward position as they had to pull on the wrench at the same time to get the nit to tighten properly. He felt a little pain in his groin but he said it did not hurt that bad.

2011 · 1 incidente

24 de marzo de 2011 OR · Metal/No metálico Encargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campo MANEJO DE MATERIALES
Jim Turin & Sons Inc · Sobreesfuerzo al levantar objetos

EE was lifting a screen which weighed approx. 50-60 lbs. up into the back of a pickup truck. As he was lifting the screen he felt his elbow tear. After about three days he noticed a significant amount of bruising in and around his right elbow. EE went to see his doctor Monday March 28th, and they set up an MRI and a follow up appt. for Friday April 1.

2007 · 1 incidente

7 de marzo de 2007 OR · Metal/No metálico Obrero, Herrero, Cuadrilla, Mensajero de repuestos, Peón, Recolector, Operario de mina MANEJO DE MATERIALES
Jim Turin & Sons Inc · Sobreesfuerzo al levantar objetos

Employee reported some pain & discomfort in his left abdomen. We discussed it & we decided to rest his side after a weekend & see if the pain went away. The pain did subside. Then a couple of weeks later, he said the pain was back. He went to see the Dr. The Dr. put him on restricted.

2006 · 1 incidente

6 de junio de 2006 OR · Metal/No metálico Perforador, Operador de talud, Operador de perforadora de talud MANEJO DE MATERIALES
Jim Turin & Sons Inc · Sobreesfuerzo al levantar objetos

Employee lifted a bucket of dirt to carry to his drill. When he turned he felt pain in his stomach muscles. He reported to me that he had a surgery to fix a hernia on 2-9-07 so this was the first time I verified that injury required surgery.

2004 · 1 incidente

21 de enero de 2004 OR · Metal/No metálico Obrero, Herrero, Cuadrilla, Mensajero de repuestos, Peón, Recolector, Operario de mina MANEJO DE MATERIALES
Jim Turin & Sons Inc · Golpeado contra un objeto fijo

HE STOOD UP AND HIT HIS HEAD ON A CONVEYOR THAT WAS REMOVED OUT OF THE PLANT TO BE REPAIRED. THE IMPACT TO HIS SCALP CAUSED A CUT THAT REQUIRED THREE STITCHES.

2001 · 1 incidente

10 de julio de 2001 OR · Metal/No metálico Perforador de roca PISAR O ARRODILLARSE SOBRE UN OBJETO
Jim Turin & Sons Inc · Sobreesfuerzo, no clasificado en otra parte

EE WAS MOVING AIR TRACK DRILL AND STEPPEDN ON A ROCK WHICH CAUSED HIS KNEE TO TWIST. IT APPEARS HE TORE SOME CARTILEGE LOOSE IN HIS KNEE.

1999 · 1 incidente

2 de noviembre de 1999 OR · Metal/No metálico Cargador frontal, Operador de pala-traílla, Operador de traílla, Cargador (payloader), Operador de equipo de traílla RESBALÓN O CAÍDA DE PERSONA
Jim Turin & Sons Inc · Sobreesfuerzo, no clasificado en otra parte

PARKING EQUIPMENT AND STEPPED DOWN AND TURNED WRONG, ALSO DOING MAINTENANCE WORK AND TWISTED ON ROCK.

1996 · 1 incidente

9 de agosto de 1996 OR · Metal/No metálico Perforador de roca MAQUINARIA
Jim Turin & Sons Inc · Golpeado por objeto proyectado

EE WAS RUNNING AN AIR TRACK DRILL. HE WAS BRING HIS STEEL UP OUT OF THE ROCK, AS HE WAS BRINGIN HIS SECOND STEEL OUT, THE STEEL HUNG UP A LITTLE AND THE HAMMER RATTLE AGAINST THE COLLAR. A SMA LL PIECE OF STEEL FLEW OFF THE COLLAR AND PENETRATED EE'S LEFT SHOULDER. THE DR. ATTEMPTED TO REMOVE IT.

1995 · 1 incidente

20 de abril de 1995 OR · Metal/No metálico Obrero, Herrero, Cuadrilla, Mensajero de repuestos, Peón, Recolector, Operario de mina TRANSPORTE MOTORIZADO
Jim Turin & Sons Inc · Golpeado por... no clasificado en otra parte

HE WAS DISCONNECTING A CHAIN FROM A PIECE OF STEEL. THE CHAIN WAS HANGING DOWN FROM LOADER BUCKET, AS THE LOADER BACKED AWAY THE CHAIN HOOKED THE PIECE OF STEEL AND DRUG IT ACROSS HIS SHIN. HE WAS TAKEN TO A LOCAL DOCTOR AND STITCHED UP. THE CUT WAS APPROX. 1 1/2" LONG ON THE FRONT OF HIS SHIN 20 STITCHES.

1987 · 1 incidente

13 de agosto de 1987 OR · Metal/No metálico Capataz de planta de preparación, Supervisor, Supervisor de planta de molienda, Supervisor de horno MAQUINARIA
Portland East Corp · Golpeado por... no clasificado en otra parte

LATE NIGHT DARK3STUPIDITY OF EMPLOYEE NEGLIGENCE ON HIS PART MAN USED HIS HAND TO CLEAN OUT SHOOT RATHER THAN A STICK OR SHOVEL

For insurers, brokers, and safety consultants

The full compliance file on METRO PORTABLE #5

A dated report covering the 26-year penalty trail, line-item violation pattern, contest and docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF with the underlying data as CSV.