MONCURE QUARRY: 80 citaciones de la MSHA Metal/Non-Metal

Employee was working in a 5-man team to screw bowl of crusher in place. While exerting force with EE's arms EE's right shoulder was strained.

EE was using a battery powered drill when the drill bit got caught on the steel causing the drill to quickly spin around. This caused the bottom side of the drill to flip and impact EE at the top of their safety glasses, resulting in a laceration above their right eye.

An employee sustained a small fracture and laceration to the tip of EE's right pinky finger. EE was lifting a return roller onto the top of a conveyor belt to stage it until needed. EE pinched the finger between the roller and the belt.

While working on a de-watering pump the employee grabbed the v-belt of the pump and pulled on it to see if the pump was free of the obstruction they were clearing. The belt rotated and pinched the employee's left pinky between the belt and the pulley.

The employee stepped on a metal bracket to climb on to a conveyor frame EE was disassembling. The weld holding the bracket on failed causing the employee to fall approximately 3.5 feet. While falling EE attempted to grab the conveyor frame and lacerated left palm. The laceration required stitches.

Employee was using a utility knife to cut a zip-tie from a cable. When the zip-tie was cut the momentum of the knife caused it to strike EE's opposite arm causing a laceration to EE's forearm.

The employee used the back edge of pocket knife blade to remove the cap from a bottle of chalk for a chalk line. When the cap released, the front of the blade cut right thumb. The laceration required 3 stitches.

The injured employee was working as part of a team installing an I-beam on a construction project. While attempting to move the beam in place with a pry bar, the beam shifted downward and out striking the employees left thumb. It resulted in a fracture and laceration.

While the employee was moving a 55 gallon drum of oil, the contents shifted and caused the drum to stand up unexpectedly and slammed against an adjacent barrel. The employees left pinky finger was pinched between the lids of the two barrels. The finger flesh was removed from the nail to the tip.

An employee was standing on a belt conveyor that was locked and tagged out. Another employee removed the tag and lock and started the belt. The employee jumped from the belt and onto the catwalk. EE landed on hands and knees and sprained right wrist. Employee's first doctors visit was on 7/26/2016.

Roller bracket and roller fell on employee's left forearm while removing roller for maintenance creating a contusion and strain of his left forearm.

Employee held a bolt head while trying to loosen the bolt with an impact wrench. Torque on the wrench cut through the glove and his left hand, requiring stitches to the wound.

Employee was biten by a spider when he placed his hand on the conveyor railing during a walkaround inspection.

While working in the area of a crusher, the employee was struck on the left shoulder by a rock that fell from the screen above the crusher.

While the employee was tightening the locking nut on a crusher, a sliver of metal splintered off of the pin hammer that was being struck with a sledge hammer by the employee. The sliver lodged in the employee's left upper arm.

Employee was striking a pin on an excavator adaptor with a hammer when he re-injured his wrist. The injured wrist has been reported as an original injury dated 5/15/02. The employee has received 2 weeks of restricted duty as of 3/28/05, the date of the first evaluation for injury.

EMPLOYEE STRAINED HIS WRIST WHILE TRYING TO TWIST A SCREEN OFF THE END OF A HOSE ATTACHED TO A WATER PUMP. THOUGH THE INJURY OCCURRED ON 5/15/02, DETERMINATION OF THE NEED FOR RESTRICTED DUTY WAS NOT MADE UNTIL 6/26/02.

EE WAS CUTTING 12INCH SECTON OF RUBBER HOSE WITHA UTILITY KNIFE. AS HE FINISHED CUTTING THE SLITIN THE HOSE, THE UTILITY KNIFE SLIPPED OFF OF THE HOSE CUTTING HIS RIGHT THIGH. 4 STITCHES WERE REQUIRED FOR MED TREATMENT

EE STATED THAT HE WAS USING A HAND SHOVEL TO STEM A BLAST HOLE. WHEN HE TWISTED HIS BACK AND THUS PINCHED A NERVE IN HIS LOWER BACK.

THE EMPLOYEE STATED THAT HE TRIPPED OVER A PIECE OF REBAR. AS HE FELL HIS RIGHT HAND BETWEEN THUMB AND PALM WAS CUT BY A ROCK.

THE EE STATED THAT THE PNEUMATIC HAMMER SLIPPED DOWN WHILE HE HAD HIS FOOT ON THE GENTRALIZEN ARM TO HELP HOLD THE DRILL STEEL AS HE WAS BREAKING IT LOOSE. THIS RESULTED IN A FRACTURE TO THE B IG TOE ON THE LEFT FOOT.

WATER TRUCK OPERATOR LOST HIS BALANCE WHILE WETTING THE MUCK PILE HE FELL TO THE GROUND & CUT HIS HAND ON A ROCK REQUIRED 4 STITCHES

LOADING PC OF STEEL ON TRUCK MASHED FINGER BETWEEN TRUCK BED AND STEEL

EMPLOYEE WAS CUTTING A CARDBOARD BOX WITH A POCKET KNIFE WHEN THE KNIFE SLIPPED CUTTING THE LEFT HAND

EE WAS LOADING BAGS OF ANFO FROM STORAGE MAGAZINE ONTO THE FLATBED TRUCK. WHEN EE TURNED AROUND TO PICK UP A BAG HE FELT A SUDDEN PAIN IN HIS BACK.

EMPLOYEE WAS LIFTING A JAW CRUSHER TOGGLE PLATE INTO A LOADER BUCKET.WHEN THE EMPLOYEE COULD NOT HOLS IT ANY LONGER HE DROPPED IT ON HIS FINGER.

EMPLOYEE WAS USING A HAND HAMMER TO LOOSEN A DRILL STEEL COUPLING. WHILE HOLDING THE COUPLING HE STRUCK HIS FINGER WITH THE HAMMER.

EMPLOYEE WAS USING A PIPE WRENCH TO TIGHTEN A PIPE COUPLING WHEN HE PULLED A MUSCLE IN HIS BACK.

EMPLOYEE WAS PULLING A WEDGE OUT OF THE JAW CURESHER AND STRAINED HIS BACK

EMPLOYEE WAS LIFTING A PIECE OF DRILL STEEL TO REPOSITION IT ON PIECE OF STEEL THE EMPLOYEE STRAINED A MUSCLE IN HIS BACK.