POCONO QUARRY PLANT Metal/Non-Metal

Opened inspection door to check adjustment, turned rotor when I felt something pop in right shoulder

Employee was carrying a chain to the primary feeder to wrap around a rock. The employee tripped and fell on same level. EE caught the fall using right wrist causing EE's wrist to fracture.

Employee was removing a guard when EE received a laceration on right hand from a sharp edge.

Employee was lifting a pip-men out of the primary crusher when the worn/greased shaft slide out of its position, falling onto the crane's operator station.

Employee was pulling/hanging an electrical cable when he came in contact with the two copper wires. There was a piece of the outer jacket that was worn out which the employee did not notice.

Employee twirled his hand on the engine pull start

Employee was repairing a screen barring when the wrench slipped causing the employee's finger to get jammed between the wrench and barring.

EE WHILE CLEARING A PILE OF STONE HIT SOLID ROCKWHILE USING A PICK AXE.

EE WAS CLEANING/REPAIRING THE INSIDE OF A LARGE BIN WHEN A LARGE AMOUNT OF DEBRIS FELL ON HIM. EE WAS PULLED FROM BIN DISORIENTED - (EE STATES HE LOST CONSCIOUSNESS FOR A MINUTE). EE DECLINED MEDICAL TREATMENT UNTIL 8/25/03.

EMPLOYEE WAS REACHING FOR AN IMPACT GUN WHEN A ROCK FELL FROM AN UNKNOWN LOCATION AND STRUCK A PRY BAR THAT WAS THROWN INTO EE'S LEFT BICEPT.

EE WAS DESCENDING THE STAIRS OF THE 84 CRUSHER BUILDING WHEN HE SLIPPED - TWISTING HIS ANKLE.

WALKING DOWN EMBANKMENT TRIP, LOST FOOTING FELL STRIKING HEAD ON ROCK AND LEFT ARM ALSO FACE LOST TWO TEETH 34 STITCHES.

CLEANING OUT FEEDER, WAS JAMMED UP, ROCK FELL DOWN FROM INSIDE & LANDED ON LEFT FOOT.

LIFTING CUTTING EDGE TO BOTTOM OF LOADER BUCKET, SPRAINED BACK TIGHTENING BOLTS UP.

WAS WELDING CLIMBING OVER GUARD RAIL SLIPPED ANDCAME DOWN ON RAIL AND CUT LEG.

CLEARING OUT CRUHSER, PRYING ON ROCK, PRY BAR SLIPPED, HE FELL FARWARD AND CUT HAND A ROCK.

CLEARING CRUSHER BLOCKAGE OUT. ROCK FELL DOWN AND SMASHED END OF FINGER ON RIGHT INDEX FINGER.

EE STATES HE STEPPED INTO A BLASHOLE & SPRAINED HIS ANKLE.

PUTTING ON SKIRTING BELT, TWISTED BODY TO GET ON 2 PULLED BACK ON RIGHT SIDE.

EMPLOYEE WAS INJURED AS HE TRIED TO CLEAN OUT A CHUTE FROM REVERSING CONVEYOR TO NO. 3 CONVEYOR. EMPLOYEE'S LEFT FOOT WAS CAUGHT BETWEEN HEAD PULLEY OF REVERSING CONVEYOR AND ITS GEAR REDUCTIO N BOX.

FELL OUT OF 35 TON CAT TRUCK #E668, FELL ABOUT 8 FT. TO GROUND. CAT WALK WAS WET.

INSIDE 84 CRUSHER CLEANING OUT CLOG OF ROCKS, PULLED ROCK UP AND ANOTHER ROCK CAME DOWN AND HIT FINGER.

HWAS WELDING, CAUGHT SHIRT ON FIRE.

CLIMBING OFF MACHINE FOOT SLIPPED ON METAL STEP AND HE FELL OFF. AND HIT LEFT SHOULDER ON TRACK.

LEAPING OVER PILE OF STONE & PULLED MUSCLES IN RIGHT LEG

POTTING NEW ROLL IN BAR, SLIPPED, FELL OFF CATWALK.

COULDN'T HEAR IF MOTOR WAS RUNNING PUT HAND ON MOTOR TO SEE IF RUNNING, CAUGHT FINGER

EE WAS FUELING UP SHOVEL 614 WITH FUEL TRUCK 217 WHEN IT FILLED UP AND SPLASHED BACK IN HIS EYES.

WAS HELPING THE WELDER AND GOT WELDERS FLASH IN EYES.

GOT OUT OF TRUCK,SLIPPED ON MUD AND TWISTED RIGHT KNEE.

WAS GOING TO COME DOWN LADDER ON HAUL TRUCK AND LOST BALANCE ON LANDING AND FELL ON GROUND.

COMING DOWN LADDER ON LOADER, SLIPPED AND HIT KNEE ON LADDER STEP.

CAUGHT HAND ON STEEL POST AND CUT PALM OF RIGHT HAND.

61203RYING TO FREE UP A ROLLER & FINGER GOT CAUTGHT IN ROLLER

ROCK FELL AGAINST FINGER AND CUT IT.RIGHT LITTLE FINGER WAS CLEANING OUT 84 CRUSHER.

PUTTING NUT ON CRUSHER,SLIPPED OFF AND HIT HAND.

ROCK FLEW OFF SHAKER & HIT HIM ON HEAD HELMET.

SOMEONE GRINDING AND PIECE METAL FLEW IN EYE.

TURNING OVER CRANE START MOTOR AND IT KICKED BACK.

CHANGING SCREENING BEARING AND PIECE OF METAL FLEW IN EYE.

AIR WRENCH BLEW DIRT IN FACE, PIECE OF DIRT WENT IN RIGHT EYE.

REPAIRING TRAVEL CHAIN LINK WENT TO HIT LINK WITH SLEDGE HAMMER MISSED AND HIT FINGER.

CLEANING OUT CRUSHER, ROCK CAME DOWN AND HIT HAND.

CHISELING OFF BUSHING, PIECE FLEW OFF AND HIT ARM.

WHILE DRILLING A PIECE OF MEDAL FLEW BACK INTO CAP AND METAL PIECE LODGING IN LEFT EYE.

CHANGING BIT-BIT COLLAR FELL DOWN AND THE STEEL SMASHED HIS THUMB.

REMOVING WOOD FROM MIDDLE OF BROKEN MALLOT KNIFE SLIPPED AND CUT HAND.CUT LEFT PALM.

A 4"BOLT FELL ON EMPLOYES PINKY FINGER.

EMPLOYEE WAS CHANGING BACK HEAD ON DHD-360HAMMER.

EMPLOYEE WASWA LKING DOWN STEPS. IN DOING SO,EMPLOYEE SLIPPED AND FELL,LANDING ON HIS ABCK.

EMPL WAS WELDING AIR ARK

EMPL WAS STANDING WAITING FOR BLASTING TO GO OFF

EMPL WAS PUTTING NEW CABLE ON SHOVEL RETRACT CABLE CABLE SLIPPED OUT OF BUCKET AND STRUCK EMPL IN THE FACE

EMPL WAS TRYING TO OPEN JAMMED DOOR ON TRUCK #251

EMPL WAS PTTING STEEL IN LOADER BUCKET