Employee was changing the motor on feed conveyor, using grinder to cut off an old bolt when grinder shifted and made contact with left index finger
Portable Crusher Unit F: 134 citaciones de la MSHA Metal/Non-Metal
Portable Crusher Unit F tiene $57K en multas propuestas de MSHA y $0 pendientes en 0 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en Portable Crusher Unit F.
- Muertes
- 0
- Incidentes totales
- 25
- Años en registro
- 1989–2025
- Último incidente
- May 2025
ⓘ
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.ⓘ
Una orden bajo la Sección 107(a) retira a los mineros de un área cuando un inspector detecta un peligro inminente. Cada orden se levanta una vez corregida la condición, por lo que esto cuenta las órdenes emitidas, no las que están en vigor ahora.Portable Crusher Unit F tiene $57K en multas propuestas de MSHA y $0 pendientes en 0 expedientes impugnados.
ⓘ
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.ⓘ
Las proporciones se calculan sobre las citaciones que llevan la codificación de gravedad y negligencia de la MSHA; una pequeña parte de los registros no está codificada.ⓘ
Una muestra es una medición de cumplimiento en un momento dado, no un historial de exposición individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.Contaminantes en minas de metal y no metal (muestras personales)
ⓘ
Muchas muestras son mediciones de detección de sustancias sin límite de exposición aplicable; se cuentan como muestras pero se excluyen de toda cifra de exceso. Los porcentajes de exceso usan solo muestras con límite establecido.
Última medición: 2025-12-09
ⓘ
Muchas muestras son mediciones de detección de sustancias sin límite de exposición aplicable; se cuentan como muestras pero se excluyen de toda cifra de exceso. Los porcentajes de exceso usan solo muestras con límite establecido.- Quartz, respirable, >1% Qtz149 en exceso
- Respirable dust, <.1mg6
Ver los análisis individuales (20)
| Fecha | Contaminante | Concentración | Límite | Conc / límite | Ocupación |
|---|---|---|---|---|---|
| 2025-06-27 | Quartz, respirable, >1% Qtz | 0.44 | 0.26 | 1.69 | Crusher Oper/Worker |
| 2025-06-27 | Quartz, respirable, >1% Qtz | 0.79 | 0.53 | 1.49 | Laborer, Bullgang |
| 2024-11-12 | Quartz, respirable, >1% Qtz | 1.8 | 0.46 | 3.91 | Laborer, Bullgang |
| 2024-08-20 | Quartz, respirable, >1% Qtz | 1.39 | 0.36 | 3.86 | Laborer, Bullgang |
| 2019-09-10 | Quartz, respirable, >1% Qtz | 0.27 | 0.27 | 1.00 | Laborer, Bullgang |
| 2012-06-18 | Quartz, respirable, >1% Qtz | 2.35 | 0.37 | 6.35 | Laborer, Bullgang |
| 2005-04-20 | Quartz, respirable, >1% Qtz | 1.34 | 0.84 | 1.60 | Cleanup Man |
| 2004-10-26 | Quartz, respirable, >1% Qtz | 0.52 | 0.28 | 1.86 | Crusher Oper/Worker |
| 2004-10-26 | Quartz, respirable, >1% Qtz | 0.59 | 0.23 | 2.57 | Laborer, Bullgang |
| 2025-12-09 | Respirable dust, <.1mg | 0 | Crusher Oper/Worker | ||
| 2025-12-09 | Respirable dust, <.1mg | 0 | Laborer, Bullgang | ||
| 2025-06-27 | Quartz, respirable, >1% Qtz | 0.12 | 0.59 | 0.20 | Front-end Loader Operator |
| 2025-06-27 | Quartz, respirable, >1% Qtz | 0.14 | 0.51 | 0.27 | Front-end Loader Operator |
| 2024-11-12 | Quartz, respirable, >1% Qtz | 0.21 | 1.25 | 0.17 | Front-end Loader Operator |
| 2024-11-12 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2024-08-20 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2024-08-20 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2019-09-10 | Quartz, respirable, >1% Qtz | 0.2 | 0.35 | 0.57 | Crusher Oper/Worker |
| 2019-09-10 | Respirable dust, <.1mg | 0 | Truck Driver | ||
| 2005-04-20 | Quartz, respirable, >1% Qtz | 0.29 | 0.42 | 0.69 | Crusher Oper/Worker |
Portable Crusher Unit F registró 8.88 casos de lesión reportables por cada 100 trabajadores a tiempo completo en 2025.
ⓘ
Esta tasa son los casos de lesión reportables por cada 100 trabajadores a tiempo completo por año, calculada como 200,000 por los casos dividido entre las horas-empleado reportadas por el operador a la MSHA. Los casos son lesiones que la MSHA clasificó en grado 01 a 07; se excluyen los eventos de solo accidente que no lesionaron a nadie, y también las lesiones de contratistas, cuyas horas no corresponden a una sola mina. Las tasas comienzan en el año 2000, cuando inicia el reporte trimestral de empleo, y se omiten por debajo de 20,000 horas en un año.| Año | tasa de casos totales | días perdidos | mortales |
|---|---|---|---|
| 2025 * | 8.88 | 0.00 | 0.000 |
| 2024 * | 0.00 | 0.00 | 0.000 |
| 2016 * | 0.00 | 0.00 | 0.000 |
- Le Grand Johnson Construction Company 1989 a 2015
- LeGrand Johnson 2015 al presente
| Año | Empleados |
|---|---|
| 2026 | 10 |
| 2025 | 8 |
| 2024 | 9 |
| 2023 | 6 |
| 2022 | 2 |
| 2021 | 6 |
| 2020 | 5 |
| 2019 | 5 |
| 2018 | 4 |
| 2017 | 7 |
| 2016 | 9 |
| 2015 | 5 |
| 2014 | 6 |
| 2013 | 4 |
| 2012 | 6 |
| 2011 | 5 |
| 2010 | 7 |
| 2009 | 7 |
| 2008 | 5 |
| 2007 | 7 |
| 2006 | 7 |
| 2005 | 8 |
| 2004 | 7 |
| 2003 | 7 |
| 2002 | 7 |
| 2001 | 7 |
| 2000 | 7 |
Portable Crusher Unit F se ubica en Sweetwater County, Wyoming, donde la categoría minera del Censo representa el 13.3% del empleo del condado.
ⓘ
Las cifras del condado provienen de la Encuesta sobre la Comunidad Estadounidense de la Oficina del Censo de EE. UU., estimaciones quinquenales agrupadas, por lo que la edición de 2023 abarca de 2019 a 2023. La categoría del Censo es 'minería, explotación de canteras y extracción de petróleo y gas', que es más amplia que la jurisdicción de la MSHA e incluye a trabajadores de petróleo y gas que ninguna mina emplea. Estas cifras describen el condado circundante, no esta mina, y no son un factor en ningún incidente específico.ⓘ
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2026 Q2 | 6,630 | 0 | 0 | 0.0 |
| 2026 Q1 | 1,947 | 0 | 0 | 0.0 |
| 2025 Q4 | 6,164 | 2 | 1 | 324.5 |
| 2025 Q3 | 6,367 | 2 | 0 | 314.1 |
| 2025 Q2 | 7,312 | 3 | 1 | 410.3 |
| 2025 Q1 | 2,689 | 0 | 0 | 0.0 |
| 2024 Q4 | 4,999 | 2 | 0 | 400.1 |
| 2024 Q3 | 8,251 | 7 | 1 | 848.4 |
Mostrar 94 trimestres anteriores Ocultar trimestres anteriores
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2024 Q2 | 5,994 | 0 | 0 | 0.0 |
| 2024 Q1 | 1,906 | 0 | 0 | 0.0 |
| 2023 Q4 | 3,358 | 0 | 0 | 0.0 |
| 2023 Q3 | 5,901 | 2 | 1 | 338.9 |
| 2023 Q2 | 4,935 | 0 | 0 | 0.0 |
| 2022 Q2 | 0 | 0 | 0 | |
| 2022 Q1 | 1,446 | 0 | 0 | 0.0 |
| 2021 Q4 | 2,614 | 0 | 0 | 0.0 |
| 2021 Q3 | 5,870 | 2 | 0 | 340.7 |
| 2021 Q2 | 2,173 | 1 | 0 | 460.2 |
| 2021 Q1 | 569 | 0 | 0 | 0.0 |
| 2020 Q4 | 3,301 | 0 | 0 | 0.0 |
| 2020 Q3 | 4,644 | 12 | 7 | 2584.0 |
| 2020 Q2 | 3,799 | 0 | 0 | 0.0 |
| 2020 Q1 | 1,250 | 0 | 0 | 0.0 |
| 2019 Q4 | 4,107 | 0 | 0 | 0.0 |
| 2019 Q3 | 4,392 | 11 | 6 | 2504.6 |
| 2019 Q2 | 2,272 | 0 | 0 | 0.0 |
| 2019 Q1 | 2,515 | 1 | 0 | 397.6 |
| 2018 Q4 | 2,481 | 0 | 0 | 0.0 |
| 2018 Q3 | 821 | 1 | 0 | 1218.0 |
| 2018 Q2 | 1,580 | 0 | 0 | 0.0 |
| 2018 Q1 | 2,389 | 0 | 0 | 0.0 |
| 2017 Q4 | 940 | 0 | 0 | 0.0 |
| 2017 Q3 | 4,239 | 3 | 0 | 707.7 |
| 2017 Q2 | 3,173 | 0 | 0 | 0.0 |
| 2017 Q1 | 8,710 | 3 | 1 | 344.4 |
| 2016 Q4 | 6,046 | 3 | 2 | 496.2 |
| 2016 Q3 | 4,923 | 0 | 0 | 0.0 |
| 2016 Q2 | 5,534 | 0 | 0 | 0.0 |
| 2016 Q1 | 5,379 | 1 | 0 | 185.9 |
| 2015 Q4 | 4,883 | 0 | 0 | 0.0 |
| 2015 Q3 | 770 | 2 | 0 | 2597.4 |
| 2015 Q2 | 1,960 | 0 | 0 | 0.0 |
| 2015 Q1 | 0 | 0 | 0 | |
| 2014 Q4 | 810 | 0 | 0 | 0.0 |
| 2014 Q3 | 2,750 | 1 | 0 | 363.6 |
| 2014 Q2 | 7,007 | 0 | 0 | 0.0 |
| 2014 Q1 | 1,925 | 0 | 0 | 0.0 |
| 2013 Q4 | 1,120 | 0 | 0 | 0.0 |
| 2013 Q3 | 7,056 | 6 | 1 | 850.3 |
| 2013 Q2 | 0 | 0 | 0 | |
| 2013 Q1 | 0 | 0 | 0 | |
| 2012 Q4 | 800 | 0 | 0 | 0.0 |
| 2012 Q3 | 2,100 | 1 | 1 | 476.2 |
| 2012 Q2 | 1,925 | 3 | 0 | 1558.4 |
| 2012 Q1 | 1,890 | 0 | 0 | 0.0 |
| 2011 Q4 | 3,150 | 0 | 0 | 0.0 |
| 2011 Q3 | 3,150 | 0 | 0 | 0.0 |
| 2011 Q2 | 1,750 | 10 | 5 | 5714.3 |
| 2011 Q1 | 0 | 0 | 0 | |
| 2010 Q4 | 12 | 0 | 0 | 0.0 |
| 2010 Q3 | 4,707 | 0 | 0 | 0.0 |
| 2010 Q2 | 1,470 | 0 | 0 | 0.0 |
| 2010 Q1 | 2,800 | 0 | 0 | 0.0 |
| 2009 Q4 | 1,120 | 0 | 0 | 0.0 |
| 2009 Q3 | 2,450 | 0 | 0 | 0.0 |
| 2009 Q2 | 4,235 | 11 | 1 | 2597.4 |
| 2009 Q1 | 1,400 | 0 | 0 | 0.0 |
| 2008 Q4 | 0 | 0 | 0 | |
| 2008 Q3 | 3,500 | 0 | 0 | 0.0 |
| 2008 Q2 | 3,465 | 0 | 0 | 0.0 |
| 2008 Q1 | 1,078 | 1 | 0 | 927.6 |
| 2007 Q4 | 3,696 | 0 | 0 | 0.0 |
| 2007 Q3 | 3,465 | 0 | 0 | 0.0 |
| 2007 Q2 | 2,695 | 0 | 0 | 0.0 |
| 2007 Q1 | 7,392 | 0 | 0 | 0.0 |
| 2006 Q4 | 490 | 0 | 0 | 0.0 |
| 2006 Q3 | 4,550 | 3 | 0 | 659.3 |
| 2006 Q2 | 3,150 | 0 | 0 | 0.0 |
| 2006 Q1 | 4,235 | 6 | 0 | 1416.8 |
| 2005 Q4 | 1,575 | 0 | 0 | 0.0 |
| 2005 Q3 | 1,890 | 0 | 0 | 0.0 |
| 2005 Q2 | 6,160 | 3 | 1 | 487.0 |
| 2005 Q1 | 3,960 | 0 | 0 | 0.0 |
| 2004 Q4 | 4,312 | 10 | 2 | 2319.1 |
| 2004 Q3 | 2,205 | 0 | 0 | 0.0 |
| 2004 Q2 | 2,268 | 0 | 0 | 0.0 |
| 2004 Q1 | 1,512 | 0 | 0 | 0.0 |
| 2003 Q4 | 3,080 | 0 | 0 | 0.0 |
| 2003 Q3 | 4,095 | 0 | 0 | 0.0 |
| 2003 Q2 | 3,080 | 0 | 0 | 0.0 |
| 2003 Q1 | 5,376 | 10 | 4 | 1860.1 |
| 2002 Q4 | 2,100 | 0 | 0 | 0.0 |
| 2002 Q3 | 2,835 | 0 | 0 | 0.0 |
| 2002 Q2 | 2,835 | 3 | 1 | 1058.2 |
| 2002 Q1 | 1,960 | 0 | 0 | 0.0 |
| 2001 Q4 | 1,575 | 5 | 2 | 3174.6 |
| 2001 Q2 | 4,410 | 0 | 0 | 0.0 |
| 2001 Q1 | 2,520 | 0 | 0 | 0.0 |
| 2000 Q4 | 2,520 | 0 | 0 | 0.0 |
| 2000 Q3 | 2,800 | 3 | 0 | 1071.4 |
| 2000 Q2 | 3,360 | 0 | 0 | 0.0 |
| 2000 Q1 | 3,360 | 0 | 0 | 0.0 |
Incidentes reportables
25 en archivo2025 · 1 incidente
2021 · 1 incidente
EE was removing a bearing from a tail pully, and while striking the bearing race with a hammer, a tiny piece of fragmented steel came off, striking the EE just above the safety glasses in the eye brow. The fragmented piece embedded in the bone and had to be removed.
2020 · 1 incidente
EE was tasked to clean out a screen box adjacent to the #2 screen, that got overloaded with materials. As they finished, they climbed down the ladder after cleaning off screen component and felt light discomfort in the right knee.
2010 · 1 incidente
He was installing a new screen. He was pulling and twisting and hurt his lower back.
2009 · 1 incidente
Removing sampler bracket from product conveyor and strained lower back.
2006 · 3 incidentes
Shoveling OT Belt. It was windy and dusty. Eyes got full of dust and sand. Eye kept hurting through the next day.
Heavy lifting. Tearing out crusher plant, pinched nerve, strain. Sharp pain shooting down leg.
Carpal tunnel in left wrist, ongoing for quite some time. Caused by steering loader - using joy stick with left hand.
2005 · 1 incidente
Rock chipped and piece of something went into left eye. Went to doctor and he drilled out imbedded peice of metal.
2004 · 3 incidentes
Loading Metal chutes into the Bobcat when he smashed and cut his ring finger on the right hand
climbing into loader, hand slipped off hand rail, right foot wedged between step and bumper of loader
CUTTING BELT, SLIPPED & CUT UPPER LEFT THIGH.
2003 · 2 incidentes
EE WAS SETTING UP CRUSHER & PUTTING IN PROTECTIVE RAILING WHEN IT SHIFTED, HE THEN FELL BREAKING HIS HEEL.
EE WAS ON CONVEYOR BELT TRYING TO LOOSEN A TURNBUCKLE, WHEN IT GAVE WAY HE LOST HIS BALANCE & FELL. HE LANDED ON HIS ANKLE & FRACTURED HIS LEFT HEEL.
1996 · 1 incidente
EE WAS REMOVING A ROCK THAT WAS STUCK IN THE SCREEN ON THE CRUSHER. HE HIT THE ROCK WITH A HAMMER. A PIECE OF THE ROCK BROKE OFF AND HIT EE ON THE UPPER LIP CUTTING IT. THE CUT REQUIRED SUTURE S.
1995 · 3 incidentes
EE WAS MOVING A PLATE AND STRAP. A SMALL PIECE OF METAL WENT INTO LEFT EYE.
YEMPLOYEE WAS CHANGING BEARING ON THE ROLLER SHAFT. HIT RACE WITH HAMMER TO SEE IF IT MOVED OR NEEDED TO BE CUT OFF. A PIECE OF BEARING HIT LEFT EYE, CUTTING IT.
EMPLOYEE WAS BACKING TRUCK UNDER TRAILER. WHEN THE TRUCK HIT 5TH WHEEL PIN ON THE TRIALER, EMPLOYEE HIT HIS LEFT CHEEK ON THE DOOR CUTTING IT. LACERATION REQUIRED SUTURES.
1994 · 1 incidente
EMPLOYEE WAS RELINING CONE, HIS FOURHT AND FIFTH FINGERS ON THE LEFT HAND WERE CRUSHED BETWEEN SHAFT AND CONE FRAMING, INJURING THEM. (STITCHES)
1992 · 4 incidentes
EMPLOYEE WAS HELPING REMOVE CONE MANTLE NUT. HE WAS PULLING WRENCH WITH COME-ALONG. HIS RIGHT HAND WAS HIT WITH A SLEDGE HAMMER AT THE KNUCKES ON THE RING FINGER AND LITTLE FINGER.
EMPLOYEE WAS FUELING 988 LOADER. HE STEPPED DOWN FROM LOADER- MUST HAVE TURNED HIS FOOT- HEARD A POP SOUND. AS TIME WENT ON, THE PAIN INCREASED. EMPLOYEE THEN WENT TO DOCTOR.
EMPL REPLACING BEARING,REINSTALLING IN GEAR BOX.GEAR BOX SLIPPED & SMASHED LITTLE FINGER LEFT HAND. FINGER WAS CUT REQUIRING 4 STITCHES AND THE BONE WAS CRACKED FROM LAST JOINT TO END OF FINGE R
EMPLOYEE WAS TAKING SAMPLES AND HIT HIS HEAD ON THE CONVEYOR FRAME. HIS HARD HAT HIT THE BRIDGE OF HIS NOSE, CAUSING A CUT THAT REQUIRED STITCHES.
1991 · 1 incidente
HANGING WIRE V BELT PULLED HAND IN CUTTING OF F TIP OF MIDDLE FINGER
1989 · 1 incidente
EMPLOYEE WAS UNPLUGING JAW ON TEH CRUSHER. A ROCK SLID SIDEWAYS AND HIT HIS FOOT. THE LEFT FOOT WAS CRUSHED AND BRUISED.