Buscar en el registro

EE WAS ASSISTING ANOTHER EE INSTALL A TROUGHING ROLLER. WHILE DOING SO EE PINCHED HIS SECOND FINGER ON HIS RIGHT HAND BETWEEN TWO ROLLERS. AT THAT TIME EE LOST CONCIOUSNESS FOR APPROX 30 TO 45 SECONDS. EE SUSTAINED A BRUISE TO BACK OF HIS HEAD AND WAS TRANSPORTED TO HOSPITAL. EE WAS RELEASED AFTER BRIEF OBSERVATION ADN RETURNED TO WORK THE NEXT DAY AS SCHEDULED.

EMPLOYEE WAS TAKING INVENTORY. HE USED HIS FOOT TO PUSH A HEAVY DRAWER BACK INTO PLACE. AT THAT TIME HE EXPERIENCED PAIN IN HIS STOMACH AREA. HEREMAINED AT WORK BUT HAS EXPERIENCED DISCOMFORT SINCE THEN. UPON HIS VISIT TO THE DOCTOR IT WAS DISCOVERED THAT HE HAD A DOUBLE HERNIA & IS DUE TO HAVE SURGERY ON 10/6 & IS EXPECTED TO BE OUT OF WORK FOR 6 WEEKS.

EMPLOYEE WAS HELPING TO REPLACE A SECTION OF PIPE ON THE DISCHARGE LINE OF DREDGE. AS HE WAS REMOVING A FLANGE HE CAUGHT HIS FINGER BETWEEN THE PIPE AND FLANGE.

INJURED EMPLOYEE WAS REPORTING TO WORK IN THE MORNING. HE WAS PUSHING THE WORK BOAT, USED TO ACCESS THE DREDGE, AWAY FROM THE SHORE AND STRAINED HIS BACK.

WHILE CLOSING BACK GATE OF DUMP TRUCK, HANDLE SLIPPED AND STRUCK HIM BETWEEN NOSE AND MOUTH, AND CHIPPED TOOTH.

HURT BACK WHILE PULLING PRE ASSEMBLED BICYCLE OUT OF THE BOX

EE AND CONTRACTOR WERE INSTALLING BOLTS INTO MAIN FRAME OF CONE CRUSHER BOLTS WERE 3"X60". APPROX. 100 LBS AS THE BOLT WAS PLACED INTO FRAME HOLE, THE INJURED EE TRIED TO ALIGN THE BOLT. THE C ONTRACTOR LOST HIS GRIP, AND THE BOLT DROPPED INTO HOLE CATCHING EE'S HANDS.

EE WAS HELPING TO CARRY A SECTION OF 1/2' SCREEN CLOTH ONTO SCREENING TOWER. HE FELT DISCOMFORT IN HIS BACK LATER DURING THE SHIFT.

WHILE HELPING TWO OTHER EE S MOVE LARGE FAN BY KILN, FAN FELL ON EE LEFT FOREARM CONTO HANDRAIL.

EMPLOYEE WAS CLOSING CAB DOOR ON MOTOR GRADER WHEN THE DOOR GLASS BROKE AND LACERATED HIS WRIST.

EE WAS WORKING ON THE HAMMER MILL ON TOWER 6. WHILE IN THE PROCESS OF TURNING THE HAMMERS HE FELT A STRIN IN HIS LOWER BACK. EE CONTINUES TO WORK MODIFIED WORK DUTIES.

EE WAS HELPING COWORKER PLACE GEASE DRUM ONTO BACK OF FUEL TRUCK. HIS HAND WAS CAUGHT BETWEEN THE GREASE DRUM AND TRUCK BED. HE WAS NOT WEARING WORK GLOVES.

EMPLOYEE WAS MAKING A LACING ON A SAND PLANT CONVEYER. WHILE GETTING ON THE BELT HE CUT HIS LEFT KNEE ON THE STOP CORD HOLDER. HE FALLED TO SEE THE FLATBAR ON THE FRAME THAT HOLDS THE STOPCORD

EE WAS PUSHING A PULLEY INSIDE THE BUCKET OF A BACKHOE WHEN HE FELT PAIN IN HIS LOWER BACK.

EE WAS PLACING DRILL AUGERS INTO PICKUP TRUCK BED. THEY WERE MUDDY AND AS HE WAS LOWERING AN AUGER INTO THE TRUCK BED, HE LOST HIS GRIP AND CAUGHT HIS FINGER BETWEEN TWO AUGERS. HE WAS WEARING WORK GLOVES. EE WAS DOING EXPLORATION DRILLING.

THE K-231 DIVERTER VALVE GOT JAMMED WITH A CHAIN FROM THE KILN, EE PUT HIS L HAND INSIDE THE VALVE AT THE SAME TIME THE ELECTRICIAN RE-SET THE MOTOR. EE WAS WITH HIS SUPERVISOR AT THE TIME & P ROPER LOCKOUT PROCEDURES WERE BEING FOLLOWED. WHEN THE SUPERVISOR (VIA RADIO) GAVE THE ELECTRICIAN THE OK TO START (RESET) MOTOR, EE PUT HAND IN VALVE.

EMPLOYEE WAS HELPING CO-WORKER REMOVE ROCK SCREENS FROM DECK AREA SO THEY COULD RETREIVE A WATERHOSE LAYING UNDERNEATH THE SCREENS. AS THE CO-WORKER LET GO OF THE SCREENS TO PICK UP THE HOSE, THE INJURED EMPLOYEE LOST HIS BALANCE AND THE SCREENS FELL ONTO HIM.

EE DURING HIS ANNUAL PHYSICAL WAS TOLD BY HIS DR THAT HE HAD SMALL HERNIA. HE DOES NOT RECALL HOW HE GOT IT WHEN HE GOT IT AND GAVE NO SPECIFIC INSTANCE AS TO HOW IT MIGHT HAVE HAPPENED

EE WAS TAKING A MATERIAL SAMPLE FROM CONVEYOR BELT USING A SMALL BUCKET. THE BUCKET FILLED WITH MATERIAL AND OVERTURNED ONTO HIS HAND. HIS HAND WAS CAUGHT BETWEEN THE BUCKET AND A BRACE THAT S UPPORTED THE SCREEN THAT WAS POSITIONED OVER THECONVEYOR BELT.

EE WAS CHECKING FOR AN OIL LEAK ON HIS LOADER. HE STRUCK THE MIRROR, KNOCKING OFF HIS HARD HAT AND CUTTING HIS FOREHEAD.

EMPLOYEE WAS HELPING TO REPAIR CONVEYOR BELT ANDFELT DISCOMFORT IN HIS HIP AND LEG AS HE WAS CLIMBING DOWN FROM WORK AREA.

EE WAS CLIMBING FROM A LOADED BARGE ONTO AN EMPTY BARGE. AS HE PLACED HIS LEG ONTO THE EMPTY BARGE HE STRUCK HIS LEG AGAINST A JAGGED PIECE OF METAL ON THE WAISTRAIL.

EE WAS REMOVING FASTENERS TO REPLACE SCREEN DECKS AND STRUCK HIS HAND AGAINST THE SIDE OF VIBRATING SCREEN. HE WAS NOT WEARING WORK GLOVES.

EE WAS HELPING TO REPAIR CONVEYOR BELT AND FELT DISCOMFORT IN HIS HIP AND LEG AS HE WAS CLIMBING DOWN FROM WORK AREA.

EE AND COWORKER WERE REMOVING LARGE ROCKS FROM THE TRUCK DUMP AREA OF GYRATORY CRUSHER. AS THEY WERE ROLLING INTO GYRATORY FEED BOX, EE'S FINGERWAS CAUGHT BETWEEN 2 ROCKS. EE WAS WEARING WORK GLOVES.

WHILE REPLACING DUMP CABLE ON DRALGINE BUCKET--EEWAS LINING NEW CABLE ONTO SHIEVE WHEN RIGHT HAND (FINGER) GOT CAUGHT BETWEN SHIEVE & CABLE. THIS ACCIDENT WAS CAUSED BY POOR COMMUNICATION BETW EEN COWORKERS.

EE WAS REMOVING ROCKS FROM A CONE CRUSHER AND STRUCK HIS ARM ON THE CRUSHER BODY.

EE AND COWORKERS WERE INSTALLING A LINER INTO VIBRATING SCREEN DECK. THE EE INJURED HIS BACK WHILE TRYING TO POSITION THE LINER. HE WAS WEARING A LUMBAR SUPPORT BELT.

EE CLEANING MUD & DIRT FROM UNDER CONVEYOR. WHILE LFITING FULL SHOVEL, PAIN FLEW INTO LOWER BACK CAUSING NUMBNESS.

EE CLIMBED THE LADDER OF HIS LOADER AND BENT OVER TO OPEN THE DOOR AND PULLED A MUSCLE IN HIS BACK..

EE WAS REMOVING A COMEALONG FROM AN OVERHEAD LOCATION AND IT FELL STRIKING HIS EAR

EE WAS MOVING A WATER HOSE WHEN HE FELT PAIN IN HIS BACK

WHILE LIFTING A TOOL BOX FROM BED OF A UTILITY PICKUP TRUCK, EMPLOYEE FELT A SHARP PAIN IN LOWER BACK. EMPLOYEE SAW A DR. INITIAL TREATMENT INCLUDED X-RAYS, EXAM ETC.EMPLLYEE CONTINUED TO WORK UNTIL THE TREATING DR. PUT IN THE HOSPITAL (IN TRACTION) ON 12-1-96.

EMP WAS LIFTING A SCREEN AND WHILE LIFTING IT, THE SCREEN ROLLED BACK DOWN CAUSING A WIRE TO CUTTHE EMP'S OUTSIDE UPPER ARM. THE CUT WAS APPROX.1 1/2" LONG AND REQUIRED A BUTTERFLY STITCH AND TETANUS SHOT.

EMPLOYEE SPRAYED THE SEAT IN HIS LOADER WIHT SILICONE LUBRICANT TO KEEP IT FROM SQUEAKING. THE FUMES FROM THE SPRAY CAUSED IRRITATION IN RIGHT EYE.

EMPLOYEE WAS ASSIGNED TASK OF SORTING PALLETS IWTH SECOND EMPLOYEE. EMPLOYEE CONDUCTED TASK ALONE AND SUFFRED AN ABDOMINAL HERNIA FROM LIFTH A-24# PALLET.

EMPLOYEE WAS TRYING TO OPEN BIN DOOR. THE HANDLE TO THE MANUAL DOOR HAD JAMMED AGAINST THE SIDE OF BIN. AS THE DOOR OPENED, THE HANDLE CAUGHT HIS HAND AGAINST THE BIN.

WHILE REMOVING BOLTS FROM FRONT IDLER, YOKE MASHED LEFT INDEX FINGER.

NEW EE WAS BEING TRAINED TO DRIVE A HAUL TRUCK, A ROCK WAS IN THE ROAD. THE DRIVER AND TRAINEE GOT OUT OF THE TRUCK TO PICK UP THE ROCK. WHEN HE BENT OVER, SOMETHING PULLED IN HIS BACK. HE WAS IN A GREAT DEAL OF PAIN AND AN AMBULANCE WAS CALLED TO TAKE HIM TO THE HOSPITAL.

EMPLOYEE WAS REMOVING A LARGE ROCK FROM THE 4 1/4' CRUSHER WHEN ANOTHER ROCK FELL FROM SYNTRON STRIKING HIS HAND.

EE WAS CLEARING ROCK JAM FROM DISCHARGE BOX AT 2 SYNTRON. A ROCK FELL CATCHING FINGER AGAINST BOOK.

LIFTING ROLLERS, PULLED MUSCLE IN RIGHT SHOULDER.

HE WAS PULLING PUNCH PLATES ONTO THE SHAKER SCREEN & STRAINED HIS BACK.

EMPLOYEE WAS WASHING SPILLAGE FROM UNDER BELT CONVEYOR USING HIGH PRESSURE WATER HOSE. HE COULDN'T CONTROL THE HOSE AND IT STRUCK HIM IN THE MOUTH.

EMPLOYEE WAS HELPING TO REPAIR SAND SCREEN ON THE SECOND LEVEL OF PLANT. THE OXY-ACETYLENE HOSE WAS DRAPED OVER HANDRAIL AND ATTACHED TO TANKS LOCATED ON FIRST LEVEL. AS HE WAS PREPARING TO RE ACH FOR THE TORCH, THE WEIGHT OF THE HOSE PULLED THE TORCH OVER THE HANDRAIL AND IT "FLIPPED UP" AND STRUCK HIM IN THE MOUTH.

WHILE CONNECTING MOTOR HIT ELBOW ON FRAME,

EE WAS CLIMBING ONTO A CLAMSHELL BUCKET TO ATTACH THE HOLDING LINE CABLE. AS HE PLACED HIS LEFT FOOT ONTO THE BUCKET AND "PUSHED OFF" WITH RIGHT LEG, HE FELT HIS LEFT KNEE "POP."

FELT PAIN IN LOWER STOMACH AREA WHILE MOVING GREASE DRUMS IN SHOP.

EMPLOYEE WAS REPAIRING WATER FILER BOX ON ALLIS CHALMERS 500 CRUSHER. THE DOOR WAS WARPED AND HE USED ANOTHER PIECE OF METAL (SPACER RING FOR SHORTHEAD CRUSHER) INSTEAD OF THE PROPER TOOL. T HE METAL SLIPPED AND HE STRUCK HIS HAND ON DOOR.

EE WAS PULLING ON HANDLE TO OPEN DOOR ON VIBRATING SCREEN SO A HOLE COULD BE REPAIRED ON SCREEN DECK. HE CAUGHT HIS RIGHT RING FINGER BETWEEN HANDLE AND BACK STOP.