Buscar en el registro

EE WAS ASSISTING ANOTHER EE INSTALL A TROUGHING ROLLER. WHILE DOING SO EE PINCHED HIS SECOND FINGER ON HIS RIGHT HAND BETWEEN TWO ROLLERS. AT THAT TIME EE LOST CONCIOUSNESS FOR APPROX 30 TO 45 SECONDS. EE SUSTAINED A BRUISE TO BACK OF HIS HEAD AND WAS TRANSPORTED TO HOSPITAL. EE WAS RELEASED AFTER BRIEF OBSERVATION ADN RETURNED TO WORK THE NEXT DAY AS SCHEDULED.

EMPLOYEE WAS TAKING INVENTORY. HE USED HIS FOOT TO PUSH A HEAVY DRAWER BACK INTO PLACE. AT THAT TIME HE EXPERIENCED PAIN IN HIS STOMACH AREA. HEREMAINED AT WORK BUT HAS EXPERIENCED DISCOMFORT SINCE THEN. UPON HIS VISIT TO THE DOCTOR IT WAS DISCOVERED THAT HE HAD A DOUBLE HERNIA & IS DUE TO HAVE SURGERY ON 10/6 & IS EXPECTED TO BE OUT OF WORK FOR 6 WEEKS.

EMPLOYEE AND COWORKER WERE EMPTYING METAL BINS IN SHOP. COWORKER WAS USING A PRYBAR TO UNWEDGE BIN HANDLE WHEN IT SLIPPED AND STRUCK INJURED EMPLOYEE IN THE ARM.

EMPLOYEE WAS HELPING TO REPLACE A SECTION OF PIPE ON THE DISCHARGE LINE OF DREDGE. AS HE WAS REMOVING A FLANGE HE CAUGHT HIS FINGER BETWEEN THE PIPE AND FLANGE.

EE WAS HELPING TO REMOVE CONCAVES FROM GYRATORY CRUSHER WHEN HIS LEG BECAME PINNED BETWEEN THE MAIN FROME AND CONCAVE. HE LOST HIS BALANCE AND TWISTED HIS ANKLE.

EE WAS COMING DOWN FROM C-1 TO Y-62 ON LADDE3R WHEN HE SLIPPED & FELL HITTING HIS LEFT ARM

INJURED EMPLOYEE WAS REPORTING TO WORK IN THE MORNING. HE WAS PUSHING THE WORK BOAT, USED TO ACCESS THE DREDGE, AWAY FROM THE SHORE AND STRAINED HIS BACK.

WHILE CLOSING BACK GATE OF DUMP TRUCK, HANDLE SLIPPED AND STRUCK HIM BETWEEN NOSE AND MOUTH, AND CHIPPED TOOTH.

INJURES EMPLOYEE WAS USING UTILITY KNIFE TO INSTALL POLY-DECK SECTIONS ON VIBRATING SCREEN AND CUT THE TOP OF LEFT HAND. HE WAS NOT WEARING GLOVES.

EE WAS CLEANING MATERIAL SPILLAGE FROM THE NO. T20 BELT CONVEYOR AND TWISTED HIS ANKLE WHEN HE STEPPED OFF OF THE DECKING ONTO A ROCK.

HURT BACK WHILE PULLING PRE ASSEMBLED BICYCLE OUT OF THE BOX

EE REPORTED A HEARING LOSS IN BOTH EARS TO THE TARMAC CORPORATE RISK MANAGER. OUR WORKERS COMPENSATION CARRIER DETERMINED THE CLAIM WAS VALID.

WAS WORKING UNDER HAUL TRUCK AND HIT HIS HEAD ON TRUCK FRAME.

LIFTING MILL BALS BARREL WITH CRANE WHEN CABLESNAPPED OUT OF BARREL CUTTING HAND.

INJURED EE WAS DISMOUNTING FROM A TRACK DOZER AND STEPPED ON A ROCK OR FROZEN GROUND AND AGGRAVATED A PREVIOUSLY BRUISED HEEL.

EE AND CONTRACTOR WERE INSTALLING BOLTS INTO MAIN FRAME OF CONE CRUSHER BOLTS WERE 3"X60". APPROX. 100 LBS AS THE BOLT WAS PLACED INTO FRAME HOLE, THE INJURED EE TRIED TO ALIGN THE BOLT. THE C ONTRACTOR LOST HIS GRIP, AND THE BOLT DROPPED INTO HOLE CATCHING EE'S HANDS.

EE WAS HELPING TO CARRY A SECTION OF 1/2' SCREEN CLOTH ONTO SCREENING TOWER. HE FELT DISCOMFORT IN HIS BACK LATER DURING THE SHIFT.

WHILE HELPING TWO OTHER EE S MOVE LARGE FAN BY KILN, FAN FELL ON EE LEFT FOREARM CONTO HANDRAIL.

WHILE CLIMBING LADDER TO GET ON LOADER, THE FRAME OF THE LOADER SUPPORT WAS LOOSE CAUSING HIM TOSLIP, TWISTING HIS RIGHT ANKKLE.

EE WAS MOUNTING WATER TRUCK AND HIS FOOT SLIPPED ON A STEP AND HE STRUCK AND BRUISED HIS KNEE.

EMPLOYEE WAS CLOSING CAB DOOR ON MOTOR GRADER WHEN THE DOOR GLASS BROKE AND LACERATED HIS WRIST.

EMPLOYEE WAS OPERATING HAUL TRUCK AND BEING LOADED WITH ROCK WHEN THE LOADER BUCKET SHOOK DUMP BODY CAUSING TRUCK CAB TO VIBRATE.

EE WAS WORKING ON THE HAMMER MILL ON TOWER 6. WHILE IN THE PROCESS OF TURNING THE HAMMERS HE FELT A STRIN IN HIS LOWER BACK. EE CONTINUES TO WORK MODIFIED WORK DUTIES.

EMPLOYEE WAS TIGHTENING WEDGE BOLTS ON CONE CRUSHER #1 WHEN THE WEDGE FLEW UP STRIKING EMPLOYEE IN THE NOSE.

EE TRIPPED OVER GRATING NEAR SLAG DRIER. FIRST SEEN BY DR ON 7/6/99. RELEASED FOR FULL DUTY WORK. EE PUT ON LIGHT DUTY WORK BY TREATING DR ON 7/13/99. X-RAYS REVEALED NO FRACTURE-BRUISED RIBS.

EE WAS DRIVING WATER TRUCK DOWN INCLINED HAUL ROAD TO DELIVER SUPPLY OF WATER TO ROCK DRILL IN PIT. THE BRAKES DID NOT SLOW THE VEHICLE SUFFICIENTLY TO MAKE A LEFT TURN. EE CONTINUED DRIVING V EHICLE ON HAUL ROAD AND DROVE THROUGH BERM FALLIING APPROX 40' TO QUARRY FLOOR. EE WAS WEARING SEAT BELT.

EE WAS EXITING FLATBED WHEN HIS BACK SUPPORT GOT CAUGHT ON THE OXYGEN/ACET. SUPPORT CAUSING HIM TO LOSE HIS BALANCE TWISTING HIS KNEE. EE WAY DR ON 6/7/99 AND RETURNED TO WORK. ON 7/11/99 EE R E-VISITED DR AND PUT ON MODIFIED WORK STATUS. AN MRI IS TO BE PERFORMED NEXT WEEK TO RULE OUT LIG. TEAR.

EE WAS HELPING COWORKER PLACE GEASE DRUM ONTO BACK OF FUEL TRUCK. HIS HAND WAS CAUGHT BETWEEN THE GREASE DRUM AND TRUCK BED. HE WAS NOT WEARING WORK GLOVES.

EMPLOYEE WAS MAKING A LACING ON A SAND PLANT CONVEYER. WHILE GETTING ON THE BELT HE CUT HIS LEFT KNEE ON THE STOP CORD HOLDER. HE FALLED TO SEE THE FLATBAR ON THE FRAME THAT HOLDS THE STOPCORD

EMPLOYEE WAS CUTTING OUT RETAINER RING INSIDE KILN WITH TORCH WHILE STANDING ON TOP OF RUNNINGBOARD OF KILN SHELL. (APPROX 3-4 FT HIGH) THE BOARD SLIPPED CAUSING EMPLOYEE TO FALL ON RIGHT SHOULDER.

EE WAS PUSHING A PULLEY INSIDE THE BUCKET OF A BACKHOE WHEN HE FELT PAIN IN HIS LOWER BACK.

EE WAS AT THE NO18 BELT CONVEYRO (SHUTTLE BELT)TO DETERMINE THE CAUSE OF THE CONVEYOR BELT RUBBING ON THE FRAME. EE TRAVELED BEYOND THE PROTECTIVE RAILING TO JOG THE BELT HE INADVERTENTLYPLACE D HIS FOOT ON THE SHUTTLE TRACK & THE SHUTTLE TRAVELED OVER HIS FOOT. EE WAS WEARING SAFETY STEEL TOE BOOTS

EE & COWORKERS WERE CHANGING THE BEARINGS ON A BLT CONVEYOR HEAD PULLEY. AS EE REMOVED THE FINALFEW BOLTS THE PULLY DROPPED DOWN & CAUGHT HIS FINGER BETWEEN THE PULLEY & THE BEARING HOUSING. T HE COMALONG WAS NOT PROPERLY POSITIONED TO SUPPORT THE WEIGHT OF THE PULLEY WHEN THE FINAL BOLTSWERE REMOVED

EE WAS LIFTING A RAILMENT TOOL WHEN HE FELT A PAIN IN HIS GROIN AREA. THE EE WAS WORKING WITH OTHER AND THEY WERE LIFTING TOGETHER A 120 .B RERAILER TO PUT A RAILCAR BACK ON R.R. TRACKS.

EE ATTEMPTED TO CROSS ON OVERFLOW DITCH IN SAND PLANT (BY JUMPING ACROSS) WHILE RETURNING TO HISREPAIR TRUCK. NOTE-INJ WAS INITALLY DIAGNOSED ASSPRAIN TO L. KEE DID NOT BECOME REPORTABLE UNTI 2/18/99

EE WAS PLACING DRILL AUGERS INTO PICKUP TRUCK BED. THEY WERE MUDDY AND AS HE WAS LOWERING AN AUGER INTO THE TRUCK BED, HE LOST HIS GRIP AND CAUGHT HIS FINGER BETWEEN TWO AUGERS. HE WAS WEARING WORK GLOVES. EE WAS DOING EXPLORATION DRILLING.

DUE TO ICY CONDITIONS, DRILLER SLIPPED & FELL CAUSING 3 CRACKED VERTEBRAE, BRUISED LEFT ELBOW AND MINOR LACERATION ON BACK OF KNEE.

WHILE HELPING GUIDE A SIDE BARREL INTO BALL SEPARTOR EE CUT HAND ON SIDE OF BARREL WHEN FORKLIFT WAS MOVING BARRELL

WHILE CUTTING A LARGE BOX OF METAL A SECTION OF IT CAME LOOSE CUTTING HIS LEFT KNEE

THE K-231 DIVERTER VALVE GOT JAMMED WITH A CHAIN FROM THE KILN, EE PUT HIS L HAND INSIDE THE VALVE AT THE SAME TIME THE ELECTRICIAN RE-SET THE MOTOR. EE WAS WITH HIS SUPERVISOR AT THE TIME & P ROPER LOCKOUT PROCEDURES WERE BEING FOLLOWED. WHEN THE SUPERVISOR (VIA RADIO) GAVE THE ELECTRICIAN THE OK TO START (RESET) MOTOR, EE PUT HAND IN VALVE.

EMPLOYEE WAS HELPING CO-WORKER REMOVE ROCK SCREENS FROM DECK AREA SO THEY COULD RETREIVE A WATERHOSE LAYING UNDERNEATH THE SCREENS. AS THE CO-WORKER LET GO OF THE SCREENS TO PICK UP THE HOSE, THE INJURED EMPLOYEE LOST HIS BALANCE AND THE SCREENS FELL ONTO HIM.

EE DURING HIS ANNUAL PHYSICAL WAS TOLD BY HIS DR THAT HE HAD SMALL HERNIA. HE DOES NOT RECALL HOW HE GOT IT WHEN HE GOT IT AND GAVE NO SPECIFIC INSTANCE AS TO HOW IT MIGHT HAVE HAPPENED

INJURED EMPLOYEE WAS REPOSITIONING SCREW JACK STABLIZERS ON THE PORTABLE CRUSHING PLANT. THE 4' BAR USED TO SCREW THE JACKS UPWARD SLIPPED OUT OF THE HOLE AND THE END OF THE BAR STRUCK THE RIG HT SIDE OF HIS HEAD. HE WAS WEARING HARD HAT PROTECTION.

EE WAS FILLING WATER TRUCK AT THE PUMP HOUSE. AS HE ATTEMPTED TO TURN ON THE WATER HE WAS STUNG SEVERAL TIMES ABOUT HIS HEAD AND BODY. HE HAD AN ALLERGIC REACTION.

EE WAS TAKING A MATERIAL SAMPLE FROM CONVEYOR BELT USING A SMALL BUCKET. THE BUCKET FILLED WITH MATERIAL AND OVERTURNED ONTO HIS HAND. HIS HAND WAS CAUGHT BETWEEN THE BUCKET AND A BRACE THAT S UPPORTED THE SCREEN THAT WAS POSITIONED OVER THECONVEYOR BELT.

EE WAS WALKING TO THE CEMENT ELEVATOR WHEN HE TRIPPED OVER AIR HOSE STRIKING HIS RT KNEE ON THE GROUND.

EMPLOYEE WAS PREPARING TO SPLICE A RUBBER CONVEYOR BELT AND CUT HIMSELF WITH A KNIFE AS HE WAS TRIMMING THE BELT.

EE WAS CHECKING FOR AN OIL LEAK ON HIS LOADER. HE STRUCK THE MIRROR, KNOCKING OFF HIS HARD HAT AND CUTTING HIS FOREHEAD.

EE WAS ATTEMPTING TO OPEN THE REAR DOORS ON THE DRAGLINE. HE OPENED ONE DOOR WITH NO PROBLEM. WHEN HE OPENED THE OTHER DOOR, HE PLACED HIS HAND ON THE LEDGE OF THE BOTTOM OF THE FIRST DOOR FOR LEVERAGE TO PUSH THE SECOND DOOR OPEN. AT THE SAME TIME THE WIND BLEW THE FIRST DOOR SHUT ACROSS THE TOP OF HIS HAND AND LACERATED THE TOP OF HIS INDEX AND MIDDLE FINGER ON HIS RIGHT HAND.

EMPLOYEE WAS HELPING TO REPAIR CONVEYOR BELT ANDFELT DISCOMFORT IN HIS HIP AND LEG AS HE WAS CLIMBING DOWN FROM WORK AREA.