Buscar en el registro

WHILE EE WAS HITTING THE BACK SIDE OF A SPIKE PULLER, A PIECE OF METAL CAME UP AND HIT EE IN THE UPPER RT ARM.

WHILE BANGING THE BOTTOM DECK AT THE RECRUSH SCREENS, A STONE FLEW UP AND STRUCK EMPLOYEE, CHIPPING HIS FRONT TOOTH.

WHILE HOLDING A BOARD SUPPORTING A CONVEYOR BELT THAT THE CONNECTOR BOLTS WERE BEING CHISELED OF A SLIVER OF METAL FLEW FROM CHISEL INTO LEFT HAND INDEX FINGER. THE FINGER BECAME INFECTED AFTE R INITIAL FIRST AIDE RESULTING IN LOST TIME DAYS

INSTALLING NEW WIRE CLOTHS ON A SCREEN--IT WAS NECESSARY TO INSERT A PINCH BAR INTO THE BOLT HOLE TO PUSH THE WIRE CLOTH DOWN. WHILE WORKING OUTSIDE, THE BAR CAUGHT THE DRAW PLATER ALSO, PINCH ING THE EE'S FINGER.

EE WAS ADJUSTING UPPER SPUD PIN. HIS RIGHT INDEXFINGER WAS CAUGHT BETWEEN THE PIN & THE SPUD COLLAR. THE SPUD THEN DROPPED & THE PIN STRUCK HIS RIGHT FOOT.

CUT LEFT HAND REMOVING TAPE OFF WIRES.

EE WAS DRIVING STEEL WEDGE BEHIND CONCAVE BLOCK IN CRUSHER WHEN WEDGECAME OUT STRIKING EE ABOVE THE RIGHT EYE.

WHILE EE WAS TIGHTENING NUT ON TOP DECK SCREEN, THE WRENCH SLIPPED OFF THE NUT.

WHILE CENTER PUNCHING A BOLT EMPLOYEE FELT DEBRIS ENTER HIS RIGHT EYE

EMPLOYEE WAS STRUCK IN LEFT EYE BY FORIEGN BODY WHILE ASSITING REMOVAL OF A BEARING. TEMPORARILY REMOVED SAFETY GLASSES NEAR FELLOW EMPLOYEE SING HAMMER AND CHISEL.

EE WAS SWEEPING OFF THE FLOOR MATS WHEN HE GOT DUSTED.

WHILE CHANGING A SCREEN IN THE MILL, EE WAS HOLDING SCREEN SO IT COULD BE KNOCKED INTO PLACE AND ANOTHER EE SWUNG WITH HAMMER MISSING SCREEN AND HITTING EE'S THUMB.

INJURED WAS SWINGING A HAMMER AND PINCHED HIS HAND AGAINST A CONVEYOR.

WHILE BENDING OVER TO UNBOLT TRANSFORMER, FELT PAIN IN RT HIP AND LOWER BACK.

EE TRYING TO UNPLUG BOX OVER IMPACT WITH PRYBAR, STRAIN RIGHT SIDE OF GROIN.

WHILE EMPLOYEE WAS REMOVING A CAP ON 992 LOADER, HE WAS HIT IN JAW WITH 3/4 DRIVE RATCHET.

WHEN REMOVING BATTERY CABLE ENDS & INSTALLING NEW ENDS ON EQUIP. #509434 EE PINCHED HIS LEFT INDEX FINGER BETWEEN THE HANDLES OF THE CRIMPING TOOL.

WHILE LOOSENING A BOLT FROM CRUSHER, BOLT SLIPPED AND EMPLOYEE CAUGHT FINGER BETWEEN BOLT AND CRUSHER FRAME, INJURING PINKY FINGER.

9?514E CLEANING ROCK OUT OF TOP DECK OF SCREEN AND THE HAMMER STUCK. I.NAME FELL AGAINST HANDLE.

EMPLOYEE WAS LINING UP A DRIVE MOTOR ON THE BIN VIBRATOR USING A PRY BAR. HE WAS PRYING THE MOTOR OVER WHEN HIS BAR SLIPPED CAUSING HIM TO FALL OVER THE SIDE OF THE BIN ABOUT 15' TO THE GROUND BELOW. HE LANDED WITH MOST OF HIS WEIGHT ON HIS LEFT FOOT (HEEL). HE ALSO HAS A CUT ON HIS LEFT HAND FROM THE PRY BAR SLIPPING .

EMPLOYEE WAS CUTTING A PIECE OF RUBBER HOSE WITH A KNIFE.

INJURED WAS PRYING A SCREEN CLOTH WHEN THE PRY BAR SLIPPED AND HIT HIKM IN THE UPPER LIP.

I.NAME CUTTING PIECE OF CONVEYOR BELT TO INSTALL PATCH IN RC.2 CONVEYOR AND CUT HAND WITH KNIFE.

UNPLUGING CRUSHER FULL OF STONE STONE BROKE LOST BALANCE JUMPED ON CATWALK SPRAINED L ANKLE

REPLACING BUCKET ON BACK HOE, SWING ING SLEDGE HAMMER FELT PAIN IN BACK

VERY COLD CONDITIONS WEARING HEAVY GLOVES SWINGING HAMMER ON A WRENCH THE WRENCH SLIPPED CAUSING RIGHT AHND WITH HAMMER TO JAM.

WHILE JACKING UP A SNUB PULLEY PREPARING TO SPLICE A 54" BELT THE PIPE SUPPORTING THE COME-A-LONG JERKED,CAUSING A SLEDGE HAMMER WHICH WAS ON THE BENT PULLEY TO FALL ABOUT 4 TO 5 FEET,STRIKING INJURED ON THE HEAD.LACERATION REQUIRED SUTURES

WHILE CUTTING OFF OLD CONVEYOR BELT BELT KNIFE SLIPPED AND EE CUT HIS LEFT LEG.

CUTTING RUBBER BELT FOR SKIRT,KNIFE SLIPPED AND CUT THUMB.CUT REQUIRED 3 STITCHES.TREATED BY (NAME)535 UNION BLVD,TOTOWA,NJ.

EMPL INJURED FINGER WITH WRENCH WHILE TURNING VALVE OF PUMP AT DOCK.REQUIRED STITCHES.

WHILE SWINGING SLEDGE HAMMER TO DRIVE WEDGE IN 5 1/2' CRUSHER EMPLS LEFT HAND SLIPPED OFF HAMMER & HE PULLED SOMETHING IN RIGHT ARM.

I.NAMES'HAND STRUCK BY HAMMER WHILE HOLDING SIDE PLATE OTHER EMPL WAS SWINGING HAMMER AND HANDLE CAUGHT ON BEAM CAUSING IT TO MISS PLATE AND HIT I.NAME.

WHILE TRAINING 4A CONVEYOR THE BOLT SUDDENLY LOOSENED AND INJURED PINCHED HIS FINGER BETWEEN WRENCH AND CONVEYOR FRAME.

CLOSING CRUSHER SWINGING SLEDGE HAMMER STRAINED L WRIST

WHILE SPIKING WENT FROM LEFT TO RIGHT MOTION USING THE HAMMER AND CREATED A SPRAIN IN HIS LEFT ELBOW.

LAYING IN TWISTED POSITION CLEANING 3/8 CHUTE WITH SHOVEL.WHEN PUSHING UP AND TWISTING SHOVEL FELT SHARP PAIN IN LOWER BACK.

TORQUE WRENCH SLIPPED OFF DRIVESHAFT BOLT OF 992 LOADER.

WHILE SHOVELING STONE ON THE SHUTTLE, EMPLOYEE STRUCK RIGHT HAND ON GUARD RAIL.

WHILE TIGHTENING BOLTS ON SPIDER 42-45 EMPL BENT DOWN TO MOVE ANOTHER WRENCH WHEN WRENCH THEY WERE USING FELL HITTING EMPL IN BACK.

EMPLOYEE HAMMERING NAIL INTO BEAM AND SOMETHING FLEW INTO HIS EYE.

CHAIN JACK SLIPPED CAUSING TAIL PULLEY SECTION TO DROP PINCHING EMPLS FINGER.

HOLDING LARGE MOTOR LEED IN LEFT HAND AND STRIP ING INSULATION THE KNIFE SLIPPED AND CUT LEFT WRIST.

WHILE DRIVING OUT TRACK PIN WITH PUNCH & HAMMER HAMMER GLANCED OFF PUNCH HITTING EMPL IN CHIN. EMPL WAS HOLDING PUNCH WITH LONG PLIERS.

WHEN HITTING SCREENDECK WITH S LEDGEHAMMER I.NAME LOST HIS FOOTING & HIT HIS FINGER BETWEEN HAMMER HANDLE & SCREENDECK

WHILE TAPPING A PIECE OF WOOD INBETWEEN TO CONCAVE, THE WOOD SPLINTERED AND W E NT INTO HIS LEFT EYE.

CHISEL WAS BEING USED TO SEPERATE TWO PIECES OF METAL ON DOZER.WHILE BEING HIT WITH HAMMER,CHISEL FLEW OUT AND STRUCK MAN ON SIDE OF FACE.

EMPLOYEE WAS STRIPPING OUTSIDE COVER OD ELECTRICAL WIRE,WHEN KNIFE SLIPPED AND CUT INTO HIS RING FINGER ON HIS LEFT HAND.

WHILE SHOVELING OUT ROCK FROM B EHIND THE JAW I.NAME SHOVEL SLIPED & HE FELL AGAINST THE JAW & TWISTED HIS RT.ARM

INJURED LEFT INDEX FINGER WHEN RATCHET BROKE AND HANDLE SLAMMED DOWN ON FINGER.

I NAME WAS SWIN1ING THE SLEDGE HAMMR WHILE I NAME WAS TACKING THE BUCKET FOR I NAME. I NAME WAS S TANDING RIGHT IN F RONT AND GOT HIT IN THE STOMACH AREA WITH THE SLEDGE HAMMER