Buscar en el registro

Employee was installing bucket elevator's equipment when the bar he was holding slipped causing the bucket to jerk his arm & shoulder. *Note: Employee was released to return to work with restr ictions. He never returned to work and therefore was terminated.

EE was tightening clamp on waterhose with a screwdriver. Screwdriver slipped jabbing into left hand palm.

EE WAS CUTTING SOME SKURTBOARD FOR THE SCREENS AT THE AGG PLANT. HIS KNIFE SLIPPED FROM HIS HAND AND CUT A WOUND ON THE INSIDE OF HIS LEFT FOREARM. THIS REQUIRED FOUR SUTURES TO CLOSE THE WOUND. THE DOCTOR RELEASED HIM TO WORK THAT SAME NIGHT.

THE INNER CAGE MILL HAMMERS AND CAGE WERE BEING ASSEMBLED. SMALL WOODEN BLOCKS WERE BEING PLACED UNDER EACH BOLT TO SUPPORT IT IN THE RECESSED POSITION. AS THE BAR WAS BEING USED TO RAISE THE RING, PRY BAR SLIPPED AND THE RING DROPPED APPROX 2 INCHES MASHING THE TIP OF THE 4TH FINGER. FINGER TIP BONE WAS FRACTURED.

INSTALLING A REDUCER TO RADIATOR USING A PIPE WRENCH. WAS TIGHTENING REDUCER TO RADIATOR, PIPE WRENCH SLIPPED & CUT THUMB ON LEFT HAND.

INJURED WAS USING A LONG BAR IN INSTALLING TRACKS ON A DOZER WHEN HE STRAINED HIS LOWER BACK.

EE WAS CLOSING BOTTOM DOOR ON A RAIL CAR; THE DOOR STUCK. EE PULLED EXTRA HARD ON A 5 FT. PRY BAR HE WAS USING. THIS RESULTED IN HIM BEING IN AN AWKWARD POSITITON CAUSING HIM TO TWIST HIS RIGH T ANKLE.

INJURED WAS SWINGING A SLEDGE HAMMER AND CAUGHT FINGER BETWEEN SLEDGE HANDLE AND STEEL STRUCTURE HE WAS WORKING IN A CONFINED AREA.

INJURED WAS USING A CHAIN HOIST TO LIFT AN MCC CABIENT INTO POSITION. HE APPARENTLY STRAINED HIMSELF WHILE PULLING ON THE CHAIN HOIST HANDLE AND CAUSED A HERNIA.

EMPLOYEE WAS OPERATING TESTING RIG, DRILLING FORCLAY SAMPLES. WHILE SHOVELING WASTE SAND FROM DRILL AUGER, EMPLOYEE PULLED MUSCLE IN LEFT ELBOW.

THE EMPLOYEE WAS USING A POCKET KNIFE TO CUT THE SLOTS ON THE LID OF A PLASTIC 5 GALLON BUCKET. AS THE EE APPLIED PRESSURE THE BLADE FOLDED BACK, LACERATED THE LITTLE FINGER ON THE RIGHT HAND. THREE SUTURES WERE USED TO CLOSE THE CUT.

EE WAS CONSTRUCTING STEPS FOR A CAT WALK, A CROWBAR FELL OFF THE CAT WALK AND THE EE CAUGHT IT WITH HIS RIGHT HAND TO KEEP IT FROM HITTING HIM

THE EE WAS SHOVELING MICA TO A HOPPER WHEN SOME OF THE MATERIAL GOT INTO HIS RIGHT EYE. THE EYE WAS RINSED WITH EYEWASH BUT INFLAMMATION AND INFECTION ENSUED OVER A FOUR DAY PERIOD. A DR WROTE A PRESCRIPTION FOR EYE DROPS.

EE HAD STARTED CLEANING RAILCARS HE TOOK A STEEL BAR WEIGHING APPROX. 15 LBS AND STARTED OPENING BOTTOM SLIDES ON A RAILCAR IN THE TWISTING MOTION OF OPENING THE SLIDE HE STRAINED THE MUSCLES IN HIS LOWER BACK.

WHILE PREPARING TO DRILL TEST HOLE, EE WAS CHOPPING BRANCH OFF A TREE AND AXE SLIPPED OFF BRANCHAND CUT EE'S BIG TOE ON RIGHT FOOT.

THE EE WAS CUTTING SOME BELTING USING A 2X4 AS BACKING WHEN THE 2X4 SLIPPED HE CUT HIS LEFT RING FINGER ABOUT 1 INCH FROM END FROM ONE SIDE TO THE OTHER 4 STETCHES WERE APPLIED.

EMPLOYEE WAS CUTTING A CARDBOARD PATTERN WITH A KNIFE. THE KNIFE SLIPPED STRIKING THE EMPLOYEE IN THE LEFT THUMB. THE LACERATION REQUIRED 6 STITCHES TO CLOSE.

EE WAS ATTEMPTING TO CUT A 3/4 PLASTIC PIPE WITH A POCKET KNIFE. THE KNIFE SLIPPED STRIKING THE EE IN THE LEFT PALM REQUIRING 4' SUTURES TO CLOSE WOUND.

EE WAS WORKING INISDE DRYER TIGHTENING THE STEAM LINE UNION. THE CHEATER BAR SLIPPED OFF THE CHAIN WRENCH STRIKING EE ON HELMET SAFETY GLASSES AND NOSE BRIDGE.

EE WAS HAMMERING AS WELL AS USING CHIPPING HAMMER & CUTTING TORCH & WRENCHES HE HAD BEEN HELPING IN MAINT ENANCE ALL DAY WHEN THAT EVENING IT STARTED BOTHERING HIM HE REALLY DIDNT KNOW WHEN H E GOT THE PIECE OF METAL IN HIS EYE AT FIRST HE THOUGHT MAYBE HE HAD WELD BURN IT BUT IT HAD A PIECE OF METAL IN IT

EMPLOYEE WAS STRIPING INSULATION FROM AN ELECTRICAL WIRE WHEN THE KNIFE SLIPPED

EMPLOYEE WAS HLEPING PUT A MASTER LINK IN D-6 DOZER TRACK. HE WAS HOLDING HT EPIN WHILE ANOTHER EMPLOYEE WAS DRIVING IT IN. A PIECE OF METAL BROKE OFF HTE PIN AN HIT EMPLOYEE IN LEFT SIDE OF NECK. PUNCTURE WOUND IN LEFT SIDE OF NECK.

EMPLOYEE WAS PRYING ON A ROCK LODGED IN THE JAW CRUSHER. THE PRY BAR SLIPPED & THE BAR MASHED RIGHT HAND INDEX FINGER AGAINST THE CRUSHER HOUSING.

TEAM MEMBER WAS WORKING ON JUMBO DRILL FEEDER WHEN THE WRENCH HE WAS USING SLIP-TEAM MEMBER FELL OVER SOME STONE & DOWN UNDER THE DRILL BOOM.

EMPL DRIVING PIN ON TRACKLOADER INTO LINK OF TRACK. SMALL PIECE BROKE FROM PIN WHEN STRUCK WITH SLEDGEHAMMER. BECAME A PROJECTILE AND ENTERED EMPL LEG AT CALF HEIGHT. LODGED DEEP WITHIN LEG. NO IMPAIRMENT. EMPL IS OK.

THE 120 ELEVATOR WAS BEING CHECKED FOR MISSING PINS IN THE CHAIN. AS THE CHAIN WAS BEING ROTATED SO THAT ALL OF THE CHAIN COULD BE CHECKED THE ELEVATOR FREE WHEELED AND PINNED EMPLOYEE'S HAND BETWEEN THE ELEVATOR DOOR AND THE BAR BEING USED TO ROTATE CHAIN.

THE PROPER SIZE WRENCH WAS USED TO TIGHTEN THE ALTERNATOR BOLT. THE BOLT BEING TIGHTENED WAS IN AN AKWARD POSITION AND MAY HAVE CAUSED OR CONTRIBUTED TO THIS ACCIDENT.

TEAM MEABER WAS HELPING TO KNOCK OUT BRGS. FROM A JOY DRILL HAMMER WHILE USING A HAMMER AND CHISEL A PIECE OF METAL FLEW INTO HIS RIGHT EYE.

EMPL CHECKING OIL LEVEL IN PLANETARY GEARBOX ON BACKHOE. WAS REPLACING PLUG IN OIL CHECK HOLE AND TWISTED BODY WHILE PULLING UP ON WRENCH. RESULTED IN LOWER BACK PAIN DIAGNOSED AS MUSCLE STR AIN.

79969 TO THE SALLEGED INJURY EMPLOYEE WAS SWEEPING FLOOR WITH PUSH BROOM HE CAME TO HIS FOREMAN & SAID WHILE SWEEPING HE FELT A PAIN IN HIS BACK & ASKED TO GO TO THE DOCTOR

EMPLOYEE WAS LOWERING A WINCH-AND-CABLE OPERATED CAR LOADING CHUTE. THE COUTERWEIGHT CABLE BROKE, CAUSING THE WINCH TO WINDMILL STRIKING THE EMPLOYEE ON BOTH HANDS AND STOMACH.

MECHANIC WAS DRIVING A LOADER BUCKET PIN WITH A SLEDGE HAMMER.A METAL SLIVER FROM THE HAMMER STRUCK THE MECHANICS LOWER CHIN.

EMPLOYEE WAS CUTTING STRETCH WRAP ON A PALLET OF BAGGED MATERIAL AND THE KNIFE CUT HIS LEFT INDEX FINGER AT THE KNUCKLE. CUT REQUIRED 4 STITCHES.

CUTTING CONV KNIFE CUT END OF BELT STUCK IN LEG

CUTTING TAPE OFF PUMP TRUCK HOSE. KNIFE SLIPPED AND STUCK IN HAND BETWEEN THUMB AND INDEX FINGER. STITCHES WERE REQUIRED.

TWO EMPLS WERE TRYING TO REMOVE 4 1/2" COUPLER FROM 4' LONG JACKSHAFT. THEY HAD ATTACHED GEAR PULLER TO COUPLER & WERE HITTING COUPLER WITH HAMMER. HAMMER MISSED COUPLER & HIT EMPL IN FACE. EM PL RECEIVED TWO STITCHES IN NOSE.

INDIVIDUAL WAS COMPLETING 1ST DAY OF TRAINING (NEW MINER HIRE). HE WAS ALLOWED TO USE A SLEDGE HAMMER TO BREAK A WEDGED ROCK. HIS TRAINING CONTINUED ON THE 10TH & 11TH. THE MORNING OF THE 12TH , HE ALLEGED HE HAD INJURED HIS BACK WHILE BREAKING A ROCK ON THE EVENING OF THE 9TH OF APR.

EMPLOYEE WAS USING PRY BAR TO DISMANTLE SCREEN BASE, PRY BAR SLIPPED AND STRUCK EMPLOYEE IN MOUTH BREAKING TWO UPPER FRONT TEETH. DENTAL TREATMENT REQUIRED.

LOOSENING ANUT SMASHED FINGER BETWEEN WRENCH HANDLE AND ANOTHER BOLT.

WORKING ON DRIVELINE STRUCK MIDDLE FINGER ON LEFT HAND WITH HAMMER.

WHILE USING COMEALONG TO CHANGE STARTER BOX COMEALONG RATHCET SLIPPED JERKING EMPL'S ARM INDUCING CERVICAL SPRAIN.

REPLACING BELT ON SCREEN USING PIPE WRENCH TO TRUN WRENCH SLIP HIT FINGER WRENCH SLIPPED IT BROKE 3 FINGER ON R HAND ALSO CUT FINGER

EMPLOYEE WAS DRIVING A PIN INTO CYLINDER WITH A HAMMER WHEN A BUR CAME OFF OF THE PIN AND GOT IN HIS FINGER. HE WENT TO A DOCTOR ON -12-7-89 AND GOT THE SPLINTER REMOVED AND THE DOCTOR WROTE HIM A PRES. FOR ANTI-BIOTICS.

EMPLOYEE WAS CLEANING OFF WALKWAY WITH IRON BAR. WHILE ATTEMPTED TO BRAKE LOOSE HARD MATERIAL BAR HIT SOMETHING SOILID AND THREW EMPLOYEE HAND AGAINST ANOTHER PIECE OF METAL CUTTING FINGERS O N LEFT HAND.

EMPLOYEE WAS ASSISTING PLANT OPERATOR TO RAISE SPRING LOADED GRIZZLY FEEDER MOTOR BASE WITH PRY BAR TO REPLACE A BROKEN COIL SPRING THE PRY BAR SLIPPED & THE HAND-HELD END STRUCK EMPLOYEE ON R T FACIAL CHEEK CAUSING 3/4IN LONG LACERATION WHICH REQUIRED SUTURES

WHILE EMPL WAS CLOSING RAIL CAR DOOR A IRON BAR HE WAS USING SLIP AND HIT THE SIDE OF R EYE CAUSING A SMALL CUT

EMPLOYEE WAS BEATING ON OUTSIDE OF A BEND TO DISLODGED MATERIAL INSIDE BEND AND THE HAMMER MISSED ITS MARK AND THE HANDLE HIT HIM IN THE SHOULDER. HE WENT TO THE DOCTOR ON 12-15-88 AND WAS TOL D HE HAD A FRACTURE ON THE END OF HIS HEMERUS.

EMPLOYEE WAS USING PUSH BROOM TO CLEAN CONCRETE FLOOR IN THE DRYER ROOM OF THE MICA MILL & STRUCK HIS RT.ELBOW AGAINST FLOOR MOUNTED STEEL LOCKERS ADJACENT TO BLDG.WALL

PRYING ROCKS FROM CRUSHER JAW-PRY SLIPED AND MASHED FINGER-INJURY NOT SIGNIFICATE UNTIL JULY 14TH- DUE TO INFECTION.

EMPLOYEE WAS USING 1/4 IN HEMP ROPE TO PULL DUMP TRAILER TARP ACROSS DUMP BED OF TRAILER FINGER CAUGHT IN ROPE WHILE PULLING TARP AND CAUSED BONE FRACTURE