Esta búsqueda
Envíame un correo cuando un nuevo incidente coincida con estos filtros. Un correo de confirmación; cancela la suscripción cuando quieras.
EE WAS CUTTING A PIECE OF 3/4" SEAL TITE WITH A SERRATED BLADE FROM A LEATHERMAN TOOL AND THE KNIFE SLIPPED WHEN HE CUT THROUGH THE SEAL TITE AND CUT HIS FINGER. THE CUT REQUIRED SUTURES FOR T REATMENT.
EE STATED WHILE SWEEPING STIARS SHE FELT SOMETHING IN HER EYE. REQUESTED TO SEE DR ON 2-12-03.
WHILE DISLODGING CHUNKS ON STRUCTURE OF W4900 BELT THE PRY BAR SLIPPED AND HE FELT PAIN IN LOWER BACK (FIRST LOST DAY 10/1/02).
INJURED WAS USING BREAKER BAR TO BREAK UP BUILD UP IN A GYPSUM FEEDER. WHEN BLOCKAGE BROKE LOOSE, WORKED SMASHED HAND FINGER BETWEEN T BAR AND SHOOT.
FOREMAN WAS WATCHING WORKER HAMMER ON STEEL SHAFT. PIECE OF METAL STRUCK FOREMAN IN NECK, CAUSING A LACERATION. FOREMAN WAS BOTHERED BY NECK PAIN ON 5/20/02 & HAD DOCTOR CHECK IT. PIECE OF MET AL IS STILL IN NECK & NEEDS TO BE REMOVED SURGICALLY.
EE WAS WORKING IN THE SHOP & FELT A LITTLE TWIST IN HIS LOWER BACK AFTER SOME HARD PULLING ON A WRENCH. SAW DOCTOR 5/1/02, 1ST LOST DAY 5/2/02.
WHILE WORKING IN MILL HAMMER HEAD CAME OFF & STRUCK WORKER IN MOUTH, BREAKING TOOTH.
2 MINERS WERE USING AIR HAMMER TO LOOSEN HARDENED CEMENT AND MILL BALLS FROM THE WALL OF THE BALL MILL. A LARGE PIECE BROKE LOOSE AND STRUCK THE VICTIM.
MINER WAS WORKING IN BALL MILL W/O OTHER MINERS. A BALL WAS KNOCKED LOOSE WHILE HAMMERING. THE BALL STRUCK MINER IN THE EYE SOCKET.
WHILE REMOVING U-JOINT FROM HAUL TRUCK EE WAS USING HAMER TO DRIVE U-JOINT APART AND A FRAGMENT OF THE HAMMER HEAD CAME OFF AND HIT HIM IN THE ARM.
EE WAS PRYING COPPER PLATE OFF BREAKER BAR N CRUSHER WITH PRY BAR, PRY BAR SLIPPED AND EE HIT LEFT ELBOW.
EMPLOYEE WAS INSTALLING A BEAM, USING AN 80 LB HAMMER. FELT PAIN IN THE ARM/ SHOULDER AREA. RECENT SUBSEQUENT TREATMENTS NOW MAKES THIS INCIDENTREPORTABLE, AS OF 5/16/00.
EE WAS REMOVING CEILING TILE AS HE WAS REMOVING THE TILE MATERIAL FELL FROM THE TILE OVER GLASSES INTO RIGHT EYE. NO LOST TIME RX DRUGS
EMPLOYEE WAS PULLING ON A COME-A-LONG WHEN HE FELT A PULL IN THE GROIN AREA. EMPLOYEE DID NOT REQUEST TO SEE A PHYSICIAN UNTIL 4-13 WHEN THE SYMPTOMS SEEMED TO WORSEN.
WHILE REMOVING CONCRETE FORMWORK THE FORMWORK SUDDENLY RELEASED UNDER PRESSURE FROM CROW BARS WHICH WERE BEING USED TO PRY THE FORMWORK OFF. THEFORM SPRANG OFF AND TRAPPED HIS HAND AGAINST THE SCAFFOLD PLATFORM POLE.
EE WAS REINSTALLING THE DRAG BOX IN THE KC16 AREA AND THE BOX GOT CAUGHT BY THE CHUTE AND EE ATTEMPTED TO USE A PRYBAR TO FREE IT, BUT THE PRYBAR CAME OUT OF HIS HANDS STRIKING HIS RIGHT AND L EFT SHIN. HE RECEIVED 8 SUTURES ON RIGHT SHIN AND CONTUSION LEFT SHIN. X-RAY NEGATIVE.
HE WAS REMOVING CHAINS FROM CEMENT KILN THAT IS FULL OF DUST.
EE WAS MOVING DUCTWORK WITH A CHAIN HOIST WHEN A SHIPPING BRACE BROKE ALLOWING THE SUSPENDED METAL EXPANSION JOINT TO SWING STRIKING THE SURFACEOF THE EMPLOYEE'S RIGHT UPPER ARM BRUISING AND C AUSING TENDERNESS AT THE AREA OF CONTACT.
EE WAS STRIPPING 500 MCM WIRE, KEEPING AN EYE ON WORKERS ABOVE. THE KNIFE SLIPPED AND CUT THE FINGER.
EE WAS HOLDING PIN WHILE OTHER EE WAS DRIVING PIN INTO A CHAIN. THE HAMMER GLAZED OFF OF CHAIN& HIT EE ON LEFT POINT FINGER,INJ EE CONT WORK UNTIL 12/2/99 & REQUESTED TO SEE DR FOR SWOLLEN F INGER HIS LEFT POINT FINGER IS FRACTURED & IS NOW IMMOBOLIZED BY SPLINT
EMPLOYEE WAS CUTTING OPEN A FORKLIFT FILTER BOX WITH A KNIFE WHEN HE CUT HIS LEFT THUMB. LACERATION REQUIRED STITCHES.
EE WAS WORKING IN #3 KILN USING A BRICK BAR AND RIVET GUN OVER HIS HEAD. EMPLOYEE DEVELOPED PAIN IN HIS RIGHT ELBOW. CONTINUING PROBLEMS WITH ELBOW MAKES THIS A REPORTABLE INJURY.
THE EMPLOYEE WAS CLEANING OUT THE INSIDE OF OFF SPEC. #1 HOPPER THROUGH AN INSPECTION DOOR, USING A LONG BAR. WHILE CLEANING OUT THE INSIDE OF OFF SPEC. #1 HOPPER, THE EMPLOYEE ALLEGEDLY SMASH ED HIS FINGER AGAINST THE HOPPER WITH THE FORCE OF THE BAR.
THE EE WAS PRYING ON THE DOOR OF THE #1 FINISH MILL SEPARATOR FAN TO REMOVE IT. THE EE WAS USING A PINCH BAR WHICH SLIPPED OFF THE DOOR DISLODGING A SMALL PIECE OF STEEL, WHICH CAUSED A PUNCTU RE WOUND TO HIS LEFT HAND AT THE BASE OF THIS THUMB.
THE EMPLOYEE WAS PULLING FLOOR TILES WITH PULLER. THE EMPLOYEE'S HAND SLIPPED OFF THE HANDLE, STRAINING TENDONS IN LEFT WRIST.
THE EE WAS PRYING UP ON THE 1104 DRAG CONVEYOR WITH AN 18' PINCH BAR. THE PRY BAR SLIPPED OUT FROM UNDER THE CHAIN AND HE HIT HIS FINGER ON A PIECE OF SHARP STEEL, CUTTING HIS RIGHT MIDDLE FIN GER.
THE EMPLOYEE WAS REMOVING CONES FROM THE 1009 DUST COLLECTOR TUBE SHEET WITH AN 8# SLEDGE HAMMER. WHILE SWINGING THE HAMMER, THE EMPLOYEE FELT SOMETHING POP IN HIS BACK.
EE WAS OPENING THE POLYCOM DOORS WITH A LONG PRY BAR, WHEN HE FELT SOMETHING SNAP IN HIS BACK.
THE EE WAS TRYING TO MOVE A COUPLING HUB WITH A BAR AND HAMMER. THE EE HIT THE BAR WITH THE HAMMER AND THE BAR PINCHED HIS HAND AGAINST THE MOTOR ON THE COMPRESSOR.
EMPLOYEE WAS BREAKING UP FROZEN CHUNKS OF COAL WITH A SLEDGE HAMMER WHEN A CHUNK OF COAL BROKE & HIS HAND HIT THE LATCH ON THEDOOR OF THE COAL CAR CAUSING A CRUSH TYPE TEARING LACERATION TO TH E LEFT LITTLE FINGER
EMPLOYEE WAS IN THE BASKET OF THE MAN LIFT LOWERING A CABLE REEL ASSEMBLY DOWN FROM BELT TO BELT AREA, AS HE WAS TRYING TO MOVE THE REEL INTO THE MAN LIFT USING A ROPE TO GUIDE IT, THE STONE O N THE PILE MOVED AND THE CABLE REEL ROLLED DOWN THE RECLAIM PILE AND THE ROPE CAUGHT EMPLOYEES HAND AND FINGERS CAUSING A LACERATION AND FRACTURE TO FINGER.
EMPLOYEE WAS TIGHENING ELECTRIC DRILL PRESS W/LEY CHECK WHEN KEY CHECK SLIPPED OFF AN EMPLOYEES HAND WAS CUT ON EDGE OF DRILL BUT.