Buscar en el registro

EE struck a ceramic impact panel with a hammer in an effort to dislodge it when a piece of the ceramic went under EE's glasses and entered EE's left eye.

Employee was attempting to cut a rubber curtain with a razor knife when employee slipped and cut right forearm.

Employee was removing a tooth from an excavator bucket and was using a hammer to break it loose. A piece of metal struck EE on the chin causing a laceration injury.

Employee was using a utility knife to cut a zip-tie from a cable. When the zip-tie was cut the momentum of the knife caused it to strike EE's opposite arm causing a laceration to EE's forearm.

Employee was using a knife to pry open a dust collection cartridge when it slipped and cut left thumb.

The employee used the back edge of pocket knife blade to remove the cap from a bottle of chalk for a chalk line. When the cap released, the front of the blade cut right thumb. The laceration required 3 stitches.

The injured employee was working as part of a team installing an I-beam on a construction project. While attempting to move the beam in place with a pry bar, the beam shifted downward and out striking the employees left thumb. It resulted in a fracture and laceration.

The employee was attempting to remove a hose with a wrench when ee strained left hand.

Employee cutting wire mesh with shears when shears slipped and employee cut his finger on exposed wire mesh.

While lifting primary crusher toggle for repair, lifting device broke and employee fell approx. 3-4 feet on top of falling hydraulic toggle.

Employee was tightening the main shaft nut when the tightening device bounced off of the knocker wrench and his right hand ring and little finger were pinched against the main shaft nut, requiring stitches to both, and a break on the tip of the little finger.

Employee injured his left index finger when a knocker wrench recoiled off of a nut while the employee was hitting the knocker wrench with a sledge hammer.

While changing screen cloth injured employee's left hand was struck by a hammer being used by another employee.

Employee held a bolt head while trying to loosen the bolt with an impact wrench. Torque on the wrench cut through the glove and his left hand, requiring stitches to the wound.

While clearing a jam, the employee pinched his left little finger between the pipe he was using and the bottom of the chute.

Employee was prying with a crowbar when he slipped and struck his left hand on the conveyor frame.

Supervisor was cutting a plastic tie-down which was securing an electrical shutoff line to a pit pump hose when the knife cut through the tie-down and punctured the left forearm of the employee. 3 sutures were required to close the wound.

While the employee was tightening the locking nut on a crusher, a sliver of metal splintered off of the pin hammer that was being struck with a sledge hammer by the employee. The sliver lodged in the employee's left upper arm.

Employee was striking a pin on an excavator adaptor with a hammer when he re-injured his wrist. The injured wrist has been reported as an original injury dated 5/15/02. The employee has received 2 weeks of restricted duty as of 3/28/05, the date of the first evaluation for injury.

Employee was striking a wedge pin that holds concrete forms in place when the combination of the hammer striking the pin and the pressure release of the pin caused the pin to ricochet off the concrete form frame and strike the employee in the mouth. The injury required 3 stitches and dental work.

WHILE USING A PRY BAR TO REPOSITION EX1100 SHOVEL TRACKS FOR LOADING, THE TRACK SHIFTED AND PULLED THE PRY BAR FROM THE EMPLOYEE'S HAND AND STRUCK HIS LEG ABOVE THE RIGHT KNEE. THE SUDDEN MOVE MENT CAUSED A MUSCLE STRAIN TO HIS LOWER BACK.

EE WAS STRIKING A KNOCKER WRENCH WITH A SLEDGE HAMMER AND MISSED THE WRENCH. THE HAMMER CONTINUED DOWN TO STRIKE THE EE ON HIS RIGHT FOOT IN THE SHOELACE AREA.

WHILE LOOSENING BOLTS EE STRAINED HIS GROIN AREAHIS DISCOMFORT WAS REPORTED IMMEDIATELY BUT HE DID NOT REQUIRE MEDICAL ATTENTION UNTIL 7/16/01. HE WAS LIMITED TO LIFTING 10LB FOR 1 WEEK.

EE SWUNG A SLEDGE HAMMER AT A KNOCKER WRENCH WHILE TIGHTENING JAW BOLTS. THE HAMMER MISSED THE WRENCH HANDLE & HE PINCHED HIS HAND BETWEEN THE THUMB & FINGER. 4 SITCHES WERE REQUIRED.

WHILE USING A PRY BAR TO LINE UP A PIECE OF SCREEN CLOTH, THE EE PULLED ON THE BAR AND THE BAR SLIPPED STRIKING EE ON THE FOREHEAD WITH THE ENDOF THE BAR. 5 STITCHES WERE REQUIRED TO CLOSE TH E LACERATION

THE EMPLOYEE WAS LOOSENING A WEDGE BOLT NUT WITH A KNOCKER WRENCH AND SLEDGE HAMMER. AFTER STRIKING THE WRENCH WITH THE HAMMER, THE WRENCH BOUNCED OFF THE NUT AND STRUCK THE EMPLOYEE ON HIS SA FETY GLASSES AND CUT HIS RIGHT CHEEK, REQUIRING STITCHES.

EE WAS HOLDING KNOCKER WRENCH ON NUT. SLEDGE HAMMER WAS BEING USED TO LOOSEN BOLT. HAMMER GLANCED OFF WRENCH STRIKING EE ON THE FINGER.

WHILE HELPING TO TIGHTEN BOLTS ON THE PRIMARY CRUSHER, THE EE WAS HOLDING A KNOCKER WRENCH IN PLACE. ANOTHER EE WAS HITTING THE HANDLE OF THE WRENCH WITH A SLEDGE HAMMER. THE HAMMER DEFLECTED OFF THE WRENCH HANDLE STRIKING THE EE ON THE BACK OF HIS HAND.

EE WAS CUTTING 12INCH SECTON OF RUBBER HOSE WITHA UTILITY KNIFE. AS HE FINISHED CUTTING THE SLITIN THE HOSE, THE UTILITY KNIFE SLIPPED OFF OF THE HOSE CUTTING HIS RIGHT THIGH. 4 STITCHES WERE REQUIRED FOR MED TREATMENT

EE WAS TIGHTENING BOLTS ON JAW CRUSHER. LARGE SPUD WRENCH BEING USED SLIPPED FROM WORN BOLTS. EE S RIGHT HAND CONTACTED EXPOSED THREADS ON END OF BOLT, CUTTING HAND BETWEEN THUMB AND INDEX FIN GER.

EE STATED THAT HE WAS USING A HAND SHOVEL TO STEM A BLAST HOLE. WHEN HE TWISTED HIS BACK AND THUS PINCHED A NERVE IN HIS LOWER BACK.

EE STATED HE WAS DRIVING A STEEL PIN INTO A CONCRETE FORM WITH A HAND HAMMER. THE PIN BROKE CAUSING A PIECE OF THE PIN TO PENTRATE THE RIGHT HAND BETWEEN THE MIDDLE AND INDEX FINGER.

EMPLOYEE WAS HELPING REPLACE A RETURN ROLLER ON A CONVEYOR. HE WAS USING A PRY BAR TO HELP INSTALL THE ROLLER WHEN THE BAR SLIPPED. THIS CAUSED HIS ELBOW TO HIT THE CONVEYOR FRAME.

EE WAS USING A PRYBAR TO HELP REPLACE A CONVEYOR ROLLER, WHEN THE BAR SLIPPED IT MASHED HIS FINGER AGAINST THE CONVEYOR FRAME RESULTING IN A FINGER LACERATION. THIS LACERATION REQUIRED STITCHE S.

EMPLOYEE WAS LINING UP THE BOLT HOLES IN THE BULLY PAN, WHEN THE PRY BAR HE WAS USING SLIPPED, STRIKING HIM ON THE RIGHT TEMPLE.

EMPLOYEE WAS CUTTING A CARDBOARD BOX WITH A POCKET KNIFE WHEN THE KNIFE SLIPPED CUTTING THE LEFT HAND

EMPLOYEE WAS USING A HAND HAMMER TO LOOSEN A DRILL STEEL COUPLING. WHILE HOLDING THE COUPLING HE STRUCK HIS FINGER WITH THE HAMMER.

EMPLOYEE WAS USING A PIPE WRENCH TO TIGHTEN A PIPE COUPLING WHEN HE PULLED A MUSCLE IN HIS BACK.

EMPLOYEE WAS LOOSENING THE BOLT ON A BRAKE CALIPER WHEN THE END OF THE WRENCH HE WAS USING BROKE OFF. THE BROKEN END FLEW UP STRIKING HIM ON THE LEFT SIDE OF HIS HEAD.

EMPLOYEE WAS PULLING A WEDGE OUT OF THE JAW CURESHER AND STRAINED HIS BACK