Mining Incidents

TRIANGLE QUARRY Metal/Non-Metal

Wake Stone Corp · Surface
Controlada por Vulcan Materials Company
Raleigh, Wake Condado, NC  ·  Activa
ID de mina MSHA: 3101940

Seguir esta mina

Avísenme cuando se presente un nuevo incidente de la MSHA en TRIANGLE QUARRY.

Muertes
0
Incidentes totales
24
Años en registro
2000–2025
Último incidente
Jun 2025
Historial de cumplimiento
Citaciones de MSHA desde 2000
89
citaciones
22
significativas y sustanciales
$10,682
multas propuestas
$9,327
pagado a la fecha
Fuente: datos de violaciones de MSHA, actualizados semanalmente.
Tasas de seguridad trimestrales
Citaciones por millón de horas trabajadas, según lo reportado a MSHA
Trimestre Horas trabajadas Citaciones S&S Por 1M hrs
2025 Q4 15,145 0 0 0.0
2025 Q3 11,016 0 0 0.0
2025 Q2 10,547 0 0 0.0
2025 Q1 4,476 0 0 0.0
2024 Q4 10,833 1 0 92.3
2024 Q3 17,798 0 0 0.0
2024 Q2 16,854 0 0 0.0
2024 Q1 5,709 0 0 0.0
Los trimestres con menos de 100,000 horas reportadas aparecen atenuados: muy pocas horas para una tasa estable.
No se registran muertes en esta mina.

Incidentes reportables

24 en archivo

2025 · 1 incidente

11 de junio de 2025 NC · Metal/No metálico Operador de planta de cribado en seco, Operador de caseta de cribas MANEJO DE MATERIALES
Wake Stone Corp · Sobreesfuerzo al levantar objetos

Employee was helping remove a panel from a screen when the screen panel jerked their arm down and over extending upper arm causing pain in shoulder. The incident occurred on 6/11/2025 but the employee's shoulder became worse over time and they had to receive surgery on 6/23/2025.

2019 · 1 incidente

8 de febrero de 2019 NC · Metal/No metálico Encargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campo MANEJO DE MATERIALES
Wake Stone Corp · Golpeado por... no clasificado en otra parte

The mechanic was removing the driver side platform from a haul truck. The platform was secured to the shop overhead crane. When the last bolt was removed the platform rotated and the edge of the platform cut the top of the mechanic's head.

2018 · 1 incidente

27 de febrero de 2018 NC · Metal/No metálico Almacenista, Ensacador, Paletizador/Apilador, Encargado de almacén, Empacador, Fabricante, Operador de planta de lavado MANEJO DE MATERIALES
Wake Stone Corp · Sobreesfuerzo al levantar objetos

While lifting a worn screen panel the employee strained the lower right side of back.

2017 · 2 incidentes

16 de diciembre de 2017 NC · Metal/No metálico Superintendente MANEJO DE MATERIALES
Wake Stone Corp · Sobreesfuerzo, no clasificado en otra parte

After completing work with an excavator, the employee was dismounting the parked machine. As employee stepped from the step to the ground employee felt a pain in right shoulder with which employee was holding the hand rail. The employee did not see a doctor until 02/18. Employee submitted to an MRI and results were read on 02/19/18. Employee has surgery planned for 02/22/2018.

13 de octubre de 2017 NC · Metal/No metálico Maestro mecánico, Capataz, Supervisor OTRO
Wake Stone Corp · NEC (no clasificado en otra parte)

The Pit Foreman, was discovered in the restroom unresponsive and without a pulse.

2014 · 2 incidentes

7 de julio de 2014 NC · Metal/No metálico Obrero, Herrero, Cuadrilla, Mensajero de repuestos, Peón, Recolector, Operario de mina HERRAMIENTAS MANUALES (SIN MOTOR)
Wake Stone Corp · Golpeado por... no clasificado en otra parte

Employee cutting wire mesh with shears when shears slipped and employee cut his finger on exposed wire mesh.

20 de febrero de 2014 NC · Metal/No metálico Operador de molino de martillos, Operador de molino quebrantador, Operador de molino de mandíbulas MANEJO DE MATERIALES
Wake Stone Corp · Golpeado por... no clasificado en otra parte

When turned on, the air bubble in the washdown hose caused the hose to twist in the hand of the employee and the nozzle attachment band cut the employee's right hand at the base of his thumb.

2013 · 1 incidente

5 de marzo de 2013 NC · Metal/No metálico Capataz de exterior, Cabo HERRAMIENTAS MANUALES (SIN MOTOR)
Wake Stone Corp · Atrapado en, bajo o entre un objeto en movimiento y uno fijo

Employee was tightening the main shaft nut when the tightening device bounced off of the knocker wrench and his right hand ring and little finger were pinched against the main shaft nut, requiring stitches to both, and a break on the tip of the little finger.

2010 · 3 incidentes

20 de octubre de 2010 NC · Metal/No metálico Soldador (de taller) MANEJO DE MATERIALES
Wake Stone Corp · Golpeado por objeto que cae

Welder cutting drill steel was struck on the top of his foot when the cut piece of drill steel fell on his foot.

9 de septiembre de 2010 NC · Metal/No metálico Operario de banco, Cantero MANEJO DE MATERIALES
Wake Stone Corp · Atrapado en, bajo o entre un objeto en movimiento y uno fijo

Employee was clearing a rock slab from a chute when the slab rolled over and pinched his right hand against the side of the chute, injuring his right middle and ring fingers.

17 de junio de 2010 NC · Metal/No metálico Almacenista, Ensacador, Paletizador/Apilador, Encargado de almacén, Empacador, Fabricante, Operador de planta de lavado HERRAMIENTAS MANUALES (SIN MOTOR)
Wake Stone Corp · Golpeado por... no clasificado en otra parte

While changing screen cloth injured employee's left hand was struck by a hammer being used by another employee.

2006 · 1 incidente

24 de enero de 2006 NC · Metal/No metálico Capataz de exterior, Cabo HERRAMIENTAS MANUALES (SIN MOTOR)
Wake Stone Corp · Golpeado por... no clasificado en otra parte

Supervisor was cutting a plastic tie-down which was securing an electrical shutoff line to a pit pump hose when the knife cut through the tie-down and punctured the left forearm of the employee. 3 sutures were required to close the wound.

2004 · 4 incidentes

21 de mayo de 2004 NC · Metal/No metálico Operador de camión cisterna RESBALÓN O CAÍDA DE PERSONA
Wake Stone Corp · Sobreesfuerzo, no clasificado en otra parte

Employee stepped down from the ladder of the water truck and turned his ankle, resulting in a severe sprain of the right ankle.

8 de mayo de 2004 NC · Metal/No metálico Dinamitero, Disparador, Pegador de tiros, Trabajador de explosivos, Cuadrilla de pólvora OTRO
Wake Stone Corp · NEC (no clasificado en otra parte)

Employee has involved in a physical altercation with another employee who pushed the injured employee against a wall and wrestled him to the ground injurying his left shoulder and right knee (muscle strain and bone bruise).

1 de marzo de 2004 NC · Metal/No metálico RESBALÓN O CAÍDA DE PERSONA
Wake Stone Corp · Sobreesfuerzo, no clasificado en otra parte

Employee was climbing into the cab of a Hitachi shovel when his left foot slipped and his left hand gave way, causing his entire weight to pull against his right shoulder.

21 de enero de 2004 NC · Metal/No metálico SIN VALOR REGISTRADO
Wake Stone Corp · Sin valor registrado

While preparing a cutting torch to cut bolts on a gravity take-up pulley in the plant, the employee attempted to clear a clog from the tip of the torch with his gloved hand. The torch ignited while the tip was still in contact with his hand, causing 2nd degree burns to his left hand at the base of his middle finger.

2003 · 2 incidentes

24 de septiembre de 2003 NC · Metal/No metálico SIN VALOR REGISTRADO
Wake Stone Corp · Sin valor registrado

WHILE EE WAS UNLOADING A TRACTED MANLIFT FROMHIS TRACTOR/TRAILER LOWBOY TO THE GROUND, THE SUDDEN SHIFT INT HE CENTER OF GRAVITY OF THE TRACTED MANLIFT CAUSED HIM TO FALL FROM THE MANLIFT CONT ROL BASKET TO THE GROUND. THE EE SUFFERED LACERATIONS TO HIS ARMS AND THE BACK OF HIS HEAD REQUIRING STITCHES AND A FRACTURE TO HIS LOWER BACK L-6 AREA REQUIRING THE USE OF A BACK BRACE AND B

8 de julio de 2003 NC · Metal/No metálico Encargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campo HERRAMIENTAS MANUALES (SIN MOTOR)
Wake Stone Corp · Golpeado por... no clasificado en otra parte

WHILE USING A PRY BAR TO REPOSITION EX1100 SHOVEL TRACKS FOR LOADING, THE TRACK SHIFTED AND PULLED THE PRY BAR FROM THE EMPLOYEE'S HAND AND STRUCK HIS LEG ABOVE THE RIGHT KNEE. THE SUDDEN MOVE MENT CAUSED A MUSCLE STRAIN TO HIS LOWER BACK.

2001 · 4 incidentes

6 de agosto de 2001 NC · Metal/No metálico Perforador, Operador de talud, Operador de perforadora de talud RESBALÓN O CAÍDA DE PERSONA
Wake Stone Corp · Caída desde una máquina

AN ENCLOSED CAB DRILLER STEPPED OUT OF HIS CAB TO THE ADJUSTING WORK PLATFORM TO LOOSEN THE PIPE JOINT ON HIS DRILL STEEL. WHEN HE STEPPED BACK TOWARD THE CAB CONTROLS HE STEPPED IN THE OPENIN G BETWEEN THE CAB AND THE WORK PLATFORM. HE BRUISED HIS RIGHT WRIST AFTER SLIPPED DOWN.

3 de mayo de 2001 NC · Metal/No metálico Gerente de mina, Capataz de mina, Propietario de mina RESBALÓN O CAÍDA DE PERSONA
Wake Stone Corp · Caída sobre o contra objetos

EMPLOYEE WAS STANDING IN FRONT OF 2 FT HIGH CONCRETE BLOCKS. WHEN HE TURNED TO WLAK AWAY FROM JOB, HE TRIPPED OVER THE CONCRETE BLOCK, FALLING ON HIS RIGHT ARM. HE BROKE HIS ARM ABOVE THE ELBO W, BUT RETURNED TO WORK WITH RESTRICTED DUTY.

7 de marzo de 2001 NC · Metal/No metálico Operador de retroexcavadora, Operador de excavadora sobre orugas, Operador de grúa MAQUINARIA
Wake Stone Corp · Sobreesfuerzo al levantar objetos

EMPLOYEE STRAINED HIS BACK WHILE USING A CHAINSAW AND LIFTING LOGS. THE IRRITATION OF THE BACK INJURY WAS REPORTED THE FOLLOWING DAY. THE EMPLOYEE WAS PLACED ON RESTRICTED DUTY ON 3-20-01. HE WAS NOT CERTAIN HOW OR WHEN HE HURT HIMSELF.

21 de febrero de 2001 NC · Metal/No metálico Conductor de camión TRANSPORTE MOTORIZADO
Wake Stone Corp · Golpeado contra un objeto en movimiento

A ROCK FALLING FROM THE SHOVEL BUCKET STRUCK THE BED OF THE HAUL TRUCK IN SHICH THE EE WAS SITTING WHILE BEING LOADED. THE MOVEMENT OF THE TRUCK CAUSED THE EE TO STRAIN MUSCLES IN HIS NECK.

2000 · 2 incidentes

22 de noviembre de 2000 NC · Metal/No metálico Almacenista, Ensacador, Paletizador/Apilador, Encargado de almacén, Empacador, Fabricante, Operador de planta de lavado HERRAMIENTAS MANUALES (SIN MOTOR)
Wake Stone Corp · Golpeado por... no clasificado en otra parte

WHILE USING A PRY BAR TO LINE UP A PIECE OF SCREEN CLOTH, THE EE PULLED ON THE BAR AND THE BAR SLIPPED STRIKING EE ON THE FOREHEAD WITH THE ENDOF THE BAR. 5 STITCHES WERE REQUIRED TO CLOSE TH E LACERATION

17 de agosto de 2000 NC · Metal/No metálico Almacenista, Ensacador, Paletizador/Apilador, Encargado de almacén, Empacador, Fabricante, Operador de planta de lavado RESBALÓN O CAÍDA DE PERSONA
Wake Stone Corp · Caída desde una máquina

EE LOST HIS FOOTING STEPPING DOWN FROM REAR LOADING DOOR OF A FREIGHT TRUCK. HE FELL TO THE GROUND LANDING ON HIS LEFT ELBOW AND CAUSING A CONTUSION TO HIS LEFT SHOULDER. RESTRICTED LIFTING WI TH HIS LEFT ARM.