Buscar en el registro

THICK HEAVY BRUSH RESTRICTED BODY MOTION.

EE WAS SAMPLING A BULK TRUCK WITH A SAMPLE STICK.HE CLOSED THE SAMPLE STICK AND CAUGHT HIS HAND IN THE OPENING OF THE STICK. (GRAIN THIEF)

EMPLOYEE WAS REMOVING SHAFT FROM MILL WITH A 20 LB HAMMER. THE HAMMER SLIPPED AND HIS FINGERS STRUCK THE FAN BLADE.

EE WAS ATTEMPTING TO REMOVE A HYDRALIC HOSE. WHILE PUSHING ON WRENCH HE FELT A STRAIN IN HIS SHOULDER.

EE STATES HE WAS DIGGING UNDER A FOOTER WITH A SHOVEL WHEN HIS FINGER HIT A RE-BAR STICKING OUT OF THE CONCRETE. THE RE-RAR HAD BEEN CUT & WAS SHARP. EE HAD TO HAVE STITCHES TO CLOSE THE WOUND .

EE WAS PUNCHING LUMP OF CLAY IN THE SLICER WITH A STEEL PIPE. HE MASHED HIS SMALL FINGER OF HIS RIGHT HAND AGAINST THE RIM OF THE SLICER. BOTH SLICER & SLICER BELT WERE OFF.

CONDITIONS WERE FROZEN CLAY AND FREEZING TEMPERATURE. FRACTURED FINGER WITH LACERATIONS.

TWO EMPLOYEES WERE ATTEMPTING TO REPOSITION A MINE PUMP BY PULLING IT WITH A ROPE. THE ROPE BROKE CAUSING THIS EMPLOYEE TO FALL BACKWARDS BRUISING HIS BACK. THE OTHER EMPLOYEE WAS NOT INJURED.

HE WAS ATTEMPTING TO STRAIGHTEN A FENDER ON A 920 LOADER USING A PRY BAR & A WOODEN BLOCK TO PRY WITH THE BLOCK ROLLED OVER ONTO HIS FINGER MASHING THE MIDDLE FINGER OF HIS LEFT HAND IT MASHED THE BALL (END OF FINGER) BETWEEN THE BLOCK & THE LOADER TIRE REQUIRED 3 OR 4 SUTURES

HE WAS REMOVING A HEATER TYPE HYDRAULIC HOSE WITH CLAMPS ON A 916 LOADER, UNIT #1539. HE WAS USING A UTILITY KNIFE TO TRY TO CUT IT LOOSE. THE KNIFE SLIPPED AND CUT 3RD FINGER N RIGHT HAND. REQUIRED THREE SUTURES. HE RETURNE DTO WORK AFTER GOING TO THE DOCTOR AND WORKED REMAINDER OF DAY. HE WAS ON VACATION FROM 5-26 THRU 6-5. HE RETURNED FROM VACATION ON 6-6-94.

EMPLOYEE THOUGHT HE WAS HAVING A HEART ATTACK ON 11/4/93; WENT TO DOCTOR DIAGNOSIS-PINCHED NERVE. ON 11/3/93 HE WAW PUNCHING LUMP CLAY IN TRUCK BED. AT THIS TIME HE DID NOT SAY THIS WAS WORK R ELATED. HE HAS BEEN RECEIVING SICK PAY FROM K-T CLAY UNTIL 12/13/93. HE NOW STATES IT IS WORK RELATED.

HE WAS LACING THE CONVEYOR BELT AT THE 66 MILL. HE WAS CUTTING THE BELT WITH A KNIFE. HIS LEFT HAND WAS POSITIONGED ON TOP OF THE SQUARE WHICH WAS ON TOP OF THE BELT. THE KNIFE WAS IN HIS RIGH T HAND CUTTING ALONG EDGE OF SQUARE. KNIFE SLIPPED AND CUT LEFT THUMB AND FOREFINGER. REQUIRED SUTURES.

EMPLOYEES WERE REMOVING MOTOR AND PUMP FROM FLOAT FRAME, ALL NUTS HAD BEEN REMOVED FROM THE FRAME PLATE WHICH HELD THE MOTOR AND PUMP. EMPLOYEE WAS UNDER FLOAT FRAM REMOVING DISCHARGE PIPE, WH EN THE FRAM PLATE HOLDING THE MOTOR AND PUMP FELL ON HIS FOOT.

WHILE PUNCHING A KNOT THROUGH SHREDDER WITH A STEEL BAR ARM STARTED HURTING.

EMPLS WERE WORKING ON REBUILT BAGGER. INJURED WAS TIGHTENING PIPEWORK AS HE EXERTED LOT OF PRESSURE TO TIGHTEN PIPE HIS RIBVGHT ELBOW POPPED & STARTED HURTING. HE DID NOT REPORT THIS UNTIL 4/1 2 BUT SAID ELBOW WAS HURT SINCE 3/9. IT ALSO IS SWOLLEN & APPEARANTLY HAS FLUID BUILDUP. HE WENT TO DR ON 4/24 DR DREW FLUID OFF WITH NEEDLE.

I NAME WAS CHANGING A TIRE ON DUMP TRUCK #1254 USING A 30LB SLEDGE HAMMER HE WAS TRYING TO BREAK THE CLIP LOOSE WITH THE SLEDGE HAMMER AND ACCIDENTALLY HIT HIS MIDDLE FINGER ON L HAND WITH THE SLEDGE HAMMER MASHING AND LACERATING HIS FINGER LACERATION REQUIRED FOUR SUTURES

HE WAS PULLING ON THE DUMP TRUCK TAILGATE TRYING TO OPEN IT. THE HANDLE WAS STUCK. HE USED A BAR TO HELP FREE IT. HE HURT HIS RIGHT SIDE WHILE PULLING ON THE BAR AND HANDLE. HE ONLY LOST ONE D AY THE DR RELEASED HIM TO RETURN TO WORK ON 2-1-88 BUT HE WAS LAID OFF ALL WEEK DUE TO BAD WEATHER. HE CAME INTO THE OFFICE ON 2 -8-88 TOLD ME ABOUT THE ACCIDENT AND GAVE ME THE DETAILS FOR T

EMPLOYEE WAS AS8ISTING IN STALLATION OF NEW RIPPER THEETH WHICH WOULD NOT FIT SO THEY WERE RE-INSTALLING OLD TOOTH. HE STRUCK TOOTH WITH SLEDGE TO MAKE IT FIT, AND A SLIVER OF STEEL APPROX HA LF INCH LONG BO5E OFF AND HIT HIM ON RIGHT CHEEK.

HE WAS GREASING3HIS SHOVEL AND RAISED UP AND HIT HIS HEAD.