Buscar en el registro

EE WAS OPERATING AN EXCAVATOR AND ATTEMPTING TO BREAK A HUGH BOULDER. HE HAD THE FRONT OF THE TRACKS ELEVATED OFF THE GROUND AND THEN WHEN THE BOULDER BROKE THE MACHINE CAME DOWN HARD TO THE G ROUND. THE SEAT OF.

AFTER AN ANGLE IRON HAD BEEN CUT, EMPLOYEE REACHED UP WITH HISLEFT HAND TO GRAB THE PIECE OF ANGLE IRON AND AT THE SAME TIME, THE IRON SHIFTED AND HIS LEFT THUMB CONTACTED THE SAW BLADE, LACER ATING HIS LEFT THUMB.

WHILE THE EE WAS GRINDING A PIECE OF METAL, SOME OF IT CAUGHT INTO HIS EYE.

EE WAS USING A GRINDER TO CUT OUT OLD LACERS ON A CONVEYOR BELT, WHEN A SMALL PIECE OF METAL FLEW INTO HIS LEFT EYE DESPITE THE USE OF SAFETY GLASSES.

WHILE GRINDING A PIECE OF METAL, THE EMPLOYEE GOT A PIECE OF STEEL IN HIS EYE.

TROUBLE SHOUTING, PFAFF SAMPLE SYSTEM. ACUATOR RAISED PINCHING LEFT INDEX FINGER. SUTURES REQUIRED.

A RED HOT 2" WELDING ROD DROPPED FROM ABOVE AND LANDED ON HIS RIGHT SHOULDER AND BACK OF NECK.

EMPLOYEE WAS TIGHTENING NUTS ON A ROLLER MILL TIRE WITH HYDRAULIC TORQUE WRENCH WHEN THE WRENCH SLIPPED OFF AND HIT HIS LEFT SIDE OF RIGHT KNEE CAP.

EE WAS TRYING TO START A CHAIN SAW & SPRAINED HIS NECK.

WHILE BACKING UP A DOZER EE RAN OVER A BIG ROCK. CAUSING PAIN IN MY NECK.

ADJUSTING DRILL STEEL TO GO INTO THE CHUCK. THE STEEL WHIPPED BACK AND PINCHED HIS LEFT THUMB BETWEEN IT AND ANOTHER PIECE OF IRON.

CUTTING A PIECE OF STEEL & HOT SLAG WENT INTO HIS EAR.

INJURED WAS WORKING AT THE CRUSHER A ROCK, BOUNCED UP AND HIT THE EMPLOYEES SAFETY GLASSES, WHICH GAVE HIM A CUT ABOVE HIS RIGHT EYE.

A CRANE WAS POSOTIONING THE TOGGLE PLATE BEHIND THE JAW. EE WAS WAITING TO POSITION THE PLATE. THE METAL LIFTING EYE WELDED ONTO THE PLATE BROKE. THE PLATE FELL ONTO THE EE CRUSHING HIS RIGHT HAND SEVERAL STICHES, NO BROKEN BONES AND BRUISING UPPER LEFT LEG. HIS RIGHT HAND RECEIVED A CAST AND A SLING.

EE WAS WELDING A GUARD UNDER A BELT WHEN A PIECEOF WELDING SLAG WENT IN HIS LEFT EAR.

EE WAS REMOVING GROUT FROM UNDER PRIMARY CRUSHER WITH JACKHAMMER. POSITION IN WHICH EE HAD TO WORK WAS INCOVENIENT HIS BODY HAD TO WORK IN A STRAINED POSITION. THE WEIGHT OF THE JACKHAMMER IN ADDITION TO THE STRAINED POSITION IN WHICH HE WAS WORKING CAUSED EE TO INJURE HIS RIGHT SHOULDER EE BEGAN LOSING TIME FOR THIS INJURY ON 5-19-93.

EMPLOYEE WAS GRINDING ABOUT A DOZEN EYE LIFT PLATES ON THE BENCH. EVERY TIME HE WOULD STOP TO CHANGE PLATES AND RECLAMP, HE WOULD START THE GRINDER WHICH WOULD THROW THE CIRCUIT BREAKER. EMPLO YEE KEPT THE GRINDER RUNNING AND SET IT ON ITS BACKSIDE WHILE RE-CLAMPING. AFTER ABOUT 10 PIECES OF PLAT, THE GRINDER SLIPPED AND CAUGHT LEFT ARM.

USING HAND GRINDER, GRINDING PIECE OF METAL ON SCRUBBER WHEN A PIECE OF RUST FLEW INTO EYE BETWEEN FACE AND SAFETY GLASSES.

EMPLOYEE WAS WORKING AT THE RAW MILL DOING REPAIR AND MAINTENANCE WORK. EMPLOYEE BUMPED KNEE ON STEEL PLATE AS HE WAS WELDING BEHIND TIRE IN RAW MILL.

WELDING W STICK IT CASE STACK HE PULLED AWAY ROD W STINGER PUNCTURED HIS R FOREARM

EMPLOYEE WAS USING AIR GUN WHILE DOING REPAIR WORK. DUST BLEW INTO EYE.

M\NO MEICAL TREATMENT RENDERED UNTIL 01-24-92.THE EMPLOYEE DID NOT THINK THERE WAS ANYTHING IN HIS EYE,SO IT WAS NOT REPORTABLE UNTIL THIS TIME.INJURY DUE TO FLYING PARTICLE WHILE GRINDING PIE CE OF METAL.BOTH SAFETY GLASSES AND FACESHIELD WERE WORN.

EMPLOYEE WAS FITTING PIPE, USING A 4" GRINDER WHEN HIS GLOVE GOT CAUGHT IN THE GRINDING WHEEL AND HIS HAND WAS CUT.

EE WAS REMOVING PAIN FROM CUTTING EDGES WITH ELECTRIC GRINATER WHEN WHEEL EDGE CONTACTED ANOTHER EDGES THE GRINDER KICKED BACK AND PINCHED LEFT HAND AGAINST SHARP EDGE RESULTING IN CUT AND BRU ISED INDEX FINGER.

EMPLOYEE WAS RATTLING UP SOME PLATFORM IRON WITH A 1" GUN. PLATFORM WAS APPROX. 4' HIGH. EMPLOYEE FELT PAIN IN HIS BACK AFTER PERFORMING TASK.

EMPLOYEE STATED THAT HE WAS GRINDING A WELD ON STRUCTURAL STEEL WHEN SOMETHING GOT IN HIS EYE.NOT REPORTED INITIALLY AS WORK RELATED.SUBSEQUENT INVESTIGATION INDICATES THIS INCIDENT MET REPORT ING CRITERIA.

EMPLOYEE WAS HELPING TO FINISH THE DISMANTLE OF 4100 TOWER.AS THE LAST SECTION OF THE BOOM WAS DISCONNECTED,THE CRIBBING SHIFTED CAUSING THE CAP TO ROLL,THROWING EMPLOYEE OFF BALANCE.

CHAIN BLOCK WAS SET IN PLACE BY THE GRIZZLY, HE WAS TAKING THE CHAIN LOOSE, CHAIN CAUGHT ON LOOP ON ECOLOGY BLOCK, PULLED BLOCK OVER ON THE HIS LEGS PINNING HIM TO THE GROUND.

TAKING BOLT OFF WORNOUT CUTTING EDGE. STUCK HIS HAND ON HEAD OF THE BOLT TO HOLD IT AND PULL THE TRIGGER ON THE IMPACT GUN, CAUSING HEAD OF BOLT TO SPIN AND CUT HIS HAND.

EE CAME TO WORK WITH IRRITATED EYE. FOREIGN OBJECT GOT INTO EYE THE DAY BEFORE EE THOUGHT IT WAS A FLASH BURN. EE HAD BEEN GRINDING.

EMPLOYEE HAD COMPLTED A SMOOTHING OPERATION WITH A HAND HELD GRINDER. HIS TARK WAS TO REMOVE THE EXCESS SLAG FROM A WELD IN THE FABRICATION OF A CONVEYOR SYSTEMS. IN RESTING HIS TOOL (9" GRIND ER) HE SIMPLY LET THE TOOL HIT HIS LEFT KNEE RESULTING IN A LACERATION OF WHICH HE RECEIVED STITCHES TO CLOSE THE WOUND.

WHILE THE EMPLOYEE WAS OPERATING A DOZER HE HAD A FOREIGN BODY IMBEDDED IN LEFT EYE.

WELDING OVERHEAD ANS WELDING SPARKS ENTERED EAR.

DESLAGGING WELDED SEAM & SMALL SLAG PARTICLE ENTER EYE. SLAG WASHED OUT OF EYE BUT RUST RING DEVELOPED & EMPL HAD TO GO BACK TO DOC. ON 8/30 & GET RUST RING REMOVED. LOST WORK 8/31 WILL BE BAC K AFTER LABOR DAY WEEKEND.

THE EMPLOYEE WAS OPERATING A DRAGLINE STRIPPING OVERBURDEN WHEN THE DRAGLINE STARTED TOMOVE DOWN THE EMBANKMENT. THE EMPLOYEE COULD NOT STOP THE DRAGLINE SO HE JUMPED OFF THE MACHINE BEFORE IT WENT OVER THE DROP OFF.

WHILE CHISELING ON A BOLT WITH AN AIR CHISEL A PIECE OF METAL HIT HIM ON THE FOREHEAD, CUTTING HIS FOREHEAD REQUIRING STITCHES. EMPLOYEE WAS WEARING SAFETY GLASSES.

EMPLOYEE WAS GRINDING A DRAGLINE HOIST BRAKE DRUM AND DUST GOT AROUND HIS SAFETY GLASSES AND CAUSED EYE IRRITATION. OCCUPATIONAL HEALTH ASSOCIATES WASHED OUT HIS EYES AND GAVE HIM A PRESCIPTIO N FOR MEDICATION. RETURN TO DOCTOR FOR CHECKUP ON 11-20-89.

EMPLOYEE WAS USING A GRINDING WHICH HIT HIS KNEE AND REQURIED STITCHES.

EMPLOYEE WAS USING A DRILL PRESS TO DRILL A HOLE IN A DRIVELINE YOKE FOR A HYDRAULIC PUMP ON A TRUCK DRILL BIT HUNG UP & SPUN THE YOKE HE WAS HOLDING IT WITH HIS BARE HANDS & CUT HIS FINGER O N THE SHARP INNER RING OF THE YOKE

INJURED WAS AIR LANCING THE PLUGGED 4TH STAGE PRE HEAT KILN FEED PIPE HE WAS WEARING ALL REQUIRED NEXT PROTECTIVE CLOTHING HOOD JACKET AND GLOVES HE PULLED THE AIR LANCE FROM THE PORT HOT KILN FEED STRUCK HIS HOOD AND SPLASHED DOWN SLEEVE INTO THE TOP OF HIS GLOVE CAUSING 3RD DEGREE BURN TO BACK OF L HAND

LAYING ON BACK DRILLING HOLE IN TRUCK CAB WITH DRILL, METAL SHAVING FELL IN LEFT EYE.

EMPLOYEE WAS USING A 12000 RPM GRINDING WHEEL DESIGNED FOR THE COMPANY 10000 RPM ELECTRIC HAND GRINDER IN HIS OWN 20000 RPM AIR POWER HAND GRINDER. THE WHEEL BROKE AND PUNCTURED HIS LEFT GROIN .

EMPL WAS WEARING A FULL FACE SHIELD WHILE GRINDING A PIECE OF METAL AND A PIECE OF METAL AND AMEDAL SLIVER BOUNCED BEHIND THE SHIELD AND LODGED IN HIS R EYE

THE EMPLOYEE WAS USING APORTABEL STEAM CLEANER TO WASH DOWN THE COAL MILL GEAR BOX WHEN HE LOST HIS BALANCE AND ENGAGED THE WAND.THE WAND WHIPPED ACROSS THE EMPLOYEE'S FOOT WITH HIGH PRESSURE WATER.

DRILLING OUT BOLT WHEN PIECE OF METAL FLEW INTO R EYE

WHILE RUNNING G9INDER A STEEL CHIP FLEW INTO EYEBURNT THE EYE.

THE EMPLOYEE WA8 USING A JACKHAMMER IN THE KILN COOLER DUCT WHEN THE JACKHAMMER STRUCK THE INSIDE OF THE EMPLOYEE'S LEFT FOOT.

EMPLOYEE WAS US3NG A 10IN DISC GRINDER TO SMOOTH OFF BURS ON A STEEL PIN FOR THE ROLLER MILL HE WAS GRINDING IN A CLOCKWISE MOTION & THE 10IN DISC STRUCK HIS LEFT WRIST

EMP WAS USING E4ERY CLOTH TO POLICH A SHAFT THAT WAS TURNING ON A LATHE. THE EMERY CLOTH SLIPPED AND CUT THE EMPLOYEES RIGHT PALM AND MIDDLE FINGER REQUIRING STITCHES

THE EMPLOYEE ST5TES HE WAS BREAKING OVERSIZED ROCK WITH A DROPBALL WHEN THE BOOM CABLE BROKE APPROXIMATELY 14 INCHES FROM DEAD END. THE BOOM FELL APPROXIMATELY 60 FEET TO ROCK PILE WITH SHEAVE END BENDING OVE9 ROCK.