Buscar en el registro

Bobcat operator struck a fixed object. Reported to company on 5/29 when occurred on 5/5.

Miner was using "walk behind" skid steer to clean spillage off the ground under the roll crusher return conveyor. The employee trammed the machine into the belt structure causing their left hand to be caught between the top of the machine and the metal belt frame.

Employee suffered minor sprain to neck while operating FEL

Miner was attempting to re-position the forks on a bobcat. The fork bounced and when it did his right hand got pinched between the fork and the support behind the fork causing a laceration which required stitches at the local medical facility.

Employee was backing up on hyster. He had his foot on the step of the hyster and caught his heel on a super sack twisting his heel and ankle resulting in strain/brusing to the ankle and foot.

EE was dumping over a stockpile with a Cat haul truck when the stockpile failed which caused the truck to overturn. MSHA was immediately notified due to serious potential of accident.

Employee was operating bobcat on unlevel ground which turned over on its side. The employee was wearing a seatbelt, but his elbow hit a piece of metal causing a cut. The employee was taken to a local walk-in clinic where he received stitches and medication. The doctor released the employee to return to work the same day for regular duty with no time off due to this injury.

On 12/11/2007 a haul truck leaving the mine travling to the mill was involved in a one vehicle accident. The driver of the haul truck swerved to miss a dog in the road and over corrected causing the truck to leave the highway and come to rest in a field. The driver suffered a broken foot and the truck recieved damage to the front hood and cab area.

Employee came around a curve in a loader, miss-judged distance and struck pillar.

EE dumped at the crusher and did not lower the bed on the haul truck. The bed impacted the brow at the second level entrance. Jamming the cab of the truck into the back.

Employee notice that his eyes were irrated after being around diesel smoke. He was take to the doctor and given prescription eyedrops. The doctor was unsure of the cause of the irritation.

A LOAD BEING LIFTED WITH NYLON KEVLAR FIBER FLAT SLING OVER THE EDGE OF THE FORK TIRES. AS THE TINES WERE SLIGHTLY POINTED UPWARD WHILE LIFTING THE LOAD, THE WEIGHT OF THE SAID LOAD CAUSED SLI NG TO SLIDE DOWN TINES & CUT AND BURNED THE FIBER, CUTTING THE SLING INTO. THE LOAD THEN FELL ONTO THE RT LEG OF THE INJURED EMPLOYEE.

EE HAD NOTICED A SMALL LEAK ON THE MIDDLE FLAT SCREEN DISCHARGE BELT. WHEN EE INSPECTED THE BELT A 24-30" LONG STRIP OF THE BELT THAT WAS TORN LOSS GRABBED HIS RIGHT HAND AND DREW HIM INTO THE HEAD WING PULLEY.

NO DAMAGE OR IMPAIRMENT. EE WAS CLEANING THE RAILROAD TRACKS OF DIRT AND MATERIAL WITH THE BOBCAT LOADER IN THE LOADING AREA. THE LOADER BUCKET LODGE AGAINST A BROEN RAIL AND THE EE HIT AGAINS T THE LOADER SAFETY BAR.

THE EMPLOYEE WAS BACKING UP A HAUL TRUCK TO GET LOADED, WHEN THE DOOR THAT WAS OPEN FOR VENTILATION CLOSED PINCHING FINGERS OF LEFT HAND BETWEEN DOOR AND FRAME.

EMPLOYEE WAS LOADING A TRUCK USING A BELT TYPE CONVEYOR. HE WAS LOCATED AT A PLATFORM AT THE HEAD PULLEY. MATERIAL MAY HAVE SLOUGHED OFF AT THE BIN FEEDER ALONG WITH DUST ON THE HEAD PULLEY C AUSING THE CONVEYOR TO SLIP SOME ON THE HEAD PULLEY. THE EMPLOYEE USED A 1 GAL. CAN OF WATER TO WET THE BELT FOR MORE TRACTION. BELT LURCHED & CAUGHT EMPLOYEE'S WATCH & STRIPPED IT FROM HAND.

EMPLOYEE WAS REPLACING A TIRE ON A UTILITY BUCKET LOADER. A FORKLIFT WAS USED TO RAISE THE BUCKET LOADER. A HELPER WAS OPERATING THE FORKLIFT AND WAS ASKED TO LOWER THE LOADER ABOUT 8" TO MEET THE NEW TIRE. THE EMPLOYEE HAD THE TIRE UNDER THE FENDER & HIS LEFT HAND RING FINGER WAS MASHEDBETWEEN THE FENDER & THE TIRE HE WAS HOLDING. 4 STITCHES, WRAP AND RETURNED TO WORK SAME DAY.

EE WAS WELDING ON LOWER SECTION OF ELEVATOR. DUE TO ELEVATOR BEING OUT OF SERVICE FOR REPAIRS, THE PLANT OPERATOR REDIRECTED THE MATERIAL FLOW TO BY-PASS THIS ELEVATOR BY MOVING AGATE. MOVE MENT OF THIS GATE CAUSED SOME MATERIAL TO FALL LANDING ON PEOPLE WORKING BELOW CAUSING EE TO GET SOME AMTERIAL IN HIS EYE.

METAL WAS TIED DOWN WITH CHAINS WHILE BEING LIFTED & TRANSPORTED BY FORKLIFT. ONE CHAIN BROKE CAUSING METAL TO SLIDE TO ONE SIDE AS IT TILTED STRIKING EE ON THE LEFT LEG & LEFT FOOT.

EMPLOYEE WAS BACKDRAGGING A HAULAGE ROAD. ANOTHER WAS OPERATING A HAUL TRUCK BACKING INTO POSITION TO BE LOADED. EE, WHILE BACKDRAGGING, HAD STOPPED THE LOADER PARTIALLY BLOCKING THE HAULAGE R OAD. TRUCK BACKING INTO THE AREA DID NOT SEE THELOADER AND STRUCK SAME ON LEFT REAR. THE IMPACT CAUSED THE INJURED TO STRIKE THE CLOSED DOOR OF THE LOADER.

THE EMPLOYEE WAS EXITING ONTO A DOWN GRADE AND WENT TO SHIFT DOWN AND IT APPEARS HE MAY HAVE PUT IT INTO REVERSE AND THE ENGINE STALLED THE EMPLOYEE PANICKED AND JUMPED FROM THE 966 CAT. LOADE R AND UPON STICKING THE GROUND HE BROKE HIS RIGHT UPPER LEG. THE EMPLOYEE WAS NOT WEARING SEATBELT & IT APPEARS HE NEVER ATTEMPTED TO APPLY THE BRAKES OR TO SLOW OR STOP THE LOADER, HE JUMPED

TEAM MEMBER WAS REACHING TO REMOVE EYE BOLT FROM CABLE EYE. AS HE GRASPED EYE BOLT HIS & CO-WORKERS MOVEMENT CAUSED MAN LIFT BASKET TO SHIFT JUST ENOUGH TO STRIKE LOWER PORTION OF EYE BOLT PI NCHING RIGHT INDEX FINGER BETWEEN BOLT HEAD & CABLE EYE. CUT TO INDEX FINGERREQUIRED FIVE STITCHES.

TEAM MEMBER WAS ATTEMPTING TO DETERMINE IF BELT TENSION WAS CAUSE OF SCREW NOT TURNING, AND HAD GIVEN VERBAL INSTRUCTION TO OTHER TEAM MEMBER TO START/STOP SCREW, WHILE OBSERVING BELTS, WHEN H E GRABBED BELTS TO CHECK TENSION. DRIVE RESTARTED PINCHING RIGHT HAND BETWEEN BELTS AND DRIVE SHIEVE.

THE ROADWAY HAD JUST BEEN WET DOWN. THE HAULAGE TRUCK HE WAS IN CAME DOWN A GRADE AND WENT INTO A CURVE AND OUT OF CONTROL STRIKING A PILLOW HEAD ON. THE EMPLOYEE'S LEG RIGHT ONE HIT THE SHIFT BOX AND BRUISED IT JUST BELOW THE KNEE.

EE STEPPED ON TO MATERIAL ON TOP OF A FEEDER THE MATERIAL HAD BRIDGED OVER AND WHEN HE STEPPED ON IT THE MATERIAL GAVE WAY AND HIS RIGHT LEG WAS PULLED INTO THE FEEDER CHUTE. HIS LEGS HIPS AND ARMS WERE BRUISED BY THE MATERIAL.

MUCH RAIN HAD OCCURRED DURING PAST 2 WEEKS. GROUND AND AREA AROUND QUARRY PROBABLY HAD SOFTENED AND BECOME UNSTABLE. TRUCK BACKED INTO THE AREA OF THE QUARRY WALL WITH OVERBURDEN AND APPEARED TO MAYBE OVER-TRAVEL. SOFT CONDITION AND OVER-TRAVEL APPEAR TO BE THE CONDITIONS.

CLEANING OUT DUCT WORK TO LOADOUT WENT TO LOWER BUCKET IT BOUNCE AND PINNED L HAND BETWEEN THE CONTROL LEVER AND DUCT WORK

EMPLOYEE WAS OPERATING THE FORKLIFT.INJURED GRABBED THE MAST ON THE FORKLIFT TO PULL HIMSELF UP TO GRAB A BULK BAG STRAP.FORKLIFT OPERATOR SIDE SHIFTED THE FORKS AND SCRAPED INJUREDS HAND.

EMPLOYEE CAUGHT BETWEEN BELT AND TAIL ROLLER.

EMPL LOADING TRUCK WHEN TAILGATE OF TRUCK CLOSED ON FINGER WHILE CLEANING AROUND TAILGATE.MASHED & BROKE TIP OF 3RD FINGER ON LEFT HAND.

DOWN LEVER ON BOOM HIT WHILE BUCKET OF LIFT WAS ON LEDGE BOOM PULLING DOWN UNTIL PRESSURE GREAT ENOUGH TO FORCE BUCKET OVER LEDGE PUSHING TRUCK AWAY FORM FACE BUCKET HIT FLOOR BUCKET TURNED UP WITH EMP INN BUCKET.

EE WAS WALKING BY A TRUCK LOADED WITH QUARRIED STONE WHEN A ROCK FELL FROM A PALLET AND STRUCK HIM ON HIS LOWER BACK AND CUTTING HIS UPPER HIP. THE CUT REQUIRED STICHES.

EMPL CUT FINGERS ON PULLEY WHEN CHECKING TENSION ON BELT

EMPLOYEE WAS FILLING THE BUCKET OF HIS LOADER ON 082287 WHEN HE HIT A STEPUP IN FLOOR & INJURED HIS NECK DOC.RELEASED HIM TO RETURN TO WORK ON 091487 WITH NO LI,ITS ON HIS ACTIVITIES EMPLOYEE COMPLAIN OF CONTINUED PAIN & LOSTG TIME FOR ADDITIONAL TEST TO FIND SOURCE OF PAIN STARTED LOSING TIME AGAIN ON 042588

EMPLOYEE WAS LOADING A TRUCK WITH A FRONT-END LOADER, HE HIT A STEP-UP IN THE FLOOR WHILE FILLING HIS BUCKET AND STRUCK HIS ELBOW ON THE DOOR OF THE LOADER.

EMP WAS LOADING3A TRUCK WITH A LOADER. HE WAS FILLING HIS BUCKET WHEN HE RAN INTO A STEPUP IN THE FLOOR WITH HIS BUCKET. THE FLOADER STOPPED SUDDENLY AND THE EMPLOYEE INJURED HIS NECK