Buscar en el registro

He was cutting a piece of truss of stacking conveyor when final cut was made conveyor broke loose & moved. EE was standing on 3rd rung of ladder conveyor did not contact ee or ladder but he jumped off ladder & fell to ground landing on left arm.

Using cutting torch to remove snubber pulley from conveyor frame. When removing, snubber fell and pinched left thumb. He was taken to hospital and surgery done.

He was removing a water valve from a pipe and bumped his head on pipe. He received a cut to scalp in back of head. Received staples and tetanus shot.

While pulling a lid into place, finger was pinched between lid and steel beam.

Using cut off wheel on grinder cutting piece of steel.

Man was standing on step ladder welding. He stepped off side of ladder and fell hurting his foot.

Employee had brought a deer skull to work and was cutting off the hide and the knife slipped and cut his hand - required stitches.

EE believed airlock was plugged. He did not de-energize machine. Did not use lock out procudure. EE remved a plate from the chute and stuck his hand into the discharge chute. His hand contracted the energized airlock and finger (3) were cut off.

EE was sliding skirt board plates into hopper. He twisted as he attempted to push the skirt board to a co-worker on other side of opening.

Hammering on a punch, a piece broke off and punctured left arm.

Climbing down ladder on Cat 771D (Eqp #313), slipped and banged up knee on the steel ladder.

After working on a shot, arms and legs went numb; took a break, heat exhaustion. **New diagnosis of Mono**

When greasing loader, EE caught his left foot in the bucket brace.

EE MISSED STEP WHEN EXITING YARD TRUCK. HIS LEFT FOOT LANDED ON A SMALL PIECE OF CONCRETE WITH ALL HIS WEIGHT. BROKE HIS FOOT.

Lifting a bearing housing when he strained his neck.

WHILE EXITING SKID LOADER, SLIPPED ON ICE AND FELL, HIT HEAD ON GROUND. WAS REMOVING SNOW ON ROAD COMING INTO THE QUARRY.

GRINDING ON THE EDGE OF STEEL SHEET - GRINDER WHEEL CAUGHT ON A STEEL CLAMP - KICKED BACK STRIKING LEFT KNEE - PRODUCED A CUT THAT REQUIRED STITCHES.

PULLING ON A HANDLE TO TIGHTEN THE CRUSHER. SLIPPED AND FELL ON CAT WALK. WENT TO HOSPITAL E.R FOR A SHOULDER SPLIT/ HARNESS AND A POSSIBLE ROTATOR CUP TEAR.

EMPLOYEE WAS REPAIRING THE CONVEYOR BASE. WHILE LIFTING/MOVING AN 8' LONG I-BEAM HE STRAINED HIS SHOULDER & WRIST. HE MISSED ONE DAY OF WORK & HAS ARM IN A SLING.

HAMMERING A PIN OUT OF A LOADER WHEN A PIECE OF THE PIN CHIPPED OFF AND LANDED IN LEFT ARM, REQUIRING STITCHES.

EMPLOYEE WAS CLEANING MUD FROM LOADER BUCKET, WHEN A CHUNK OF MUD ROLLED OUT OF BUCKET AND HIT HIS LEFT KNEE. POSSIBLE STRAIN OR FRACTURE.

WHILE BREAKING INTO FROZEN STONE PILE, SUFFERED NECK PAIN, WHEN HE JERKED BACK & FORWARD. SAID HE FELT SOMETHING SNAP IN NECK.

STUMBLED OVER WELDING CABLE & HIT ELBOW ON EDGE OF CHUTE. WENT TO DOCTOR 2/18 AND GIVEN PILLS ONLY. WENT TO DOCTOR 2/25 AND ELBOW WAS LANCED TO DRAIN OFF FLUID.

EE WAS DOING ROUTINE MAINTENANCE IN THE MILL. WHILE CARRYING A HEATER UP THE STAIRS HE FELT AN INCREASE PAIN IN HIS RIGHT SHOULDER, WHICH HE HAD SORENESS ALREADY FROM LIFTING STEEL TO REPAIR A CONVEYOR 2-3 WEEKS EARLIER.

WELDING AND TIP OF WELDING ROD BURNED THRU GLOVE AND INTO FINGER.

OPERATING AIR HAMMER TO BREAK LOOSE LIME DEPOSIT ON MILL CHUTE - WRIST HAS HURT SINCE.

CUTTING A PIECE OF CONVEYOR BELT - KNIFE SLIPPED OFF BELT AND CUT HIS HAND.

OPENING HATCHES ON RAILCAR, HE STEPPED ACROSS OPENING & TRIPPED, CATCHING HIMSELF WITH HIS LEFT ARM CAUSING A STRAIN TO HIS ARM.

DOING MAINTENANCE WORK ON MOTOR BASE - SLIPPED OFF MOTOR BASE & SPRAINED WRIST.

WHILE INSTALLING TAIL PULLEY, THE PULLEY SLID SIDEWAYS ON OPPSITE SIDE. HE REACHED TO STOP PULLEY AND IT SLID OFF OF HIS SIDE CAUSING IT TO SMASH HIS FINGER BETWEENT HE PULLEY AND FRAME OF THE CONVEYOR HE REQUIRED STITCHES.

WORKING AROUND CONVEYOR - TRIPPED & FELL - WHEN GETTING UP ROCK FELL FROM CONVEYOR STRIKING FOREHEAD.

SLIPPED AND FELL ON ICE, HIT HHER HEAD.

GETTING MATERIAL FROM BIN. HIT SIDE OF BIN WITH A SLEDGE HAMMER, HANDLE CAUGHT ON AN AIR LINE CAUSING LEFT HAND TO SLIDE OFF THE HANDLE AND SLAM FINGER INTO AIR LINE.

INJURED WAS TURNING OFF ELECTRIC SWITCH LOCATED IN SIDE BUILDING AT THE MILL THE SWITCH WHICH RUNS THE PLANT EXPLODED FIRE FLEW OUT AND BURNED THE INJURED

INJURED WAS STANDING AT WORK STATION IN LAB OFFICE THOUGHT CHAIR WAS CLOSE. WHEN HE STARTED TO SIT CHAIR WAS AT ANOTHER DESK FELL ON REAR & BACK.

IN PREPARATION FOR WELDING INJUREKD WAS CHIPPING SLAG OFF PIECE OF STEEL WITH HAMMER & CHISEL PIECE OF STEEL FROM HAMMER CHISEL OR WORK PIECE FLEW OFF STRIKING LEFT THUMB

INJURED WAS HELPING ON MAINTENANCE OF BUCKET ON LOADER ANOTHER EMPL WAS WELDING ON BUCKET OF LOADER INJURED WAS STADING NEAR BY NOT LOOKING AT WELDING BUT GLARE CAUSED BURN TO SIDE OF R EYE

INJURED WAS ON HOOD OF TRUCK FIXING VENT IN FRON OF WINDSHIELD TO KEEP WATER FROM RUNNING INSIDE OF TRUCK WENT TO GET UP AND HAND SLIPPED BACK UNDER HER ALSO PULLED TENDON IN BACK

WHILE INSTALLING NEW WASHER SPRAY BAR ON SHAKER SCREEN, INJURED WAS PUSHING SPRAY BAR THRU OPENING IN SIDE OF SCREEN FRAME, CUT FINGER ON EDGE OF PIPE.

INJURED WA S STEPPING DDOWN FROM SHAKER SCREEN IN JMILL, FOOT SLIPED AND SPRAINED RIGHT FOOT.

INJ. WA HELPING ASSEMBLE A CONVEYOR FRAME. ONE END OF CONVEYOR WAS HELD UP WITH FRONT END LOADER. INJ. WAS LAYING UNDER CONVEYOR SECTION, WELDING. WELD BROKE IN THE MIDDLE OF THE CONVEYOR AND THE CONVEYOR FEL 6" TO 12", FALLING ON INJURED.

A ROCK WAS STUC5 BETWEEN DUAL REAR WHEEL OF PARKED DUMP TRUCK. IN TRYING TO REMOVE THE ROCK, THE INJURED WRENCHED HIS BACK.

INJ WAS POKING 5 WELDING ROD THROUGH THE GUARD CONVEYOR TO GET GREASE OFF OF TAIL PULLEY. ROD GOT FAST ON PULLEY FLIPPED AND CUT FINGER OF INJURED

EMPLOYEE WAS HE5PING PUT SPLICE IN CONVEYOR BELT CLIMBING OVER BELT TO GET TO FAR SIDE TO INSTALL BELT SPLICES HE SLIPPED AND CAUGHT RT THUMB IN CHAIN ON HOIST BELT WAS NOT RUNNING

INJURED WAS GRE5SING MILL STEPPED BACKWARD AWAY FROM CAGE MILL TRIPPED AND FELL OUT DOOR LANDED AND FELL ON EDGE OF STONE PILE AND TWISTED RT KNEE

WELDING ON CRUS2ER TOGGLE PLATE IN SHOP.WHEN HE RAISED WELDING HELMET SLAG POPPED HITTING RIGHT EYE.

EE WAS STARTING3PLANT FOR DAYS RUN. HE PUSHED STAT BUTTON, POWER LINE BLEW OVER HIS HEAD. HE WAS EITHER KNOCKED OF JUMPED BACKWARD TO GORUND. HE WAS SHAKEY BUT COHERENT & SEEMED ALRIGHT. 20 MI NUTES LATER GOT3SICK & VOMITED. HE WAS TAKEN TO H OSPITAL FOR CHECKUP.

EMPL PICKING UP3AND HANDING BAGS OF DYNAMITE OT ANOTHER EMPL AND WHEN HE PICKED UP A BAG FELT PULL IN GROIN.

INJURED WAS CHE7KING MILL,WAS COMING DOWN LADDER,TOOLS IN HAND-HAND SLIPPED AND HE FELL BACKWARD AND HIT A SCREW OR AUGER ON HIS BACK.

INJURED EMPLOYE9 HAD RESTARTED STALLED CONVEYOR AND WAS WALKING AROUND END OF BIN TO CHECK BELT WHEN HE STEPPED ON LOOSE STONE AND TWISTED ANKLE.