Buscar en el registro

Employee was working on the tail section of a conveyor. After completing work, he started to dismount the conveyor and slipped. He caught himself with his left arm and began complaining about pain in his shoulder. He was taken to emergency care that day. A week later he began complaining about pain in his left elbow and arm.

The employee was working on installing a pipe for a new piece of equipment with another employee. The pipe broke loose and forced the employee off of the ladder from which he was working. The employee came off the ladder in a back and to the left motion and landed (stepped) on a 1" x 6" piece of pipe laying on the ground.

EE was using excavator to assist coworker with changing out a bearing on the head box of the overland conveyor. Excavator positioned in an awkward position: no access to the step to mount/dismount. EE attempted to dismount in a safe manner, but caught his right foot in the tracks & twisted his right knee as he stepped to ground (did not fall - twisted out of his shoe).

After employee had bolted shaft on belt winder, he backed away from the equipment and tripped over the truing shaft located close to the ground. He finished off his shift for the day, but complained about pains the following day. The doctor informed that he injured his lower lumbar region and needed to stay away from work for a period of at least three days.

Standard Threshold Shift on Hearing Test, noted at "reportable Hearing Loss" as required by Part 50 for reporting occupational injuries and illnesses. Original submission amended to include name, social and occupation per call to Company on 4/1/04.

Standard Threshod Shift on Hearing test, noted at "reportable hearing loss" as required by Part 50 for reporting occupational injuries and illnesses. Amended original edoc to include name, social and job title per call to Company on 4/1/04.

THE EE WAS SITTING ON THE BACKHOE OPERATING THE BOOM. HE DEPRESSED THE SEAT INT HE RECOMDENDED MANER IN ORDER TO SWIVEL THE SEAT TO THE FORWARD/DRIVE POSITION. AT THIS POINT, HE EXPERIENCED SE VERE PAIN IN HIS LWOER BACK AND LEGS.

STRUCK IN HEAD WITH A ROCK WHILE CHECKING A HYDRALIC OIL LEAK ABOVE THE CONE CRUSHER AND BENEATH THE DECK SCREEN.

THE EE BUMPED HIS LEFT HAND WHILE RETRIEVING A RAG FROM BEHIND THE SEAT OF THE MINE FUEL TRUCK. HIS HAND HAD BEEN PREVIOUSLY INJURED PRIOR TO BEING HIRED.

THE EE WAS ASSISTING WITH CHANGING THE SCREEN CLOTH ON THE POWER SCREEN MENTIONED BELOW WHEN HIS FINGER WAS CAUGHT BETWEEN THE SCREEN CLOTH AND THE STEEL RAIL. THIS RESULTED IN THE TIP OF THE FINGER BEING FRACTURED.

EE WAS LIFTING A 40 LB ANVIL OUT OF THE V.S.I. CRUSHER, THE ANVIL WAS STUCK. HE YANKED ON THE ANVIL WHICH STRAINDED HIS BACK.

TRUCK DRIVER WAS LEAVING TRUCK GOT OUT OF CAB MISSED HAND RAIL AND FELL ON GROUND.

EE WAS TIGHTENING BOLTS ON CRUSHER HAND WITH AIR IMPACT WHEN HIS RIGHT HAND GOT BETWEEN THE IMPACT WRENCH AND A SUPPORT BEAM.

THE TRANSFER BOX FROM BC-21 TO BC-22 WAS FROZEN, AND THE CREW MANUALLY PUSHED THE TRANSFER BOX TO UNSTICK IT. EE WAS ON THE BACK SIDE PULLING THE BOX AND WHEN THE ICE GAVE WAY, THE FORCE OF TH E CREW PUSHING WAS MORE THANT EE COULD REACTO TO, THEREFORE, PINCHING HIS HAND BETWEEN THE TRANSFER BOX AND THE TRANSFER POINT.

EMPLOYEE WAS CLIMBING UP STEPS TO GET ON HAUL TRUCK WHEN HIS FOOT SLIPPED CAUSING A PULLED HAM STRING.

EE WAS REMOVING FILL HOSE FOR WATER TRUCK WHEN HE HIT HIS SELF IN THE LIP WITH THE STEEL END OF THE HOSE.

EMPLOYEE WAS TIGHTENING SIDE PLATE BOLTS ON SHAKER WHEN HE SLIPPED & HIT HIS RIGHT ELBOW ON STEEL BEAM.

EMPLOYEE WAS ADJUSTING DOOR ON SCREEN CHUTE WHEN HE SLIPPED AND FELL ON PC. OF STEEL IN TRUCK BED - SMALL CUT ON TESTICLE.

54736YEE WAS WELDING ON I BEAMS & GOT A PC OF SAND IN HIS LEFT EYE

EE SLIPPED AND FELL OFF TRACK, HAD HARD LANDING ON HIS FEET, THEN LIFTED HEAVY PARTS IN BAD POSITION UNDER DRAGLINE.

STEEL PLATE FROM WELDING TABLE FELL OFF OF SAME AND HIT EMPLOYEE'S LEFT GREAT TOE (FRACTURE).

EE SLIPPED ON ICE AND FELL ON KNEE INJURYING SAME CLEANING IN BIN AT PLANT.

CUTTING SKIRTBOARD RUBBER WITH BELT KNIFE AND IT SLIPPED AND CUT HIM ON LEFT THIGH 4-5" ABOVE KNEE.THE CUT WAS 3/4" X 1/4" AND REQUIRED 5 STITCHES.

.

BACK PAIN DURING OPER OF BULLDOZER.

EMPLOYEE WAS CLIMBING BACK ON CRANE AFTER LUNCH AND PULLED A MUSCLE IN LOWER BACK.

EMPLOYEE CLIMBED INTO SURGE PILE TO REMOVE PO OF METAL TOWER OPERATOR TURNED ON SURGE PILE BELT AND ROCK FELL FROM BELT STRIKING EMPLOYEE HAND.

EMPLOYEE WAS DUMPING LOAD OF SAND GROUND WAS SOFT AND GAVE AWAY AND THE TRUCK TURNED OVER ON ITS SIDE EMPLOYEE BRUISED BACK AND ARM.

EMPLOYEE WAS PU5LING SCREEN OUT WHEN SCREEN WAS CAUGHT UNDER SIDE RAIL AND HE PULLED TOO HARD AND CAUSED INJURY.

EMPL TAKING SCR9ENS UP STEPS AND CAUGHT FINGER IN SCREENS AND BENT FINGER BACKWARDS.

EMPLOYEE WAS PL5CING A BEARING ON A SHAFT WITH A HAMMER-HAMMER STRUCK RACE OF BEARING SLIVER OF RACE STRUCK EMPLOYEE ON LEFT SIDE OF FACE-METAL PARTICLE REMOVED AT LABURNUM MEDICAL CENTER-11- 12-86 3

FOREIGN MATTER 3N LEFT EYE. DRIVING QUARRY TRUCK WHEN ROCK FELL OFF LOADER BUCKET AND HIT SIDE BLASS OF TRUCK GLASS FLEW INTO LEFT EYE.

EMPLOYEE SHUT D2OR OF CRANE ON HAND BROKE THIRD FINGER ON RIGHT HAND LACERATION FOUR STITCHES.

EMPLOYEE WAS GRINDING EDGE OF METAL PLATE-HE WAS WEARING SAFETY SHIELD-METAL PARTICLE FLEW INTO RIGHT EYE.

EMPLOYEE JUMPED FROM REAR OF ATHEY WAGON AND LANDED ON RIGHT FOOT THUS BREAKING ANKLE

EMPLOYEE STRUCK RIGHT KNEE ON CONVEYOR

EMPLOYEE WAS CUTTING PC.OF STEELPLATE-HOSE LINE CONNECTION BROKE CAUSING FIRE AT END OF HOSE.BURNED RIGHT FOREARM.

EMPL SLIPPED AND FELL ON LITTLE FINGER WHILE PUTTING SCREEN IN SPEED REDUCER.

EMPLOYEE WAS REPLACING SCREENS IN VIBRATORY SCREEN AND FOREIGN MATTER FLEW INTO RIGHT EYE.

SUBJECT WAS OPERATOR OF CAT 630 WAGON AFTER BEING LOAD VEHICLE STATED UP RAMP OPEN PIT TRANSMISSION JUMPED OUT OF GEAR VEHICLE STALLED AND SUBJECT JUMPED NOT .

EMPLOYEE WAS DRILLING HOLE IN PC OF METAL WHEN HE CAUGHT 3 FINGERS ON LEFT HAND BETWEEN METAL AND CLAMP FRACTURE MASHED AND CRACKED FINGERS 3 ON LEFT HAND

EMPLOYEE ASSUMED THAT HE HAD DICONNECTED THE SAFETY SWITCH, APPARENTLY HE DID NOT HE THEN PROCEEDED TO CHECK CONTENUITY OF FUSES WITH TESTER,. FUSE SHORT CIRCUITED AND EMPLOYEE\S HANDS WERE BURNED.