Buscar en el registro

Was rechaining crusher rotor during removal when the victim put weight on the rotor and it turned pinning left leg between rotor and frame.

Locking out power to wash screen, when panel arc flashed and the injured employee suffered 2nd degree burns to back of hand and 1st degree burns to face and arm.

Was changing tip on pressure washer when miner bumped trigger and injected water into left thumb.

During plant repairs, injured person removed a metal guard and set it aside. The guard tip over and hit above the metal toe on his right foot. This caused a break in the foot. Tried to keep working but foot began to swell with discomfort. Went to walk in clinic.

Stepped from one loader platform to next to clean his windows and rolled his ankle.

Tightening bolts on jaw crusher and felt knee strain.

When drilling, the driller needs to lift drill rods an place on drill mast to add length, when driller was doing this he felt what he thought was a muscle "tweek". This feeling did not improve, went to doctor and found out he had a hernia.

Tightening bolts under screen when wrench slipped off and hit back of right hand on piece of metal. Sprained back of hand and broke 3rd finger.

Wheel crusher had a small rock lodged in it. Put a spanner wrench on main shaft to spin backwards. EE pulled on wrench and wrench slipped off. He fell backwards into crusher upright support and hurt his back side. Doctor gave him medication which made him drowsy.

Changing a screen. Prying old screen up and bar slipped and handle struck just above right eye. 1" gash required 3 stitches to close.

86 Mack cabover carrying solaire air compressor for drill, air compressor caught fire, took nearly 30 min to put out, fire department was involved, no injuries. Two employee's from Givelich Explosive were just starting to drill shot when air compressor caught fire.

Rosk wedged in bottom of hopper door vibrating Grizzly Feeder. One employee was hitting the rock with sledge hammer and a piece of rock broke off and hit another employee in the eye standing adjacent on catwalk causing damage to right eye. Had PPE off to wipe eyes.

Cold steel, employee climbed on top of jib laying on a crusher wheel on the ground to hook a shackle to it. Standing 3-5' off ground and slipped and fell backwards landing on a rock. Broke rib, puntured lung, & fractured 3 vertabrae.

Stepping up ladder into Wabco haul truck BD13, when foot slipped on rung. Right knee struck step and ground. Employee had a pre-existing condition with this knee.

EMPLOYEE PERFORMING PRE-SHOT INSPECTION IT WAS MUDDY AND DARK. THE MUD STUCK TO HIS BOOT AND WHEN HE WENT TO MOVE, HE FELL ONTO A POINTED ROCK ON HIS LEFT SIDE OF HIS UPPER CHEST.

CHANGING CAGE ON WHEEL CRUSHER. WHEN TO PULL LAST BOLT FROM HUB ON OLD WHEEL AND DID NOT HAVE CRANE ATTACHED TO TOP OF WHEEL TO IMMOBILIZE IT. WHEEL TURNED WHEN RELEASED AND PINCHED EE'S LOWE R LT. HAND BETWEEN WHEEL-CAGE AND HUB AND IMPACTSOCKET. CRUSHED LITTLE FINGER AND LOWER HAND.

CAME INTO WORK, WALKED PAST CONTROL ROOM AND TRIPPED OVER ELECTRIC CABLE TO CRUSHER AREA. FELL FORWARD AND USED LEFT ARM TO PREVENT FALL. BROKE BONE IN LEFT FOREARM.

HELPING MOVE CRUSHER WHEEL INTO POSITION, WHEN TWISTED RIGHT KNEE. INJURY BECAME INFLAMED A FEW DAYS LATER.

FELL OFF OF SOME STEPS 5 FT TO THE GROUND.

EMPLOYEE WAS GETTING OFF A PIECE OF EQUIPMENT. HE SLIPPED ON MUD ON TRACKS AND FELL TO THE GROUND.

HE WAS HOSING OFF UNDER CONVEYOR BELT WHEN A LARGE ROCK FELL OFF THE CONVEYOR HITTING HIS LEFT KNEE.

WELDING A LOADER BUCKET IN A TIGHT LOCATION. STICK WELDING, BENT WELD STICK TO GET IN TIGHT LOCATION. REACHED INTO START WELDING BEFORE SHIELD CAME DOWN AND TOUCHED OTHER STEEL AND ARCH BURNED HIS EYES.

EE WAS USING A PRY BAR, ATTEMPTING TO DISLODGE AN OVERSIZED ROCK FROM THE FEEDER, WHEN PRY BAR SLIPPED & EE FELL BACKWARDS OFF OF CATWALK.

HE WAS DESCENDING STEPS ON D-9 DOZER SLIPPED ON STEEL STEP ON PUSH ARM AND FELL ON HIS BACK & TAILBONE AREA, ALSO HIT LEFT SHOULDER ON SIDE OFDOZER TRACKS

WHILE PATHCING A HOLE IN A CONVEYOR BELT AND CUTTING RUBBER PATCH RAZOR BLADE SLIPPED AND CUT INTO LEFT LEG.

EMPLOYEE WAS PULLING A PIECE OF RUBBER CONVEYOR BELTING FROM A STORAGE PILE IN MAINTENANCE YARD. WHEN HE STRAINED HIS LOWER BACK.

EE WAS MANUALLY MOVING ROCKS THAT WERE STUCK IN CRUSHER JAW WHEN HE STRAINED HIS LOWER BACK DUE TO LIFTING ROCKS.

EE WAS WORKING ON MAINTENANCE AT MAIN ROCK CRUSHING PLANT WHEN HE STEPPED ON TO THE HANDRAIL NEXT TO THE 66" ROCK CRUSHING CONE TO GO AROUND CO-WORKER. EE PUT HIS HAND ON EE'S HARD HAT, THEN W HILE WALKING BY ON RAIL, SLIPPED AND FELL OFF RAIL, BOUNCED OFF OF CONVEYOR BELT TAIL PULLEY GUARD. HE FELL IN TOTAL 15 FT TO THE GROUND, LANDING ON HIS BACK AND SIDE IN THE DIRT AND ROCK BES

HE WAS PULLING ON A WRENCH TO TIGHTEN THE MOTOR ON THE SCREEN DECK AND PULLED HIS LOWER BACK, RUPTING TWO DISKS IN HIS BACK.

EE WAS WORKING UNDER CATERPILLER BULLDOZER WHEN METAL & DIRT PARTICLES FELL INTO RT EYE, CAUSINGIRRITATION THAT INCREASED SEVERAL HRS LATER UNTIL HE REQD MED TREATMENT TO REMOVE FOREIGN BODY IN RT EYE. AFTER REMOVED EE RETD TO WORK WITH NODAMAGE TO EYE

WHILE OPERATING SKID STEER, EE WAS WORKING AROUND CONVEYOR BELT AT LOWER PLANT AND DROVE UNDER CONVEYOR BELT WHEN A ROCK CAME OFF THE BELT AND FELL ON HIS RT. KNEE CAUSING BRUISING AND A CONTU SION.

EE WAS WORKING ON REPLACEMENT OF CRUSHER JAW & WAS WAITING FOR EE OPERATING CRANE TO MOVE ROCK BOX. THE CRANE WAS LIFTING THE ROCK BOX WHEN ROCK BOX GOT HUNG UP AND WAS SPRUNG-LOOSE. THE ROCK BOX RAMMED INTO EE & PUSHED HIM INTO RAILING

EMPLOYEE SET SMALL PIECE OF STEEL TO BE WELDED INTO PLACE. STEEL SLIPPED AND INJURED LEFT THUMB WITH BRUISING AND A LACERATION.

EMPLOYEE WAS WALKING AROUND TO DO A PLANT INSPECTION. HE SAW THAT THE PLANT A.C. STACKER HAD STOPPED AND RAN TO THE CONTROL VAN TO TAK ECARE OF IT. IN THE PROCESS OF HURRYING HE STEPPED IN A LOW SPOT IN THE GROUND AND HYPEREXTENDED HIS RIGHT KNEE.

A COWORKER DROPPED A PIECE OF LUMBER FROM BARMAC EQUIPMENT CATWALK ABOVE EE. EE WAS SHOVELING DIR WHEN THIS PIECE OF LUMBER FELL & HIT HIM IN THE LEFT LOWER LEG MUSCLE & TOP OF LEFT FOOT.

EE WAS PICKING UP A PART THAT FITS ON THE LOADER BUCKET AND STRAINED HIS LOWER BACK.

HE WAS COMPLAINING OF LOWER BACK PAIN AND SAID IT WAS FROM DRIVING AN OFF ROAD BACK DUMP TRUCK.

WHILE FRONT END LOADER WAS LOWERING BARRELS OF FLIGHT THE LOAD BEGAN TO SLIP FROM THE BUCKET. EMPLOYEE ATTEMPTED TO STOP SLIPPAGE OF BARREL OF FLIGHT BY LIFTING BARREL CAUSING HIM TO HURT HIS LOWER BACK.

WELDING UNDER JAW CRUSHER [CONFINDED AREA]

EMPLOYEE WAS HOLDING PIN WHEN OTHER WORKER SWUNG A SLEDGE HAMMER AND IN THE PROCESS MISSED THE PIN CAUSING THE SLEDGEHAMMER TO HIT EMPLOYEE RIGHT CHEEK AND EYE AREA.

NORMAL CONDITIONS EMPLOYEE WAS NOT WATCHING HIS FOOTING AND SLIPPED ON JADAIR CATWALK. WHEN HE SLIPPED HE HIT HIS MIDDLE RT. SIDE OF LOWER BACK.

WHILE REMOVAL OF ROLLERS AND ASSEMBLY, THE ASSEMBLY WAS DROPPED FROM A HEIGHT OF 3 FEET ON TO THE BACK OF EMPLOYEE. EMPLOYEE WAS PERFORMING WORK BELOW OTHER WORKERS. THE WORKER ABOVE REMOVED T HE ROLLER ASSEMBLY AND IT FELL ON TO INJURED EMPLOYEE'S LOWER BACK.

EMPLOYEE WAS GETTING OUT OF HIS PICKUP TRUCK TO OPEN GATE TO PIT. HE SLIPPED ON SNOW AND FELL WITH RIGHT LEG TWISTED UNDER HIM. DISLOCATED KNEE , REQUIRED SURGERY.

IT WAS A COLD MORNING 40 DEGREE WITH THE WIND COMMING OUT OF THE SOUTH. HE WAS SPLICING A BELT WHEN HE CUT HIS RIGHT THUMB.

AFTER FINISHING A WELD HE LIFTED UP HIS PROTECTIVE HOOD WHILE STANDING NEXT TO ANOTHER WELDER WORKING, THEN HE WAS STRUCK IN THE EYE BY A PIECE OF SLAG METAL IN HIS LEFT EYE.

EMPLOYEE WAS INFLATING LOADER TIRE. TIRE EXPLODED SPRAYING EMPLOYEE WITH GRAVEL IN FACE, NECK & LEGS.

CLEANING GREASE FROM DRAGLINE BELT. RAG CAUGHT IN DRAGLINE BELT TWISTING FINGER.

OPERATING CRUSHER FROM SEAT IN CONTROL TRAILER. STOOD UP AND GRABBED DOOR FRAME. WIND CAUGHT DOOR AND DOOR SLAMMED SHUT ON HAND.

TIGHTENING BOLTS ON CRUSHER. BACKED UP AND HIT SHOULDERS ON BIG PIECE OF ANGLE IRON.

MAN CUT LEFT KNEE WITH A UTILITY KNIFE WAS CUTTING A PIECE OF RUBBER TO PUT ON SCREEN LIP MAKE WHEN THE KNIFE SLIPPED AND CUT KNEE. RECEIVED FOUR STITCHES.