Buscar en el registro

EE WAS DRIVING THE DRILL DOWN A RAMP WITH THE MASK UP, WHICH MADE IT OFF BALANCE & TIP.

DRIVING SLOW UNDER ROUGH CONDITIONS.

EE WAS CLIMBING DOWN LADDER TO FUEL TRUCK AND SLIPPED ON RUNG DUE TO RAIN & MUD EE FELL 3FT TO GROUND CONTUSIONS TO R SHOULDER R FOREARM R CHESTWALL & BACK

EMPLOYEE WAS CLEANING UP AROUND PLANT WHEN DUST WAS BLOWN INTO HIS GOGGLES CAUSING EYE IRRITATION. EMPLOYEE'S EYE WAS FLUSHED WITH EYEWASH. HE THEN SOUGHT MEDICAL TREATMENT.

EMPLOYEE HAD JUST DUMPED LOAD OF ROCK, WHEN HE WAS DESCENDING RAMP, THE BRAKES FAILED CAUSING THE TRUCK TO STRIKE BIG ROCK AND ACCORDING TO EMPLOYEE BOUNCE SIDEWAYS. EMPLOYEE CLAIMS HE WAS SLAMMED AGAINST DOOR AND STEERING WHEEL, CAUSINGRE-INJURY TO THE BACK. WE QUESTION EMPLOYEE'S INJURY CLAIM.

EE WAS TRYING TO RAISE HEADREST ON HIS DOZER SEAT IT WAS NOT MOVING SO HE YANKED REALLY HARD HEADREST CAME OFF & STRUCK HIM IN THE FACE BREAKING HIS NOSE

EMPLOYEE WAS LOADING BOULDER ONTO A TRUCK WHEN THE BOULDER FELL OUT OF BUCKET CAUSING THE BACK-END OF LOADER TO LIFT OFF THE GROUND. EMPLOYEE SUSTAINED RE-INJURY TO LOWER BACK DUE TO IMPACT WH EN THE LOADER RETURNED TO THE GROUND.

PULLED MUSCLE IN RIGHT ARM WHILE LIFTING ROCKS TO UNCLOG JAW.

EE'S THUMB WAS HIT BY A ROCK WHILE CLEARING OVERSIZED ROCK STUCK IN JAW. RESULTED IN BROKEN RIGHT THUMB

EE WAS CHANGING A STRIKER BAR ON THE IR-DRILL WHEN THE BOTTOM END OF THE DRIFTER WHICH THE STRIKER BAR SLIDES INTO STARTED TO SLIP. EE REACHED FOR THE BOTTOM END AND FELT A POP IN HIS LEFTY SH OULDER. THE INCIDENT WAS NOT REPORTED BY THE EE UNTIL THE NEXT DAY. COMPANY PROCEDURE NOT FOLLOWED.

WERE REMOVING WHEEL FROM 475-B LOADER FOR TRANSPORT WHEN WHEEL UNEXPECTADLY CAME OFF.

REMOVING A SPARE TIRE FROM THE CRRAIAGE, IT FELLON HIS RIGHT ARM.

EMPLOYEE WAS LAYING ON SURFACE, CUTTING A BOLT.

WIND GUSTING UP TO 50 MPH. PARTICLE OF DUST GOT IN EYE OF EMPLOYEE. EMPLOYEE WAS WEARING SAFETY GLASSES.

EE WAS ATTEMPTING TO LOOSEN NUT ON BOLT ON MOTOR BASE, WHEN WRENCH SLIPPED OFF OF NUT, EE FELL BACKWARDS AGAINST HANDRAIL AND CRACKED 3 LOWER RIBS.

EMPLOYEE WAS HOLDING CHISEL WITH PLIERS. OTHER EMPLOYEE HIT CHISEL. PIECE OF STEEL BROKE OFF CHISEL HEAD AND EMBEDDED IN EMPLOYEE RIGHT FOREARM.

WAS WALKING ACROSS WET DECK ON DREDGE BY FRESH WATER PUMP, SLIPPED, FELL AGAINST MUFFLER ON DREDGE MOTOR.

HAD COMPLETED WALK AROUND AND WAS CLIMBING ACCESS LADDER TO 773B CAT TRUCK. WHEN HE LOST HIS BALANCE AND CAUGHT ALL WEIGHT ON RIGHT SHOULDER. DID NOT REPORT AT THAT DATE BECAUSE HE SAID HE WAS OKAY AND DID NOT NEED MED. TREATMENT. NOW PAIN HAS RESURFACED AND MEDICAL TRT IS BEING SOUGHT.

EMPLOYEE WAS DRILLING HOLES IN STRATHMANN QUARRY FOR A PRODUCTION SHOT. WAS RELOCATING DRILL TO START NEW ROW OF HOLES AND GOT TOO CLOSE TO EDGE OF HIGHWALL AND BACKED OVER A 20' EMBANKMENT. I N THE DROP THE DRILL TURNED UPSIDE DOWN WITH EMPLOYEE IN CAB. HAS SCRATCH ON HEAD AND TENDON DAMAGE TO LEFT KNEE. (AIR CASTED)

EE WALKING STEPPED WRONG WAY AND SPRAINED FOOT

EE WAS CLIMBING DOWN FROM THE CONVEYOR ONTO PICKUP BED (DID NOT SLIP OR FALL). EE HAS LOWER BACKSTAIN AND IS TO BE ON LIGHT DUTY FOR A FEW DAYS.

EE WAS PULLING THE DRILL UP HILL IN MUD WIHT A D88 DOZER. WHEN THE CHAIN BROKE. THE CHAIN WRAPPED AROUND EE'S LEFT SHIN CAUSING A CUT AND BRUISING.

EMPLOYEE WAS RUNNIGN SKID STEER LOADER WHEN ROCK CAME OFF THE GRIZZLEJAW LANDING AND CAME IN THE FRONT OF SKID STEER LOADER AND HIT EMPLOYEE ON THE LEFT KNEE.

EE WAS LAYING ON HIS SIDE BURNING/CUTTING WITH A TORCH, TO CUT A CAST IRON SLEEVE FOR REPAIR TO AC CRUSHER. IRON SLAG POPPED & HOT SLAG FLEW UP IN THE AIR LANDING IN LEFT EAR TRAVELING DOWN CA NAL. THE HOT SLAG PERFORATED THE EAR DRUM & CAUSED INFECTION. IT WAS RINSED & ANTIBIOTICS PRESCRIBED EE IS SEEING A SPECIALIST BECAUSE SLAG IS STILL IN EAR & HAS LOST HEARING IN LEFT EAR.

THE 45 CONE PLANT WENT DOWN. EMPLOYEE HAD THE PLANT SHUT DOWN SO HE COULD CHANGE THE DIVERTER CHUTE FROM THE 45 TO THE 54 CONE. THE CHUTE WAS STUCK SO EMPLOYEE PUT HIS HAND OVER THE TOP OF CHU TE, AND KICKED THE LEVER THAT CONTROLS THE GATE.THE GATE CAME FREE & FLOPPED OVER,PINCHING EMPLOYEES FINGERS BETWEEN THE WALL AND THE GATE.

EE WAS GOING DOWN A PATH AND PART OF THE CLIFF GAVE OUT FROM UNDERNEATH FOOT AND FELL ABOUT 16-18INCHES, TWISTING BACK. X-RAYS TAKEN AT LOCAL CLINIC SHOW NEGATIVE

EE WAS WELDING, CUTTING, CHIPPING, & GRINDING METAL TO REPAIR THE BUCKET OF THE CAT 992 LOADER2 OTHER WELDERS WERE ALSO WORKING THE BUCKET. EEEYE BEGAN TO BURN, THE EYE WAS WASHED, BUT THE IRRITATION CONT. LEFT EYE HAS AN IRRITATION/BURNFROM THE REFLECTIVE FLASH, & THE EE HAS BEEN PLACED ON RESTRICTED DUTY FOR 48 HOURS

EMPLOYEE WAS SHOVELIGN UNDER BELT WHEN THE FLOW OF MATERIAL WENT LGIHT. UNDER THIS CONDITION MATERIAL ROLLS BACK AND KICKS OFF AND FALLS TO GORUND. ROCK STRUCK EMPLOYEES HARD HAT ON THE HEAD , CAUSING POSSIBLE SLIGHT CONCUSSION AND NECK SPRAIN.

WHILE TURNING PULLEY TO UNSPOOL CABLE LEFT MIDDLE FINGER WAS SMASHED BETWEEN PULLEY AND FRAME OF CONVEYOR.

EE HAD THE SPOON PROPPED UP ON A PIECE OF ANGLE IRON WHILE HE WAS WELDING ON THE SPOON. THE SPOON SLIPPED OFF THE ANGLE IRON AND LANDED ON HIS LEFT FOOT, ABOVE THE STEEL TOE.

EE WAS CRAWLING ON HANDS AND KNEES TO REPAIR CONVEYOR BELT. WITH NO KNOWN OBJECT OF DIRECT CAUSE, LEFT KNEE HAS SUFFERED SOME STRAIN. FOR FURTHER DETERMINATION. EE ON LIGHT DUTY.

LIFTING HEAVY PARTS WHILE MAKING REPAIRS ON HEAVY EQUIPMENT. PULLING MSUCLE IN SHOULDER S AND BACK CAUSING SORENESS IN SHOULDERS AND BACK.

HOT DAY WITH NO AIR MOVEMENT. HUMID WEATHER.

THIS EMPLOYEE DID NOT REPORT THE ACCIDENT UNTIL 9-3-96 WHEN HE WENTTO DR LIFTING AND STACKIGN RAILROAD TIES, HE STRAINED HIS BACK.

ROCK FALL LEFT OF SIDE HEAD.

EE WAS USING AVOLTPROBE 440 TO TEST FOR BLOWN FUSE IN A 440 VOLT CONTROL BOX. THE POWER WAS ON IN THE CONTROL BOX IN ORDER TO TEST. EE MUST OF CONTRACTED A LUG OR HIT WIRE WHILE TESTING AND WAS SHOCKED.

EMPLOYEE WAS MOVING SOME ANGLE IRON & WAS BRACING IT WITH A PRY BAR AND THE ANGLE IRON SLIPPED AND FELL ON EMPLOYEE'S LEFT SHIN LEAVING A SCRAPE AND FELL TO THE LEFT FOOT FRACTURING A BONE. R ETURNED TO WORK WITH SOME RESTRICTIONS.

EE WAS STEPPING OFF ONE CONVEYOR TO ANOTHER WHEN HIS COVERALLS BECAME CAUGHT ON A BOLT CAUSING HIM TO SLIP AND TWIST HIS ANKLE.

EE WAS CUTTING A RUBBER HOSE WITH A KNIFE, WHEN HE CUT THE PALM OF HIS HAND AND WRIST. HE RECEIVED NINE STITCHES.

EMP WAS CLIMBING DOWN FROM R-35 TRUCK, WHEN HIS FOOT SLIPPED OUT FROM UNDERNEATH HIM. FELL DOWN LANDING ON HIS BACK.

EE WAS GRINDING TO MAKE REPAIRS ON THE TAIL WHEEL AND DIRT AND SLAG IN RIGHT EYE AND SEEN THE DR AND REMOVED THE FOREIGN OBJECTS.

EE WAS CLIMBING UP ON THE 6X20 FEED BELT TO LOOKAT THE HEAD OF THE CONE DISCHARGE. HE SLIPPED & FELL ON THE BELT HITTING A BRACE THAT RUNS OVER THE BELT.

HURT LOWER BACK WHILE SHAKING ROCK FROM RIP RAP BUCKET.

DOING SHOVELING AROUND BELTS & A LOT OF OVERHEADLIFTING. THEN GOT ON LOADER WHICH HAD A BROKEN SPRING IN SEAT WHICH WOULD NOT GIVE WHEN LOADING.

PROPER DISMOUNTING TECHNIQUES OR POSSIBLY MODIFYING EQUIPMENT.

EMPLOYEE WAS DRILLING IN THE PIT AND WAS COMING OUT OF THE DRILL HOLE WITH MACHHINE AND COUPLING ABOVE CAME LOOSE, ALLOWING IT TO COME DOWN AND IT HIT EMPLOYEE ON THE LEFT SHOULDER. AFTER DR' S VISIT HE IS TO BE RESTRICTED DUTY FOR A COUPLE OF DAYS AND RETURN FOR A RECHECK BEFORE PERMITTED TO RETURN TO REGULAR DUTIES.

EE WAS TIGHTENING BOLTS ON ROCK BREAKER ATTACHMENT, WRENCH SLIPPED OFF LARGE NUT, CAUSING STRAIN, PULLING MUSCLE IN LOWER BACK.

EE WAS DOING ROUTINE MAINTENANCE WORK WHEN TEMPERATURE WAS 101 DEGREES. HEAT INDEX WAS 110 DEGREES.

EMPLOYEE WAS REMOVING SHAFT/CLUTCH ASSEMPLY FROMT EH PUG MILL AT THE ASPHALT PLANT, WORKING BLIND, THE SHAFT SLIPPED AND SEVERELY PINCHED RIGHT MIDDLE FINGER BETWEEN SHAFT AND FRAM.E 5 STITCH ES WERE REQUIRED TO CLOSE OPENING.

EMPLOYEE WAS UNPLUGGING THE TGRIZZLEY BELT & THE PRY BAR BROKE LOOSE STRIKING EMPLOYEE IN JAW AREA ON RIGHT SIDE EMPLOYEE HAS NO FACIAL CUT OR BRUISE BUT POTENTIAL INTERIOR NERVE DAMAGE TO RT SIDE OF FACE MAY NEED FURTHER MEDICAL CARE FOR OBSERVATION OR MORE THAN OBSERVATION