Buscar en el registro

When rotating the classifier wheel pinched his finger between wheel and an obscure lip on the classifier body behind the wheel.

While employee was working on mill, he pinched palm of his left hand causing a laceration which required sutures.

While employee was installing shims in the ACM Mill classifier wheel he cut his thumb on one of the shims.

While employee was putting supplies away his hand brushed across the sharp edge of a bracket causing a gash to back side of left hand.

Employee was using shovel to rake garnet away from screen. The shovel caught in the pulling motion which caused employee's back to twist in the opposite direction. (Lost time began 7/21/06)

EE states that he slipped on steel stairs and struck his right shin on edge of step causing laceration.

Employee was changing bags in the dust collectors and the repetitive motion of using a screwdriver and ratchet may have caused the swelling. Note: Lost time began 8/26/05.

Employee states that while getting ice cubes out of the ice machine in Plt 2 lunchroom he noticed the ice bucket was overflowing so he dumped some ice out of the bucket. In doing so some ice fell out of the bucket onto the floor. EE then stepped on the ice and his feet went out from under him. he landed full weight on his shoulder.

Employee states that while he was working on the tail pulley bearing on elevator 015 he went to turn around and ran his knee into a piece of steel jutting out.

Employee states when he was coming around corner from ACM mill to check on #6 F-1 mill he slipped on a patch of ice on floor.

EE STATES THAT HE WAS CHANGING THE AIRLOCKS ON LINE 2 (PLT. 2). WHEN HE LIFTED AIRLOCK HE HURT HIS BACK.

EE STATES THAT WHEN HE WENT TO DUMP A WHEELBARROW OF PRODUCT HE FELT SOMETHING PULL IN HIS BACK.

EMPLOYEE STATES THAT BELT 001 WAS FROZEN TO TAIL PULLEY AND ROLLS AND THAT HE WAS PRYING BELT LOOSE WHEN HE STRAINED HIS BACK.

EE STATES THAT HE WAS GETTING A GAS TANK FOR A FORK LIFT AND AS HE WAS CARRYING IT INTO THE PLANT HE SLIPPED ON SOME ICE AND PULLED SOMETHING ON THE BACK SIDE OF HIS LEFT KNEE.

WHILE DRAGGING THE HI-VAC HOSE (WITH ANOTHER EMPLOYEE) OVER TO THE TRANSPORTER, EMPLOYEE TRIPPED ON THE HOSE AND TWISTED HIS LEFT KNEE.

EE WAS CHANGING SEAT AND FLOP GATE ON VAC., VALVE ACTIVATED AIR PISTON AND END OF FINGER ON RT. HAND GOT CAUGHT.

A PALLET STOPPED BETWEEN A CHAIN CONVEYOR AND ROLLERS. AN EE GOT UP ONT HE CHAIN CONVEYOR TO PUSH THE PALLET OUT. HE DID NOT LOCK OUT THE CONVEYOR. ANOTHER EE CAME ALONG, SAW THE PALLET STOPPE D, AND WENT TO HIT THE BUTTON TO START THE CONVEYOR. WHEN HE HIT THE BUTTON, THE CONVEYOR SUCKED THE FIRST EE'S LEG BETWEEN IT AND THE ROLLERS. THE FIRST EE HAD GOTTEN BEHIND THE PALLET WITHO

WHEN EMPLOYEE LIFTED ROLLS UP FOR SCALE THE STRAP SLIPPED ON FORK AND CAME DOWN ON RIGHT FOOT BEHIND THE STEEL TOE.

EMPLOYEE STATES THAT WHILE BRUSHING SCREENS HE FELT A SPASM IN HIS LOWER BACK. STATES THAT HE STOPPED UNTIL SPASM WENT AWAY. HE STARTED BRUSH-ING SCREENS AGAIN AND THE SPASM CAME BACK. THIS TIME IT DIDN'T STOP.

WHILE EE WAS GETTING DOWN FROM THE HEATER PIPE WHICH HE WAS STANDING ON TO TRY AND UNPLUG THE DRYER INLET PIPE, WHEN GETTING DOWN HIS FOOT SLIPPED AND HIS LEFT KNEE CAME INTO CONTACT WITH THE ANGLE FROM FLANGE.

WHILE EE WAS OPENING A PALLET OF BAGS WITH A UTILITY KNIFE, THE KNIFE SLIPPED AND CUT THE INSIDEOF HIS LEFT FOREARM.

WHILE TWO OTHER EMPLOYEES WERE PULLING EE OUT OF #1 PEBBLE MILL (ONE ON EACH ARM), THE MAN ON HIS LEFT ARM PULLED TOO HARD.

WHILE EMPLOYEE WAS DUMPING 99 LB. BAGS OUT BACK, HSI SHOULDER PULLED OUT.

WHILE EE WAS WORKING ON #2 PEBBLE MILL--NEW FEED SPOUT--DUST WAS FALLING AND GOT INTO HIS EYES.

EE WAS NOT WATCHING WHERE HE WAS STEPPING AND WALKED INTO A PIECE OF PLYWOOD CAUSING A BRUISE TO HIS LEFT KNEE/SHIN AREA.

WHILE EE WAS CUTTING UP CARDBOARD BOXES WITH A STANLEY KNIFE HIS HAND SLIPPED AND THE KNIFE WENT INTO HIS LEFT THIGH.

A CONTRACTOR'S EE FELL OFF SOME SCAFFOLDING WHILE INSTALLING A GAS LINE IN THE MILL. THE EE ENDED UP WITH A BROKEN WRIST ALTHOUGH THE DR RELEASED HIM FOR LIGHT DUTY THAT SAME DAY

WHILE EE WAS CHECKING AN AIRLOCK THE TIP OF HIS MIDDLE FINGER, LEFT HAND, GOT CAUGHT BY THE AIRLOCK 211A AND WAS CUT OFF.

WHILE EMPLOYEE WAS ON THE ROOF CHECKING HIS EQUIPMENT, HE SLIPPED ON SNOW COVERED ICE. HIS FEET WENT OUT FROM UNDER HIM AND HE LANDED PARTIALLY ON HIS LEFT SIDE AND BACK.

EE HURT HIS BACK WHEN HE SLIPPED ON THE FLOOR AND HIS PANTS LEG CAUGHT ON CHEMICAL CART. HE FELL ON HIS KNEE AND HURT HIS BACK/SIDE.

EMPLOYEE STATES THAT WHEN PULLING ON BAG LOPS HIS BACK CAUGHT.

WHEN EMPLOYEE WAS PULLING AN EMPTY BAG ON BAGGER HE REACHED OVER AND PULLED HIS BACK.

WHILE EMPLOYEE WAS GETTING OFF THE FORKLIFT HE CAUGHT HIS FOOT UNDER THE GAS PEDAL CAUSING HIM TO TWIST HIS RIGHT KNEE.

EE WAS HELPING ANOTHER EE PICK UP A 20' PIECE OF HEAVY WALL PIPE(USING THE PROPER LIFTING TECHNIQUE) BUT TWISTED ONE THE PIPE WAS IN A RAISED POSITION CAUSING LOW BACK MUSCLE STRAIN. EE DID NO T BEGIN LOSING TIME UNTIL 5/29/98.

WHILE EE WAS WALKING AND CARRYING SOME HOSE HE STEPPED ON SOME ROCKS/ STONES AND TWISTED HIS RIGHT ANKLE.

GRINDING ON PROCESS LINE - FOREIGN BODY IN EYE. WAS WEARING SAFETY GLASSES.

GPF-CARPAL TUNNEL SYNDROME IN BOTH HANDS HAS PROGRESSED OVER THE PAST 5-6 YEARS. EMPLOYEE FIRST REPORTED THE PROBLEM TO HIS SUPERVISOR ON 10-01-97.A C-2 WAS FILED ON 10-06-97 (NO LOST TIME). E MPLOYEE WENT TO SEE A DOCTOR FOR EVALUATION AND WAS TOLD HE WOULD NEED TO HAVE SURGERY ON BOTH HANDS.

EMPLOYEE STATES THAT HE WAS DRILLING TO INSTALL AN ANCHOR IN THE CONCRETE FOR FAN 080 WHEN THE DRILL BIT CAUGHT THE REBAR AND TWISTED THE DRILL IN HIS HAND.

EMP STATES THAT WHILE HE WAS WASHING A GLASS BEAKER THAT HAD A CHIP ON THE TOP WHICH HE DID NOT DETECT BEFORE WASHING IT HE CUT THE PALM OF LEFTHAND WHICH REQUIRED STITCHES.

EE WAS ATTEMPTING TO CALIBRATE A BULK SCALE. HE & ANOTHER EE WERE USING A FORK LIFT TO PUT A 2000 LB. TEST WEIGHT ON SCALE. HE PUSHED ON WEIGHT.

EMP AND 3 OTHER EMPS WERE WORKING TO FIX 2 LP LEAKS. CREW OF MEN WERE BLEEDING THE LINE TO OPEN AND REPAIR THE LEAKS. BLEED OFF CAUGHT ON FIRE AND WHEN THE CREW OF MEN FLED THE LP ENCLOSURE EM P WAS KNOCKED DOWN SKINNING HIS RIGHT KNEE AND LEFT ELBOW AND BRUISING SOME RIBS ON LEFT SIDE.

EMPLOYEE STATES THAT HE WAS SHOVELING AND SWEEPING GARNET AND ROCK WASTE WHEN HE FELT A SUDDEN PAIN IN HIS RIGHT LOWER BACK, RIGHT SHOULDER AND ELBOW.

EE STATES THAT WHILE HE WAS CLEANING UP AROUND BAGGER PICKING UP OLD PALLETS 70LBS AND CARDBOARD HE FELT SEVERE PAIN IN HIS LOWER LUMBAR AREA.

WHLE EMPLOYEE WAS UNLOADING BARRELS OF 200 & C101 OFF DOCK INTO LOADER BUCKET, A BARREL DROPPED AND LANDED ON HIS RIGHT FOOT.

WHILE EE WAS UNPLUGGING FEED CHUTE ON #1 PEBBLE MILLE HE STATES THAT HIS HAND SLIPPED AND SCRAPED A SHARP PIECE OF METAL (ANGLE IRON).

WHEN EMPLOYEE BENT DOWN TO PICK UP A SAMPLE KNIFE THAT HE DROPPED ON THE FLOOR HE PULLED HIS BACK.

WHILE EMPLOYEE WAS WORKING ON PEBBLE MILL A MAN INSIDE MILL HOLLERED TO HIM TO HAND HIM A BOX OF TILE WHEN EMPLOYEE TURNED HE RAN HIS HEAD INTO BOLT

WHEN EE WAS GETTING OFF OF A FORKLIFT HE SLIPPED & CAUGHT HIMSELF STRAINING HIS LOWER BACK.

EMPLOYEE WAS MOVING TRUCK TIRES AROUND ON THE STOCKPILE WHEN HE FELT PAIN IN HIS BACK.

EMPLOYEE PULLED BACK WHEN LIFTING ON AUGER OF SCREW 54.