Buscar en el registro

Was climbing down from the skid steer, bucket has a vertical plate. Employee did not see it and stepped with right foot twisting EE's ankle.

Condition was wet and raining.

Accident involving loader. Cause of the injuries unknown at this time.

Miner was working with a piece of metal and while EE was handling it, the metal cut into EE's right palm. Required a doctor's visit.

Employee was on top of a hopper removing material when employee jumped off and landed 4 feet below, strained right knee.

Minor - Cutting conveyor belt and knife slipped.

Slipped, Fell and injured Right side of Knee & felt pull to Groin area

He was lifting 50 lbs. sacks and loading onto back of truck. After loading about 150 sacks and tossing into truck. He felt a sharp pain on lower back going down left leg.

He was working, stepped on a rock, slipped, fell and then couldn't walk. He injured the Left Knee.

Employee felt a sharp pain in the Groin area while he was working to remove a metal rod from a mobile crusher. Hernia

He was working with Drill Rock Machinery and the Drilling Hammer hit his foot, Fracturing his left foot.

Slip & Fall on walking surface, injured right knee, Meniscal Tear.

He was shoveling material out from machines and underneath. When he went under the machine and was shoveling he felt a pop on his lower back.

He was fixing machinery slipped and fell backward. He fell about 10 feet and landed on his heels. He injuried both heels, left knee and lower back.

Tightening bolts that were loose on the side of a cone. There was little space to move and when he reached and leaned over more and pulled back he put lost of pressure on his back and thats when his side and lower back hurt.

While working on machinery, left middle finger was caught in between two metal pieces, cutting the tip of the finger.

Employee lifted a barrel and felt pain to his umbilical area.

A rock about 4" fell from conveyor striking employee below hard hat on back side of head causing a small scratch.

Hydraulic hose spraying liquid, employee jumped back to avoid spray and landed on right knee.

EE WAS STRUCK BY A LARGE ROCK WHICH CAME FROM THE SIDE OF THE MOUNTAIN THROUGH THE BACK WINDOW OF HIS CAB AND STRUCK THE RIGHT BACK SIDE OF THE SHOULDER AREA.

EE WAS ASSISTING WITH THE HOSES WHEN WAS NOT ABLE TO HOLD ON TO THE HOSE, FELL FROM AN UPRIGHT POSTION TO THE FLOOR LANDING ON HIS LEFT SIDE OF BODY. LEFT ARM WAS CRUSHED BY HIS WEIGHT

EE WAS UNSCREWING DRILL STEMS, PULLING BARS APART VCATCHING HIS HAND BETWEEN BOOM AND BAR CAUSING PAIN TO HIS LEFT WRIST.

EE WAS DROPPING A LOAD OF MATERIAL ON JAW CRUSHER WHEN DRILLER OPERATOR ASKED EE FOR HELP IN MOVING A ROCK THAT WAS IN THE WAY OF MATERIAL FLOW, WHILE TRYING TO REMOVE ROCK, EE STEPPED ON THE ROCK INJURING KNEE.

EMPLOYEE WAS HELPING JAW CRUSHER OPERATOR TO REMOVE SOME ROCKS FROM JAWS.AS THEY WERE IN THE PROCESS OF MOVING A ROCK EMPLOYEE SLIPPED CATCHING HIS FOOT BETWEEN 2 ROCKS. ROCK SHIFTED AND CRUSH

EMPLOYEE WAS TRANSPORTING A LOAD OF ROCK TO THE CRUSHER IN A PIT TRUCK. AS HE WAS DRIVING DOWN THE ROAD TO THE CRUSHER HE APPARENTLY LOST CONTROL, VEERED TO THE SIDE OF THE ROAD, STRIKING 2 B ERMS APPROX 80' APART. THE EMPLOYEE WAS EJECTED FROM TEH CAB OF THE TRUCK AT POINT OF FINAL IMPACT.

EE WAS PICKING UP A SPRINKLER THAT WAS STUCK IN THE MUD WHEN HE BENT DOWN HE INJURED HIS BACK.

EE WAS HELPING ANOTHER EE CHANGE SCREENS ON THE SHAKER WHEN HE SLIPPED & FELL ON WALKWAY. SURFACE WAS WET DUE TO THE RAIN.

EE WAS CHANGING TAIL PULLEY BEARING WHEN THE TAIL PULLEY SLIPPED AND SMASHED HIS THUMB.

EMPLOYEE'S WERE CHANGING SCREENS ON 1313 PLANT AT THE TOP DECK. REMOVING SCREEN TO DROP TO BOTTOM. HOOK GOT CAUGHT ON HIS JACKET PULLING HIM OVER THE SIDE. FELL 10' DOWN WITH SCREEN LANDING ON TOP OF HIM.

EMPLOYEE WAS WORKING ON DECK PUTTING V-BELTS ON SCREEN 1. TRYING TO GET PULLEY TO GET A FULL TURN, SLIPPED AND CUT HIS KNEE.

SCREEN ON ROCK WASHER STOPPED. HE WALKED INSIDE VAN & OPENED FUSE BOX. THE FUSES WERE OUT, SO HEREMOVED ALL THREE FUSES. HE PUT 1 FUSE IN, AS HEWAS PUTTING SECOND FUSE, IT EXPLODED SENDING FLA ME OUT OF BOX.

EE WAS CALLED TO ROCK WASHER. ANOTHER COWORKER &EE WERE CHECKING FUSES WHEN COWORKER REPLACED FUSES ON STARTER, THE SECOND ONE EXPLODED SENDING FLAMES AND CAUSING EE'S EYES TO BURN.

EE WAS MOVING DRILL DOWN TO BE FUELD, WHEN HE GOT ON SOME LOOSE MATERIAL AND THE DRILL FLIPPED ON ITS SIDE. EE ACCIDENTALLY JUMPED OUT FALLING ON HIS LEFT SIDE.

EE WAS WORKING ON A SCREENING MATERIAL WASHER & FELL, INJURING SHOULDER/BACK WITH MULTIPLE CONTUSIONS.

WELDING IRON PLATE IN CRUSHER WHEN PLATE SIDE HITTING EE S FINGER RESULTING IN A LACERATION.

PICKING UP SCRAP IRON WHILE WAITING FOR TRUCK TOBE REPAIRED. WHEN LIFTING THE FELT A SLIGHT PAININ HIS STOMACH.

DUST BLEW INTO EYE(RIGHT) WHEN GONZALES WAS CLEANING SHEAVE ON 54" CONE CRUSHER(SHEAVE IS OVERHEAD).

THE TRUCK DRIVER WAS GOING UP A STEEP ROAD WHEN ENGINE DIED OUT. THE DRIVER THEN STARTED TO BACK UP THE TRUCK SLOWLY DOWN THE ROAD. AS HE WAS BACKING UPDOWN THE ROAD HE LOST SIGHT ON THE RIGHT HAND SIDE OF THE ROAD LOST CONTROL TRUCK TURNEDOVER ON ITS RIGHT SIDE.

WORKING AT CRUSHER AREA (SHOVELING) AND STRAINED HIS BACK.

WORKING ON CONVEYOR AND WAS TRYING TO LOOSEN A ROCK THAT WAS STUCK(PRYING) THE ROCK CAME LOOSE AND HIT HIM IN THE STOMACH, CAUSING HIM TO FALL 12 FEET TO THE GROUND.

THE AIR TRACK DRILL WAS BEING MOVED DURING WHIHC AN AIR HOSE SWUNG AND HIT THE HAMMER CONTROL LEVER CAUSING THE TRACKS TO LIFT IN FRONT. WHEN THE OPERATOR APPROACED THE DRILL, THE DRILL STEEL SLIPPED TRAPPING HIS FOOT.

EMPL WAS TURNING POWER OFF TO ONE OF CONTROL PANEL WHEN HE WAS INJURED.

EMPLOYEE STATED THAT HE WAS TURNING ON THE WATER AT THE CRUSHERS AND WHEN HE WAS CROSSING OVER THE CONVEYOR ON THE CROSSOVER STAIRS, HE SLIPPED ON A WET STEP AND FELL HITTING HIS BACK AND HEAD ON THE STEPS. ACUTE SPRAIN AND CONTUSION L-S BACK. CONTUSION HEAD.

EMPL CLEANING OUT UNDERNEATH HOPPER WHERE FRONT END LOADER WAS FEEDING MATERIAL INTO IT.A WELD ON SUPPORTING BRACE BROKE CAUSING ANGLE IRON TO STRIKE EMPL ON LEFT SHOULDER.

EMPLOYEE WAS LIFTING AN OXGYEN BOTTLE INTO A TRUCK AND HIS BACK STARTED HURTING.

EMPLOYEE CLAIMS HE WAS LIFTING A PIECE OF METAL AND FELT A PAIN IN HIS BACK.

THE EMPLOYEE WAS LIFTING A SECTION OF BELTING WHEN HE FELT A PAIN IN HIS LOWER BACK.

THE EMPLOYEE WAS PICKING UP A LARGE ACETYLENE CYLINDER AND HE STRAINED HIS BACK.

EMPLOYEE WAS DRIVING TRUCK WHEN LEFT FRONT STEERING BAL JOINT BROKE LOOSE, CAUSING STOPPING THE TRUCK THE EMPLOYEE STRAINED HIS BACK.

EMPLOYEE WAS WORKING ON BINS FOR HOT MIX PLANT. HE WAS GRINDING A PLATE WITH AN AIR GRINDER WHEN IT SHATTERED AND HIT HIM.