En todo el registro
Envíame un correo cuando un nuevo incidente coincida con estos filtros. Un correo de confirmación; cancela la suscripción cuando quieras.
employee was helping replace a cone liner using a sledge hammer to loosen three inch nuts from liner while striking the nut broke loos resulting in the nut falling on employees foot breaking little toe on right foot requiring 9 stitches
Employee was removing worn cutting edges from front end loader using cutting torch to remove old bolts when cutting edge fell landing on left foot breaking 5 toes
employee stepped off trailer rolling left ankle resulting in hairline fracture returned to duty after missing 2 days of duty
Employee was replacing screens, screen slipped out of hand
Employee was using a pry bar to install a wiper on a sand belt when the pry bar slipped striking a second employee in the right forearm causing fracture.
Employee was organizing a tool trailer, EE stood a sprocket up on it's side, attempted to it up
Employee was performing maintenance on belt when employee slipped due to moisture on footwear.
Employee was checking fluid levels on a track stacker after it shut off. Radiator cap was loose and hot fluid hit employee in face and wrist.
Employee changing fuel filter on loader. Had build up of mud on boots, slipped from loader step.
Employees were changing a sprocket on crusher feeder. Sprocket slipped, lacerating the pinky on left hand requiring stitches.
Walking around the plant site, stepped on uneven ground/rocks, twisting. X-rays showed fractured ankle.
Were replacing a conveyor belt on sander, employee was using screwdriver to travel or rotate belt when hand slipped off striking pulley resulting in stitches to little finger and ring finger on left hand.
Employee stepped out of cat haul truck tweaking ankle which has since turned into a knee injury.
While attempting to hitch trailer to pickup, the weld on the trailer broke. The trailer fell onto miner.
Employee was in the process of cutting a new wiper to replace an old one. The utility knife being used slipped off the wiper & punctured the employee's upper left leg. The employee was taken to the medical center & was given two sutures to close the wound. The employee did not miss any work nor was given any work restrictions.
EE was trying to stop the belt & another ee ran and turned belt off by releasing a lever & turning key off. Another ee gave ee a knife to cut the belt to remove ee right arm that was in tangled in tail pulley. Notified superintendent by mobile phone who called 911. EE assisted ee to pickup wrapping arm in coat. Met EMS on county road I in Donley County.
EMPLOYEE WAS BACKING AN INGERSOL AIR TRACK AIR COMPRESSOR UP A SLOPE. THE AIR COMPRESSOR SLID SIDEWAYS AND THE EMPLOYEE BACKED UP AND FELL INTO AN EMBANKMENT. THE EMPLOYEE BRUISED AND SCRAPEDHIS RIGHT HIP. HE WILL BE ON LIGHT DUTY FOR APPROX 1 WEEK.
CLEANING SAND FROM UNDER FEEDER BELT ON POWER SCREEN. EMPLOYEE WAS BLOWING LAST BIT OF SAND FROM BENEATH BELT. OPERATOR NOTIFIED EVERYONE THAT HE WOULD RESTART POWER SCREEN. INJURED EMPLOYEE F AILED TO SHUT GAURD PANEL AND CONTINUED BLOWING SAND FROM BENEATH BELT. WHEN BELT STARTED, INJURED EMPLOYEE GOT AIR HOSE CAUGHT UNDER BELT AND DRUG HIS ARM OVER ROLLER.
WAS OPERATING CRUSHER IN PIT, BOARD ON WALKING CAME LOOSE DUE TO VIBRATION FOOT GOT WEDGED BROKELEFT ANKLE.
HE WAS DRIVING A TRUCK DOWN A STEEP INCLINE. HE SAID THE DOOR CAME OPEN AND HE FELL OUT HE WAS NOT WEARING A SCRATCH AS IS REQUIRED.
AMARILLO POLICE WAS USING ONE OF MILLIGAN ABONDAN PITS TO DESTROY SOME EXPLOSIVES. THIS PIT IS 2.5 MIES FROM MILLIGAN'S OPERATION. THEY LET NE GET AWAY STARTING GRASS FIRE. MSHA MINE INSPEC TOR WAS PRESENT AT THE TIME OF ACCIDENT. FIRES STARTED 2:30PM OUT 3:45PM.
EMPLOYEE WAS WORKING ON REPAIRING BEARING IN ROLL CRUSHER. WHILE WALKING ON RUNNING GEAR FRAME A GUST OF WIND HIT HIM CAUSING HIM TO STEP BACKWARDS. HE STEPPED OFF BACK OF FRAME AND FELL APPRO X. 4' TO THE GROUND. EMPLOYEE BROKE HIS ELFT ARM.
INJURED WAS TIGHENTING BOLT ON CONVEYOR. WRENCH SLIPPED OFF OF BOLT CAUSING WRENCH TO WEDGE RIGHT INDEX FINGER TO BE CUT ON CONVEYOR FRAME.
UNSAFE SPEED DRIVER NEG CURVE AT UNSAF SPEED CAUSING LOAD OF ROCK TO SHIFT IN TRUCK BED WHICH IN TURN CAUSED TRUCK TO LAY OVER ON DRIVERS SIDE OF TRUCK.
WAS DRIVING ON CRUSHER ROAD AND A CALF RAN IN FRONT OF HIM.TO AVOID HITTING IT HE RAN UP THE EMBANKMMENT AND TURNED TRUCK OVER.NO INJURIES NOTED AT THAT TIME SECOND DAY HE HAD LOW BACK PAIN F FROM BEING TOSSED AROUND IN THE CAB.
WAS USING A SLEDGE HAMMER TO CAHNGE SHOES IN THE IMPACT CRUSHER AND STRAINED HIS AMUSCLES IN BACK.
DOOR ON BIN STU7K. FREED DOOR AND IN DOING SO CAUGHT LEFT LITTLE FINGER BETWEEN DOOR AND FRAME MASHING LITTLE FINGER.
WAS SPINNING ST5ND ON THE JAW CRUSHER, WAS TOO HEAVY AND GOT OUT OF BALANCE AND CAUGHT FINGER BETWEEN STAND AND JAW
STEPPED OFF OF 5OADER ONTO RCK, TURNED ANKLE. WHEN SWELLING STARTED HE WENT DOCTOR AND HAD IT X-RAYED.A PIECE OF NAIL EMBEDDED IN FOOT, WHICH WAS REMOVED.
WAS REMOVING BR5CE IN IMPACT, THE HAMMER ROTATED BACKWARDS AND PINNED HIS LEFT FOOT BETWWEN HAMMER AND CRUSHER WALL
WAS USING PRY B5R BAR SLIPPED AND HIT SHIN SWELLING AND BRUISING OF SHIN NO TIME WAS LOST FROM JOB
IT WAS RAINING 5ND HE STEPPED FROM POWDER TRUCK ONTO A WET BUMPER AND SLIPPED, FELL TO THE GROUND AND TWISTED HIS KNEE.
WAS PULLING UP 8CREENS AT CRUSHING PLANT AND STRAINED MUSCLES IN B ACK