Buscar en el registro

Employee was using a shovel and strained EE's shoulder.

Employee was trying to move a rock at the crusher and mashed left middle finger between two rocks.

EE using hammer to drive in track link pin. A piece of the pin hit the employee in thew right leg.

Employee was standing inside the handrails of a catwalk pulling on a wrench. The wrench slipped off and EE fell onto the catwalk and injured EE's shoulder/arm.

Employee sustained a same level fall and hit EE's knee resulting in a contusion to the knee.

Employee was swinging a hammer overhead to vibrate a bin to loosen material and strained shoulder.

The injured employee was operating a Caterpillar scraper. He just dumped his load and turned the machine around when the drivers side tire exploded. The employee suffered first degree burns to his arms and neck.

Employee was unloading a metal fabricated box at the crusher wash plant when the load shifted causing him to trip/fall. His foot landed awkwardly on a rock and resulting in a sprain to his right ankle.

Employee was working on the crusher tightening bolts, when he lost his footing and fell, resulting in a chest/shoulder strain. He refused treatment on the date of injury but requested treatment later on 1/18. The doctor evaluated the employee and released him to full duty.

Employee was using box cutters to cut a belt. The knife slipped and struck the employee's forearm.

Employee was placing beams on a slab at well #3. The sling slipped off the hook and pinched the employee's finger. This resulted in an avulsion to his left index finger requiring 11 sutures.

Employee was using a pick to remove clay that built up between the grinding teeth of a milling machine. When the pick accidentally struck one of the teeth on the machine, a sliver of metal hit the employee on the chin. Over the next 5 days the area began to fester until he was taken to the doctor for observation.

Employee was repairing/troubleshooting a water truck. He was positioned around the engine compartment. A coworker started the engine and two of his right-hand fingers were hit by the fan blade.

EE WAS USING CUTTING TORCH TO TRIM BEAMS UNDER SCALE-A PIECE OF SLAG FLEW INTO EE RIGHT EAR. SLAG WAS MOLTING HOT. THE EE HAD TO LAY ON HIS SIDE IN ORDER TO PERFORM THE JOB.

WHILE BREAKING LARGE BOULDERS WITH A PECKER ON A BACKHOE, SOME OF THE SHOT ROCK SLID OVER ONTO THE CAB OF THE BACKHOE, TRAPPING THE OPERATOR INSIDE.

EE WAS LIFTING ACCETANLYNE BOTTLE FROM TRAILER MOUNTED AREA TO TRUCK MOUNTED AREA. BOTTLE SLIPPED AND EE TRIED TO CATCH/OR STOP FALL OF BOTTLE.

THE EMPLOYEE RECEIVED FLASH BURNS TO LEFT FOREARM WHILE STARTING SECONDARY.

WHILE DISMOUNTING A D8 DOZER, THE OPERATOR'S WEDDING BAND HUNG ON SOMETHING CUTTING HIS FINGER RING FINGER, LEFT HAND.

EE ATTEMPTED TO CLEAN TAIL PULLEY WHILE RUNNING HE WAS RUNNING A PIECE OF REBAR ACROSS THE TAIL PULLEY TO CLEAN FINES OFF THE TAIL PULLEY. THE PIECE OF REBAR CAUGHT & HIT THE EE ON THE HAND.

WHILE WORKING ON MOTOR CONTROL OF FEEDER AT THE 30" CHEMICAL LIME CONVEYOR, HE RAISED UP AND HIT HIS HEAD ON THE ANGLE BRACKET.

WHILE HANDLING RIP RAP ROCK AT THE LAB, HIS LEFT THUMB WAS SMASHED.

ROCK FELL CUT RIGHT FOREARM.

AT THE PRIMARY ROCK CRUSHER A ROCK GOT STUCK AND PREVENTED CONVEYOR BOLT FROM RUNNING. EMPLOYEE WAS PULLING ON A BOLT WHEN ROCK DISLODGED. THE MOTORS WERE NOT RUNNING, BUT THE WEIGHT OF THE ROCKS ON THE CONVEYOR BELT CAUSED THE CONVEYOR TO SUDDENLY TURN. THE EMPLOYEE WAS TRYING TO TURN THE BOLTS BY HAND AND WHEN THE CONVEYOR TURNED IT SPUN THE BOLTS WHICH CAUGHT HIS HAND BETWEEN

WHILE HELPING REMOVE WEDGES FROM JAW CRUSHER, SMASHED THUMB.

WHILE CLOSING WINDOW, EMPLOYEE CUT HIS FINGER.

EE HAD EXITED HIS PARKED HAUL TRUCK AND WALKED OUT ONTO THE 7' 8" HIGH PLATFORM ON THE FRONT OF THE TRUCK. HE THEN FELL BACKWARD ON HIS BACK AND HEAD ON THE GROUND. ALTHOUGH THE CAUSE OF THE F ALL IS UNKNOWN, THERE IS SOME EVIDENCE THAT A ROCK FELL FROM OVERHEAD AND STRUCK HIS HARD HAT IMMDIATELY BEFORE HE FELL. HE SUSTAINED HEAD LACERATION AND SPINAL INJURY.

EE WAS HOLDING AN OIL PAN WHEN A SLIVER OF STEEL CUT HIS HAND.

EE WAS USING HAND DRILL WHEN IT TWISTED WHILE HE HELD DRILL.

EMPLOYEE WAS USING STEEL BAR TO PRY ROCK WHEN HIS FINGER WAS LACERATED.

A WHEEL WAS REMOVED FROM TRUCK AND PLACED AGAINST WALL--WHEEL FELL STRIKING EMPLOYEE ON FOOT.

EMPL WAS WORKING WITH STEEL CABLE WHEN BURR PUNCTURED SKIN.

OPER DUMP TRUCK BY HAULING DUMPING CRUSHED STONE IN STOCKPILE PLACED TRUCK IN FORWARD JUMPED OUT BEFORE FALLING OVER BLUFF

EE WAS CLEANING CONVEYOR WHEN HE FELL TO GROUND.

EMPLOYEE WAS PULLING ON V BELT WHEN HE PULLED MUSCLES IN LOWER ABDOMEN.

SHOVELING GRAVEL WHEN HE PULLED MUSCLES IN BACK AND GROIN

USING COME ALONG IT BROKE STRUCK EMP IN MOUTH

EMPL CLAIMS MUSCLE SORENESS IN BACK FROM MOVEMENT OF LOADER.

EMPLOYEE WAS GETTING OFF EUCLID TRUCK AND DID NOT STEP ON LOWER RUNG OF LADDER CAUSING HIM TO FALL TO GROUND.

EMPLOYEE WAS REMOVING CUTTING BIT FROM DRILL WHEN WRENCH SLIPPED STRIKING HIS KNUCKLE.

EMPLOYEE WAS OPERATING LOADER AND APPROACHED STOCKPILLE AT AN ANGLE CAUSING STEERING WHEEL TO JERK HIS ARM.

EMPLOYEE WAS OPENING DOOR ON LOADER WHEN HE CUT HIS FINGER ON SHARP EDGE

EMPLOYEE WAS STEPPING OFF LOADER WHEN HE SLIPPED AND HIT GROUND WITH HIS LEG.

EMPLOYEE WAS CHIPPING WELDING SCALE WHEN SOMETHING GOT INTO HIS EYE.

JUMPED OFF LOADER STRUCK PC OF BLOCKING CAUSING HIS ANKLE TO TURN.

USING GRINDER AND NOT WEARING GOGGLES.

EMPLOYEE WAS USING A KNIFE TO CUT BELTING-KNIFE SLIPPED & STRUCK HIS FINGER

EMPLOYEE WAS MOVING A CROSS TIE TIMBER WHEN HE SLIPPED AND FELL ON A PIECE OF METAL.

EMPL USING HAMMER WHEN HE STRUCK HAND WITH HAMMER.

EMPL WAS PICKING UP BUCKET OF WATER WHEN HE SLIPPED & PULLED MUSCLES IN BACK.

EMPLOYEE PICKED UP AN ELECTRIC MOTOR WHEN HE PULLED MUSCLES IN HIS BACK.