Buscar en el registro

Employee experienced pain in low back while unloading a wear bar from EE's truck.

Employee was performing maintenance involving removal of a hydraulic cylinder on a bulldozer. While loosening a fitting using an impact gun, residual hydraulic pressure was released, causing a high-pressure spray of hydraulic fluid to contact the employee's head, arms, chest, and shoulders. Employee experienced tingling and was evaluated in the ER; no serious injury was found.

Employee tripped and fell over a pallet while carrying containers of D.E.F.

Employee was working from a ladder and using an alignment bar while installing a new chute and and felt pain in left shoulder.

employee was lifting a crate into a loader bucket

Employee felt pain in lower back while lifting a battery.

While tramming dozer along haul road, employee drove over shot rock on the haul road causing the front end of the dozer to slam against the ground which cause the air ride seat suspension to bottom out.

Employee slipped off track/platform of dragline and landed face up on the ground.

Employee twisted left knee while dismounting Co# 976 drill after fueling.

Victim suffered heat stroke due to dehydration and extreme weather conditions.

Employee was climbing down ladder to exit dragline when EE's foot slipped and EE struck EE's left elbow on a ladder wrung. Employee attended PT for elbow pain. MRI was performed in May 2025 showing a torn ligament. Employee did not miss any time from work until June 17, 2025.

Foreign body lodged in right eye during grinding/welding operations.

Employee slipped and fell on ice.

Employee slipped on ice and twisted knee while walking outside.

The front tires of the truck lifted off the ground while ascending a ramp. Employee struck right leg off something in the cab.

Employee was lifting/carrying a container full of liquid when EE felt a sharp pain in EE's left lower abdomen. 1st day of lost time was 10/15/2024.

Employee was exiting loader and missed the bottom step injuring right elbow and shoulder. Employee worked regular duty up until 8/21/24. First day off work is 8/22/24.

Blaster was dropping 50 lb packages of blasting agent into boreholes and felt a sharp pain in EE's back.

While trying to remove a keeper out of a shovel tooth, employee was holding a punch and missed the punch and hit their hand with a sledge hammer.

While changing hammer on drill, with J wrench and chain wrench, continual lifting of both wrenches over several hours caused employee to suffer low back pain.

Employee fell to ground while exiting loader landing on both feet. Several days later while exiting loader, ladder broke and employee fell to ground landing on buttock. Employee continued to work full duty until 09/13/24. 1st day of lost time is 9/14/24.

Employee was attempting to lift and drag a cable when EE felt pain in low back.

EMPLOYEE SLIPPED AND FELL TO GROUND WHILE CLIMBING DOWN LADDER OF LOADER.

Employee was operating a loader with worn pins. Excessive bouncing caused severe back pain. Employee's first day off work from this injury was 4/26/24.

Employee was riding in the rear of a service truck and had hand resting on the crane perch. The truck leaned to one side causing EE's hand to be caught between the crane boom and perch.

Employee was walking from the truck in the truck parking area to the mine office when EE tripped and fell on uneven ground.

Employee was cleaning tracks on drill rig with track shovel. Hit something hard with shovel and heard/felt left shoulder pop.

5/12 tripped and fell on an uneven sirive screen plant (S190) 5/25 slipped getting off a loader (Cat 981G loader co#1071)

Non-employee was crossing haul road on a motorcycle. Individual lost control; and crashed causing injury. EMS called to the scene. MSHA notified.

Employee was exiting off the work vehicle when EE felt a pinch in the lower left side of back that had the pain go down the left side of EE's leg into the foot.

inclement weather when employee was hosing down a haul truck that was recently repaired from a hydraulic hose busting. When they came around the front of the truck, they slipped and fell

This miner was found unresponsive in the back of a lube truck. 911 and MSHA were immediately notified. Upon further investigation it turns out this was the result of a non work related medical condition.

EE was thawing a pipe when it released and swung back. The water that came from the pipe knocked EE down. EE braced self with hands upon falling and jolted right shoulder.

Walking to the truck from the load out area when EE tripped over a mesh screen and fell.2

Carpel tunnel of right hand due to repetitive motion throughout EE's years working with the company.

Coming off the steps of a Haul Truck, employee slipped off the last step and felt right knee pop.

Moving the head on the drill up & down for mechanic to work on and the steel hammer came back and pinned EE's left elbow between it and the drill.

repetitive motion for the past 11 years while operating a dragline/shovel

SNOW - PLOWING INCIDENT. EE was plowing snow with a loader, broke through frost and hit solid ground. Machine stopped abruptly. EE was thrown into loader windshield.

Employee was walking out of the wash house when EE slipped and fell on the ice landing on right side.

Sore hands that are getting worse, went to OCC Medicine for evaluation. *Repetitive motion causing bilateral hand pain. EE has been working up until went for surgery on 2/14/2022. EE will be off for a while.

Employee was climbing on the machine to start shift when they slipped. The cause may have been some mud and frost on the machine. Employee did state they cleaned off their boots as best as possible.

While getting off the fuel truck, EE slipped on the step while hanging onto the bars and pulled something in the left shoulder and lower back.

WHILE WALKING FROM EMPLOYEE PARKING LOT TO EQUIPMENT IN THE DARK, THEY SLIPPED AND FELL TWISTING RIGHT KNEE.

An excavator operator was backing up a haul road and repairing the roadway as they traveled. The excavator traveled underneath a 69KV powerline owned by PPL. Unknown to the operator, the powerline arced to the boom of the excavator which cause a brief power interruption. The operator was only made aware of this at 11:30 am when an electrician showed up on site to investigate.

EE was climbing up the excavator for shift when foot/heel slipped on the track causing left knee to twist.

Loading drill steel onto a truck when the drill steel moved while being lifted. Right index and middle fingers were pinched between the drill steel and the truck

EE was moving full barrels when one slipped. EE went to catch the barrel and felt a pull in groin and abdomen areas.

While dismounting CM785 drill, employee's hands missed grab handles & employee fell down 2 steps to the ground.